Welcome Customer !

Membership

XwbooGeneral PartsPumpHigh-pressure PumpAR60 Grease Pump
  • $item.Title
  • $item.Title

AR60 Grease Pump

Zhengzhou Auto Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
High-pressure Pump
Place of Origin
,
AR60 lubrication pump is the main part of AR60 single line lubrication system.

 

AR60 Grease Pump

  Application

  Applicable to machinery, metallurgy, ports, docks, ships, lifting, carpentry, food, construction and other mechanical equipment

 

 

 

 

 

 

 

 

 

 

AR60 Grease Pump

  Working principle

  Take AR60H for example, gear pump begins working when the pump receive the signal from monitor. The grease is sucked by gear pump and pressurized into the exit. And the pressure unloading valve is opened, and the pump module pressurizes the mainline. Then the grease cylinder connected to the mainline begins to work so as to ensure the supply of grease through a conveying device that conveys the grease from the bottom of the reservoir. Grease pressurizes mainlines and causes distributors to dispense preset volumes of grease to open overflow valve, redundant grease reflows to the reservoir through the orifice in overflow valve. The pump module receives the signal from monitor and the gear pump stops. Finally, the pressure unloading valve opens, grease in mainlines reflows to the reservoir. Then the pressure in mainlines is about 0.05~0.1Mpa.

  Technical parameters of ALP60 series piston pump

【Note】 cold winter in the winter, please choose the same level of low-temperature grease.

【Note】 cold winter in the winter, please choose the same level of low-temperature grease.

The harsh working environment is challenging the health of the equipment. The loss caused by the unexpected shutdown of the equipment is often huge. The AUTOL OTC centralized lubrication equipment can reduce the equipment failure rate by 50% and greatly reduce the huge loss caused by the equipment shutdown.Extend the service life of the core components and system maintenance cycle to reduce maintenance and repair costsNo matter what brand model equipment, there will always be bearings and gears need to be lubricated. AUTOL The special lubrication system can effectively reduce the friction resistance, reduce the surface friction, reduce the friction surface temperature, prevent corrosion, shock absorption and sealing effect, thus extending the key parts of more than 60% service life and extend the equipment more than 10% service life. Simplify service tasks, extend cycle intervals for system maintenance, protect equipment in a variety of climatic conditionsIntelligent remote lubrication monitoring reduces maintenance costLarge-scale equipment, centralized lubrication system are in a separate working state, not easy to remote centralized monitoring and management. AUTOL ATV intelligent monitoring system to intelligent Internet as a carrier from the automatic centralized lubrication system to collect signals and to assess. The dedicated sensor can record and store the operating data of the lubrication system in real time, and can report the lubrication data anytime, anywhere in real time, provide fault analysis and troubleshooting plan to prevent potential operation failure, effectively reduce the maintenance cost, equipment Management more efficient, more secure, more convenient
Similar Product Recommend