Welcome Customer !

Membership

XwbooGeneral PartsPumpPiston PumpAxial Variable Piston Pump PVM
  • $item.Title
  • $item.Title

Axial Variable Piston Pump PVM

Poocca Hydraulic (Shenzhen) Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Piston Pump
Place of Origin
,
PAPVM Series pumps are open circuit, axial piston designs. A variety of control options allows the pumps to perform most efficiently in a specific application. Efficiency of the pump controls allows down-sizing of system cooling needs, saving up front cost in the machine. Alternatively, cooling capacity could be kept the same and the flow capability of the system increased, thus improving performance and customer satisfaction.

Axial variable Piston Pump PVM


Product description

Vickers piston plunger pumps

PAPVM Series pumps are open circuit, axial piston designs. A variety of control options allows the pumps to perform most efficiently in a specific application. Efficiency of the pump controls allows down-sizing of system cooling needs, saving up front cost in the machine. Alternatively, cooling capacity could be kept the same and the flow capability of the system increased, thus improving performance and customer satisfaction.

Name

PVM Series Variable Displacement Piston Pumps

Series

Series PVM

Sizes

018 020 045 050 057 063 074 081 098 106 131 141

Nominal Pressure

280 bar

Maximum Pressure

320 bar

Operation Mode

Open circuit


Product parameter


Model Series

Maximum



Maximum Flow at 280 bar (4000 psi)

Geometric

Maximum Pressure bar (psi)

l/min (USgpm) – Average measured flow rate

Displacement cm3/r (in3/r)



@1800

@1500

@1200

@1000

Nominal

Peak**

r/min

r/min

r/min

r/min

PVM018

18 (1.1)

315 (4568)

350 (5000)

31 (8.2)

26 (7)

21 (5.5)

17 (4.5)

PVM020

21,1 (1.29)

230 (3300)

280 (4000)

35 (9)

29 (8)

23 (6)

19 (5)

PVM045

45,1 (2.75)

315 (4568)

350 (5000)

76 (20)

65 (17)

49 (13)

42 (11)

PVM050

50,0 (3.05)

230 (3300)

280 (4000)

87 (23)

75 (20)

62 (16)

49 (13)

PVM057

57,4 (3.50)

315 (4568)

350 (5000)

102 (27)

85 (22.4)

66 (17.4)

54 (14.3)

PVM063

63,1 (3.85)

230 (3300)

280 (4000)

111 (29)

93 (24)

74 (19)

60 (16)

PVM074

73,7 (4.50)

315 (4568)

350 (5000)

127 (33.5)

106 (28)

86 (22.7)

70 (18.5)

PVM081

81,0 (4.94)

230 (3300)

280 (4000)

139 (37)

116 (31)

93 (25)

76 (20)

PVM098

98,3 (6.00)

315 (4568)

350 (5000)

170 (45)

141 (37)

112 (29.6)

92 (24.3)

PVM106

106,5 (6.50)

230 (3300)

280 (4000)

187 (49)

155 (41)

123 (32)

102 (27)

PVM131

131,1 (8.00)

315 (4568)

350 (5000)

215 (57)

178 (47)

141 (37)

118 (31)

PVM141

141,0 (8.60)

230 (3300)

280 (4000)

238 (63)

199 (53)

158 (42)

131 (35)

Maximum
Operating
Speed

Maximum Input Power at 280 bar (4000 psi) kw (hp)*@88% M.E.

Maximm
Torque 

at
280 

bar 

(4000 

psi)

Approximate
Weight

Series

r/min

@1800 r/min

@1500 r/min

@1200 r/min

@ 1000 r/min

Nm (lb-ft)

kg (lb)

PVM018

1800

16 (22)

13 (18)

11 (15)

9 (12)

84 (62)

15 (33)

PVM020

1800

14 (18)

11 (15)

9 (12)

8 (10)

73 (54)

15 (33)

PVM045

1800

41 (55)

34 (46)

27 (37)

23 (31)

221 (163)

24 (52)

PVM050

1800

35 (47)

30 (40)

28 (38)

23 (31)

190 (140)

24 (52)

PVM057

1800

52 (70)

44 (59)

36 (49)

29 (39)

272 (201)

36 (79)

PVM063

1800

42 (57)

36 (48)

29 (39)

24 (32)

228 (168)

36 (79)

PVM074

1800

63 (84)

52 (70)

42 (56)

35 (47)

334 (246)

45 (99)

PVM081

1800

56 (75)

46 (62)

35 (47)

28 (37)

286 (211)

45 (99)

PVM098

1800

88 (118)

72 (97)

58 (78)

48 (64)

464 (342)

55 (121)

PVM106

1800

72 (97)

60 (80)

48 (64)

40 (54)

383 (282)

55 (121)

PVM131

1800

113 (152)

94 (126)

75 (101)

63 (85)

596 (440)

66 (145)

PVM141

1800

94 (126)

79 (106)

63 (85)

53 (71)

497 (367)

66 (145)


Detailed images

The PVM Series also contains a strong proven rotating group allowing the pumps to handle pressures to 315 bar (4568 psi) continuous with less maintenance cost. High-load bearings and a stiff drive shaft help provide very long life at rated industrial conditions, reducing operating costs and extending operating life.

PVM Series pumps feature a saddle-type yoke with steel-backed polymer bearings. The stiff yoke reduces deflection and allows even loading of bearings, improving life. A single control piston reduces loading on the yoke, resulting in reduced pump size which allows installation in tighter locations.

