Membership
Help
SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
SHANDONG YUDONG SUNSHINE MACHINE CO.,LTD.
YJX-1010 machine is suitable for stamping/ typing, punching hole and shearing of angle beam/steel profiles in the fields of electric power, communication, metal fittings, three-dimensional garage, elevator manufacturing, air-conditioning manufacturing, etc. It can realize the one-time hole forming of oblong holes and special-shaped holes by changing

2. Basic configuration of the machine
2.1 Mechanical part
No. | Item | YJX1010 |
1 | Total length | 24200mm |
2 | Quantity of feeding table | 3 group |
3 | Quantity of overturning tables | 3 group |
4 | Quantity of feeding driver | 1 group |
5 | Length of feeding passage | 15800mm |
6 | Length of the host | 2100mm |
7 | Length of finished passage | 6m |
8 | Pneumatic control system | 1 Group |
9 | Hydraulic control system | 1 Group |
10 | Feeding direction | According to user requirements |
11 | Integrated hydraulic station | Yes |
12 | The purchaser is responsible for the part | Embedded plates and anchor bolts required for the cement foundation and equipment of the installation site shall be prepared according to the foundation drawing provided by the supplier |
2.2 Electronic control part
1 | Numerical Control System | PLC Control System |
2 | Driving System | Panasonic Servo Motor |
3. Technical parameters of the machine
No. | Item | Commodity |
YJX1010 | ||
1 | Angle Beam Range(Mm) | 38*38*3-100*100*10 |
2 | Max Punching Diameter | Φ26mm(Q235, Q345), punching of special-shaped holes and oblong holes can be achieved by changing the mold |
3 | Max Punching force(KN) | 700KN |
4 | Punching Side | 2 Sides |
5 | Number of die per side | 3 Pcs |
6 | Typing ability(KN) | 700KN |
7 | Qty of typing groups | 4 Groups |
8 | Digit number of each group | 12 Pcs |
9 | Character size | (L*W*H)14*10*19mm |
10 | Shearing force(KN) | 1250KN |
11 | Shearing method | Single Blade Shearing |
12 | CNC Axis | 3 Axis |
13 | Length of Blank Workpiece(M) | 12 M |
14 | Max Length of Workpiece(M) | 12 M |
15 | Length of finished workpiece(M) | 10 M |
14 | Discharging method of finished products | The finished material channel is pushed manually and turned out to one side. The power source for turning out is pneumatic. |
16 | Angle Beam feeding speed | Max 90m/min |
Punching speed(times/min) | Average 50-60 times/min | |
17 | Programming Mode | Input by keyboard,RS232,CAD floppy disk input &USB interface |
18 | Lubrication method | Equipped with automatic lubrication |
19 | Fabrication Precision | Hole diameter tolerance: 0-0.8mm |
Dmax-Dmin:≤1.2mm Aperture roundness tolerance range: Dmax-Dmin: ≤1.2mm | ||
Hole perpendicularity error: ≤0.36mm | ||
Distance tolerance of two adjacent holes in the same group: ±0.5mm | ||
The hole distance tolerance of two non-adjacent holes in the same group: ±0.7mm | ||
End distance tolerance : ±1.2mm | ||
Shearing length tolerance: ±1mm | ||
Verticality of cut surface: ≤1.2mm |
4. Working Environment
1 | Power Supply | 3 Phase 4 Wire System |
2 | Voltage | 415V±10% |
3 | Frequency | 50Hz |
4 | Operating temperature | 0℃-40℃ |
5 | Relative Humidity | <90% No condensation |
6 | Air Compressed | Pressure: 0.8MPa Flow rate: 1.0m³/h |
5. Machine Configuration Introduction
YJX-1610 New Type High-Speed CNC Angle Steel Punching Typing & Shearing Machine is mainly composed of feeding table, turning feeding table, feeding channel, feeding trolley,punching unit, typing unit, shearing unit, finished material channel, electrical system, hydraulic system, etc.