Membership
Help
Qingdao Yosion Intelligent Technology Co.,Ltd.
Qingdao Yosion Intelligent Technology Co.,Ltd.

Automatic Iron Pellet Strength Tester
The automatic pellet press is an automatic equipment for testing the strength of pellets and sinters. It adopts a servo control system. The product complies with GB/T14201-2018 "Blast furnace and direct reduction iron pellets compressive strength Determination", ISO4700 and other standards for testing. Applicable to: Iron and Steel Metallurgy, Pellet Mining, University/Research Institute, Entry-Exit Inspection and Quarantine Bureau.

· The pellet crushing device adopts a servo control system, which can adjust a fixed speed at a constant speed between 10mm/min~20mm/min during the whole test. The national standard recommends 15mm/min±1mm/min to make the test data more Accuracy helps to ensure the sample pass rate and reproducibility. The servo control system can be used continuously and efficiently for a long time with good stability.
· When the equipment meets any of the following conditions, the test ends and the maximum load compressive strength value is obtained during the test. (A) The load drops to 50% of the recorded maximum load value, or appears to be higher than the recorded maximum load; (b) The distance between the press plates drops to 50% of the initial average particle size of the sample.
· Electric magnetic vibrating plate automatic feeding device, pellet crushing and automatic feeding are carried out simultaneously, saving test time;
· Rotary automatic cleaning device, without manual cleaning, automatically completes the cleaning of waste pellets;
· During the test, the test data is displayed in real time, including: each pellet crushing force value, maximum value, minimum value, average value, relative frequency distribution, and pressure curve diagram;
· Long-term storage of test data, historical test data can be inquired in different ways, and test reports can be printed;
·The equipment has a pressure overload protection system to prevent damage to the sensor due to misoperation;

Model | YX-PT1000S |
Application | Crush the pellets, test pellet strength |
Test efficiency | 60 pellets takes about 30 minutes |
Maximum number of pellets once | 120 |
Platen speed | 10-20mm/min |
Pellet size | Φ10mm~16mm |
Sensor maximum pressure | 10KN or 15KN(≥1019.7kgf) |
Sensor accuracy | C3(≥0.03%) |
Sensor error | ≤±0.020%FS |
Transmitter accuracy | ≥0.1%F·S |
Transmitter protection level | IP65 |
Voltage | AC 220V±5%,50Hz |
Power | 0.75KW |
Weight | 120kg |

| Host | A8-PT1000S |
| Touch screen | 7 inch |
| Computer | |
| Printer | |
| Software | |
| Sensor | 10KN (about ≥1019.7kgf) ,Accuracy: C3 (not less than 0.03%) |
| Transmitter | Accuracy: better than 0.1% F·S Protection grade IP65 |
| Automatic loading device | |
| Vibration plate | Magnetic vibration |
| Automatic cleaning waste material device | Rotating disc rotation cleaning |
| Automatic crushing device | servo motor |