-2_01(001) -2_03(001)

PVM Series pumps operate at a level of quietness that exceeds the requirements of today’s demanding work conditions. The pumps feature a unique three-piece envelope (flange, housing and valve block) specifically created for low fluid-borne and structure-borne noise levels. Another pump feature – a bimetal timing plate – improves pump filling characteristics which, in turn, reduce fluid-borne noise and extend pump life.

PVM Series pumps reduce, or in some cases remove, the need for damping barriers between the noise source and the operator. This saves money on

the installed cost of the system while improving customer comfort.

An adjustable maximum stop provides a means of tuning flow to your system, while gauge ports allow monitoring of inlet and outlet conditions.

-2_04(001) 2_02(001)

These standard features reduce system complexity and cost.

Mounting flanges are offered in SAE and ISO con- figurations, and ports are offered in SAE, ISO,and BSPP in both tube and flange versions. This provides a wide variety of installation opportunities for global machine design.

Side- or end-ported models are available to facilitate plumbing and help fit the pump to your machine space needs. Multiple drain ports allow many mounting orientations, reducing installed costs.

PVM Series pumps are capable of  operating  with many types of hydraulic fluids used in industrial systems. High-water-content and phosphate ester fluids can be accommodated, in addition to the typical petroleum based and synthetic fluids.



Applications

Applications-1

Applications-2


Our advantage

Advantage-1

Evaluation(001)


After-sales service

Warranty

Poocca Hydraulic (Shenzhen) Co.,Ltd, is located in Shenzhen North High Tech Center. It takes about 30 minutes' drive from HongKong.Our factory covers a land area of 8,000 square meters and has a production area of 6,000 square meters. At present, our company has 80 employees, including 10 engineers.With ISO9001:2015 certified Quality System, Has its own brand trademark, as many as 20 hydraulic utility model patents. we are a professional manufacturer of hydraulic gear pumps.Our teams have worked in the hydraulic field for more than 10 years and have rich experience in designing, manufacturing and processing all our products. We also have quite a lot of technicians who are skilled in machining, assembling and testing products.With the help of modern machining equipment (Flexible machining centers, CNC hobbing CNC grinding 3-coordinate measuring machines, fully automatic gear checking machines, CAT full computer controlled testing machines, etc.) our company is capable of providing various hydraulic products for led production, construction and agricultural equipment, bending machinery. Shearing machinery plastic injection machinery, metallurgy and petroleum industries and material handling vehicles.Poocca corporate values is "to provide customers with the best hydraulic products and excellent services and become one of first-grade hydraulic pump manufacturers in the world".Our ProductPOOCCA Hydraulics (Shenzhen) Co., Ltd.’s products include variable hydraulic piston pump, fixed hydraulic piston pump, variable hydraulic vane pump, fixed hydraulic vane pump, aluminum hydraulic gear pump, cast iron hydraulic gear pump, axial piston motor, diameter To hydraulic products such as plunger motors and gear motors.Variable piston pump series: A10V(S)O, A11V(L)O, A4VSO, A4VG, A7VO, A8VO, A10VG, A4VSG, PVH, PVB, PVM, PVE, PVE, PVXS, PV, PVP, PVXS, P2/ P3, PD, P1 and other seriesFixed piston pump series: A2FO, A4FO, A2F and other seriesFixed vane pump series: V series, T6/T7 series, PV2R series, SQP series, 50T/150T series, etc.Hydraulic gear pump series: AZPF,AZPG,AZPN,AZPB,AZPW,1PF2G,ALP1,ALP2,ALP3,GHP1,GHP2,GHP3 0.25-0.5,1P,PGP505,PGP511,PGP517,PGP315,PGP330,PGP365 series, etc.Orbtial motor series: J,H,S,T,2K,4K Delta,4K,6K,10K,VIS40,VIS45 Series.TC,TB,TS,TE,TJ,TF,TF Clutch,DF Brake,L,TG,BG Brake,DG Brake,TH,BH,TK Series.OMM/OML,OMP,OMH,OMEW,OMS,OMT,OMV,OMSU,WP,WR,WD,WG,WS,OMR X,OMP X,RE,TMK,TMT,TMTHW,TMV,DH & DS Series.BM1,BM2,BM3,BM4,BM5,BM6 Series.Hydraulic motor: A6VM, A6VE, A2FE, A2FM series, etc.Hydraulic parts.Excavator travel motor.Product ApplicationConstruction machinery: double pumps, single pumps, walking motors, swing motors, etc. for excavators, pavers, road rollers, presses, paving machines, drills, bulldozers, heavy excavators, road mixers, etc.Construction machinery: concrete pump truck, concrete pump truck transporter, concrete mixer truck and other hydraulic main pumps, auxiliary pumps, swing motors, and walking motors.Industrial equipment: metallurgy, mining, medicine, chemicals, plastics, die-casting machinery,Hydraulic main pumps, auxiliary pumps, motors for marine machinery, cranes, ceramic machinery, aluminum extrusion presses, etc.Ship/Aviation: pumps & motors for ship hydraulic technology industry used in ship/ship/ship deck machinery, operating systems and control systems, such as rudder ship machines, windlasses, cranes, etc.; pumps/motors and accessories for aerospace hydraulic technology industry Device.
Similar Product Recommend