Membership
Help
Zhejiang yonjou Technology Co., Ltd.
Zhejiang yonjou Technology Co., Ltd.
Summary
An air driven diaphragm pump moves fluid by the alternate and repeated back-and-forth movement (strokes) of two flexible membranes or diaphragms mounted on a common shaft (Figure 1). Although diaphragm pumps can be driven directly, with the shaft connected directly to a motor, an air driven double diaphragm pump pump uses compressed air with a sophisticated distribution system directing the air alternately to two air chambers on the opposite sides of the diaphragms.

Application
●Corrosive chemical
●Volatile solvents
●Shear-sensitive foodstuffs
●Pharma product
●Sticky fluids
●Dirty water
●Smaller solids
●Creams
●Abrasive slurry
●Oils and gels
Supply material of range
Pump casing material: Aluminum(AL), Cast Iron(CI), Stainless steel(SS), Polypropylene(PP),Teflon lined(PTFE)
Diaphragm: PTFE, Nitrile Butadiene Rubber(NBR), Viton
Ball valve: Nitrile Butadiene Rubber(NBR), Stainless steel(SS), PTFE
Valve seat: Nitrile Butadiene Rubber(NBR), PTFE
Specification data
| Model | Size | Max Capacity | Max Pressure | Max air consumption | Max air pressure | Max particle diameter | |||
| MM | INCH | M3/h | USGPM | M | PSI | M3/MIN | BAR | MM | |
| QBK10 | 10 | 3/8 | 1.5 | 6.60 | 80 | 116 | 0.14 | 8.0 | 2.5 |
| QBK15 | 15 | 1/2 | |||||||
| QBK25 | 25 | 1 | 9 | 39.63 | 1.12 | 5 | |||
| QBK40 | 40 | 1-1/2 | 12.5 | 55.04 | 1.35 | ||||
| QBK50 | 50 | 2 | 20 | 88.06 | 2.8 | 6 | |||
| QBK65 | 65 | 2-1/2 | 21.5 | 94.66 | 2.8 | ||||
| QBK80 | 80 | 3 | 25 | 110.07 | 3.0 | 10 | |||
| QBK100 | 100 | 4 | |||||||
How the air distribution system works
The YONJOU QBK built-in air distribution system incorporates two moving parts: the air valve spool and the pilot spool, which also are the heart parts for the system. The pressurized air start ingressing into one side hole of pilot spool and then trigger the air valve move. It directs pressurized air to one air chamber while exhuasting the other. The air causes the main shaft/diaphragm assembly to shift to one side (discharging liquid on that side and pulling liquid in one other side). When the shaft reach to the end of the stroke, the diphragm plate actuates the pilot spool. The air start ingressing into other side hole of pilot spool then trigger the air valve to otherside too.
