Welcome Customer !

Membership

XwbooElectrical & ElectronicsHigh Voltage ApplianceHigh Voltage TesterAC DC Withstanding Voltage Tester
  • $item.Title
  • $item.Title

AC DC Withstanding Voltage Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
High Voltage Tester
Place of Origin
HuBei, WuHan
1.Rated voltage:AC:0.5kV~5kV ±5% 2.Leakage current setting range:AC:0.2~20(mA) adjustable 3.Leakage current set precision:±5%4.Power:100VA.5.Output waveform: 50Hz Sine waveform
Introduction


The HM2670 series AC DC Withstanding Voltage Tester is a universal high voltage testing set, which is widely used in the withstand voltage test of electrical device, bakelite appliances, transformers, power cords, motors, power plugs, sockets, cables, etc., as well as various electronic and electrical products Withstand voltage testing. With the establishment of national safety standards, the withstand voltage tester has become an indispensable tester for various electrical manufacturers, electronic products and other manufacturers.


Hot tags:withstand voltage tester. Ac hipot tester, high voltage tester, ac high voltage test equipment,ac hipot instruments, ac dielectric test set supplier


Working Principle


1



HM2670 AC hipot tester main technical parameter


1. Rated voltage:AC:0.5kV~5kV ±5%

2. Leakage current setting range:AC:0.2~20(mA) adjustable

3. Leakage current set precision:±5%

4. Power:100VA.

5. Output waveform: 50Hz Sine waveform

6. Timing:1~99(s)±5% manual∞ adjustable.

7.Power:AC:220V±10% 50Hz±2Hz.

8.Relative Humidity:≤75%RH, Temperature :0℃~40℃.

There is no strong electromagnetic interference source around, no large amount of dust and corrosive gas, good ventilation.

9. Power consumption: static power consumption < 30VA.



Panel as below image


2

(1) Power switch: Before turning on this switch, be sure to read the section "Precautions for Use".

(2) "External control": used to remotely control the start and reset of the instrument.

(3) "TEST": Start button, when the instrument is not in the "over-leakage" state, press this button, the "test" light will light up, adjust the "voltage adjustment" knob until the voltmeter indicates the desired voltage.

(4) "REST": Reset button. After the withstand voltage test is over, press this button to reset the output voltage (ie disconnect the power). When an over-leak alarm occurs, press this button to reset the instrument.

(5) "Preset adjustment" knob: used to adjust the upper limit preset value of leakage current.

(6) "Preset/Measure" button: switch mA display value to preset value or measured value.

(7), (8), (9) "Leakage current selection" button: used to switch the current gear.

(10) "Timing" button: used to switch the timer timing or not.

(11) "Timer": used to set the test voltage output duration, which can be selected from 1 to 99 (s).

(12) "Display": used to display time, current, and voltage values.

(13) "Test" light: This light is on to indicate that the high voltage is sent to the output terminal, and the high voltage is disconnected when the light is off.

(14) "Excess Leakage" light: When the current in the object under test is greater than the preset value of the leakage current switch, this light will be on.

(15) "Voltage adjustment" knob, used to adjust the size of the test voltage, turn it counterclockwise to decrease.

(16) "High voltage output port": AC test voltage output terminal.

(17) "RETURN": The other end of the test high voltage, usually connected to the outer shell or the other end of the test object, also called the return end of the test current.


details


FAQ


1.Can you provide training for us?

Yes, we can provide free training for all customers at our company.

If you require training on-site, we also can arrange accordingly.


2.What is your after-sale service

We have 10 seasoned technical engineers in our after-sale service team. We promise that our engineer can give answers within 1 hour and deal with equipment failure within 24 hours in time.


3.What’s the warranty period ?

Our warranty period is one year .

The product can be replaced within 1 month, can be repaired for free charge for one year and maintenance for lifetime.

What is more, our warranty can be extended only charged small warranty fee


4.What kind of Certificate you can provide ?

We can provide CE certificate , and the third party Calibration Certificate (can be stamped by CNAS),other certificates we also can make according to your requirements.

3

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend