Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
A3N network servo drivers:
Power range: 100W-1500W
Support MODBUS RTU and EtherCAT communication protocol (not support high-speed pulse);
Support 2500ppr incremental encoder (optional);
Support 17Bit bus absolute encoder (optional);
Support optional curve function;
Support two-way probe auxiliary function, latch position;
With CTH300 series PLC, set up a network of 100Mbps high-speed bus EtherCAT ,especially suitable for multi-axis control system.
| Specification | Input power supply | Main power supply | Single phase 220VAC±15%,50/60Hz |
| Control power supply | 24VDC±15% | ||
| Encoder feedback | 2500ppr incremental photoelectric encoder, bus absolute encoder | ||
| Cooling method | Natural cooling(100W、200W、400W),air cooling(750W~1.5KW) | ||
| Control mode | FOC (magnetic field positioning control) and SVPWM (space vector modulation). | ||
| Communication function | Modbus protocol (support for broadcasting), CANopen Bus protocol | ||
| Brake resistance | Internal brake resistance/external brake resistance (mainly for rapid start and stop) | ||
| Protection function | Over-voltage, under-voltage, over-current, overload, over-heat, over-speed, over-position error, encoder feedback error, over-braking rate, over-stroke, EEPROM error, etc | ||
Display and operate | 5-digit LED display and 5-digit button operation | ||
| Parameter Setting | Display panel or MagicWorks Tuner software | ||
Speed variation rate:Load variation rate | 0 ~ 99% : less than 0.1% (at rated speed) | |
Rated voltage rate | ±15% : 0% (at rated speed) | |
Temperature variation rate | 25±25℃ : below ±0.1% (at rated speed) | |
Frequency Characteristics | 2KHz (when JL=JM) | |
Integrated PLC control function | None | |
Encoder output output | Differential signal frequency division output | |
Digital input (7DI) | Servo enabler, de-alarm, forward/counterclockwise stroke limit, internal speed selection, torque limit selection, gear ratio switch, mode switch, gain switch, pulse input disable, zero speed clamp, position deviation removal, motor direction switch, can be selected by IO multiplexing functional register | |
Digital output (4DO) | Servo ready, alarm output, torque limit output, positioning complete, speed arrival, zero speed detection output, brake release output, can be selected by IO multiplexing functional register | |
Analog input | Can be customized | |
Position control mode Maximum input pulse frequency | Differential mode: 500kHz, open collector mode: 200kHz | |
Input pulse signal | Pulse + direction, A phase +B phase, CW+CCW | |
Instruction control mode | External pulse instruction / 16-segment communication register instruction | |
Feedforward compensation | 0 ~ 1000‰ (set resolution 1‰) | |
Position error | 0 ~ 32767 instruction units (set resolution as 1 instruction unit) | |
Electronic gear ratio | N/M times, N: 1 ~ 10000 | |
Speed control mode instruction control mode | External analog instruction / 8-segment internal speed instruction / 32-segment communication register instruction | |
Instruction smoothing mode | Low-pass filtering, smoothing time constant 0~2500 (x10us) | |
Torque limits | Internal parameters | |
Torque control mode instructions control mode | External analog instructions / 32-segment communication register instructions | |
Instruction smoothing mode | Low-pass filtering, smoothing time constant 0~2500 (x10us) | |
Speed limit | Internal parameters | |
Operating temperature | 0℃ ~ 45℃ | |
Preservation temperature | -20℃ ~ 70℃ | |
Temperature | Work/save ≤90% RH below no condensation | |
IP level | IP20 | |
Installation site | Free of corrosive gas, flammable gas, oil mist or dust | |
Installation method | Vertical installation | |
Elevation | Elevation ≤1000m | |
Atmospheric pressure | 86kPa ~ 106kPa | |
