Air Cooler Air cooler use the ambient air as the cooling medium, relying on the finned tube to expand the heat transfer area and strengthen the heat transfer outside the tube, the running fans make the air temperature rise after the air flow through the finned tube bundle to take away the heat load of the medium inside the tube, to achieve the purpose of condensing and cooling the medium inside the tube. The Air cooler is widely used in chemical industry, petrochemical, Oil refining, Power stations, waste incineration power plants and steel mills.
Induced type Air Cooler The bundle of tubes is located in the air inlet side of the fan. The fan can form a good protection to the finned tube to reduce the influence of sunlight, wind, sand, rain, snow and so on, so that the air-cooled appliance has stable heat transfer performance; At the same time, it can evenly distribute the air with less heat circulation and low noise. Forced type Air Cooler The tube bundle is located in the air outlet side of the fan. It is suitable for high temperature process medium, easy to clean and repair, maintenance with low energy consumption. Air cooler using air as cooling medium is not only a choice of low investment cost and low operation cost, but also choice of saving limited water resources, reducing the discharge of industrial sewage and protecting the natural environment. Air cooler is widely used in liquefied natural gas, petroleum, electric power, petrochemical, chemical, fine chemical, iron and steel and energy fields.
Air-cooled Condenser The refrigerant vapor enters from the inlet pipe and is distributed to each serpentine pipe. It gradually cools in the pipe, and the liquid flows down for gravity, and finally discharged from the liquid collection pipe. The cooling medium (air) is forced to flow through the finned tube by the fan, and the condensation heat is emitted into the ambient air.
The refrigerant vapor enters from the inlet pipe and is distributed to each serpentine pipe. It gradually cools in the pipe, and the liquid flows down for gravity, and finally discharged from the liquid collection pipe. The cooling medium (air) is forced to flow through the finned tube by the fan, and the condensation heat is emitted into the ambient air.
Specialty: 1. Low cost to run without water 2. Easy to install and operate, without any supporting equipment. 3. Eco-friendly 4. Especially suitable for Water deficient area
Application Area: 1. Refrigeration industry, cold storage engineering ; 2. Agriculture, food, hotel, chemical industry; 3. Supporting central air-conditioning main equipment;
|
Shanghai Bao Feng Machinery Manufacturing Co., Ltd (SPL) is specialized in Design, Development, Sales and Service of Projects in the field of Food, Chemical, HVAC Energy Efficient Equipment. The high-tech enterprise is a wholly owned company of Lianhe Chemical Technology Co., Ltd. (Share code 002250). Our main products are Evaporative Condenser, Hybrid Cooler, Petrifaction Air Cooler, Turbine Exhaust Steam Air cooler, Air cooler, Closed Loop Cooling tower, Refrigerating auxiliary equipment, Thermal Ice Storage and pressure vessel of Grade D1 and D2. There are more than 30 series and 500 types products that are widely used in Petrifaction, Chemical industry, Methanol, Dimethyl ether, Metallurgy, and Power industries. SPL is located in Baoshan City industry park in Shanghai, with very convenient traffic, close neighbored to the outer ring of Shanghai, and 13km away to Hongqiao international airport, and 12km away to Shanghai Railway Station. The area of SPL is 27,000m2, including main building area 18,000m2. We have gained the manufacturing permission and the design license of ASME Stamped Pressure vessel Grade D1 and D2. The company works for ISO9001:2000 management system, it is member of Shanghai Quality Association, and editor of Evaporative air cooler’s limited value and grade of energy efficiency.The products are named by Zhejiang Refrigerating Association as Energy saving, Environmental protection and Intelligent refrigerating products in Zhejiang market, and have won more than 10 national Patents. SPL has a team of Highly Qualified and dedicated Engineers personnel is dedicated to provide High-Tech, Sustainable and Reliable Solution. With decades of experience on R&D and Manufacturing. The team includes 6 Senior Engineers, 17 Engineers, 24 Assistant Engineers, and 60 Technicians. The company owns many advanced manufacturing facilities and inspection instruments from home and aboard, such as Automatic welding center, X-Ray machine, Ultrasonic machine, Shock testing machine, Tension testing machine. SPL’s industry leading position is guaranteed by introducing latest technology for home and aboard, taking the Advantages, and adopting Advanced and Latest Manufacturing technique and skill. We adhere to the quality principle of “in pursuit of innovation and perfectness by keeping improving the product quality so as to create a first-class brand and company”, and the quality objective of “achieving 99% pass rate of products”, with sincere attitude, strong technological strength, the strict management, we try to meet the demand of our clients, and give ear to each of them, thus improve our product and service constantly. SPL holds business idea of “Honesty, High-quality, Responsibility and Win-win”, is striving to provide the most optimized solution, the best-quality products, and the most excellent service to our customers.