Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesBattery Discharge Meter
  • $item.Title
  • $item.Title

Battery Discharge Meter

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
Among all the operating equipment and network systems which are much more informationized and automated,uninterrupted power supply is a fundamental guarantee. As a backup power supply, accumulator plays an important role in the system. Usually the battery is in the state of floating charge...
I. Brief introduction


Among all the operating equipment and network systems which are much more informationized and automated,uninterrupted power supply is a fundamental guarantee. As a backup power supply, accumulator plays an important role in the system. Usually the battery is in the state of floating charge standby,In case of alternating current loss or other accident,the battery becomes the only energy supplier for the load.

In addition to the normal service life of the battery, due to the quality of the battery itself, such as material, structure, process defects and improper use, the premature failure of the battery occurred from time to time.To test the standby time and actual capacity of the battery,to ensure the normal running of the system,it is necessary to carry out capacity checking discharge test on the battery bank regularly or on demand according to the power system maintenance procedure. In order to detect single battery which is already failure or near failure , and to replace them, to ensure effectiveness of the whole battery, or estimate the life expectancy of the entire battery group.

After years of research and development, we have successfully developed a series of intelligent battery discharge meters with our proprietary technology.The tester can be used as discharge load when the battery is off-line, to realize constant discharge current of the set value by continuously adjusting discharge current.During discharge, when the terminal voltage of the battery or the voltage of the battery unit falls to the set lower limit or reach set discharge time, or reach set discharge capacity, the instrument will automatically stop discharging,and record all the valuable and continuous real-time data of the process.

This test instrument system uses wireless relay access to the voltage monitoring information of a single battery, which is simple, safe and accurate.

This instrument has a very friendly man-machine interface, not only can complete various settings and data query under the menu prompt, and the discharge process data are also stored in the memory of the device, and can be transferred to the U disk by data cable .And through the upper computer's special software to analyze the data, generate the required curve and report form.

Hot tags: battery charging - discharging test, battery discharge tester, battery charging discharging test

II. Main Features


1.PTC ceramic resistance is used,avoid phenomenon of red heat, make the whole discharge process more safe.

2. The single monitoring module adopts remote RADIO frequency wireless communication mode to transmit voltage data,and can set up up to 4 independent frequency bands.That is, up to four monitoring systems can be used to transmit data simultaneously in the same area,without interfering or channeling.

3.Wireless acquisition box can monitor each battery,to realize complete monitoring of battery discharge process, and it has three data acquisition methods:

A.Data transmission is carried out between single monitoring module and discharge instrument host.

B.Data transmission is carried out between single monitoring module and USB wireless terminal.

C.Data transmission is carried out between single monitoring module, discharge instrument host and USB wireless terminal

3. Each discharge device can monitor 25 individual collection boxes,each unit can be connected to 12 batteries,can monitor 300 batteries in total .The device can automatically screen the serial number and voltage value of the highest 6 batteries and the lowest 6 batteries and display them in different colors on the display screen.

5.Single voltage value has sliding table display and sliding bar chart display,

there are two ways to view the data.

6.Equipped with PC computer software, can record the total voltage, discharge current and each single battery voltage data and analyze it . And it can generate the corresponding data report form.Directly reflect the battery performance curve, graph, report, etc., and can be printed, query.

7.With USB interface, which can store the data of the discharge process into a U disk, and then transfer data into PC. PC data management software can analyze the process of battery discharge, and generate the corresponding data report ,

Make data transfer and storage more convenient.

8. Intelligent single-chip microcomputer ARM control, 7-inch 1024*600 high-definition LCD display, capacitive touch operation.

9. Automatic protection stop function, over-temperature protection, over-voltage protection, over-current protection, reverse receiving protection, when any alarm stop, the display screen can display the corresponding alarm prompt, and automatically disconnect the air circuit breaker.

10.Discharge/charge termination conditions can be set,including single battery low voltage, whole battery low voltage/high voltage, small charging current, charging/discharging time to, charging/discharging capacity,When either condition is met, the device will automatically stop the test with a beeping beep,at the same time, the reason for stopping is automatically recorded.


details


III.Technical Parameter


Battery

DC110V

Discharge voltage

DC 88V-132V

Discharge current

0-30A

Working mode

Stand-alone mode, parallel host mode, parallel slave mode, remote controlled mode

Protection performance

Overvoltage protection, undervoltage stop, overcurrent protection, reverse connection protection,

65℃ overtemperature protection, with LCD prompt, buzzer alarm

Single battery voltage acquisition(Optional)

Multi-band RADIO frequency wireless module, communication range up to more than 100 meters,compatible with 2V/4V/6V/12V single battery voltage monitoring,1~25 groups radio frequency wireless monitoring module,up to 300 batteries can be monitored.A single wireless monitoring module can monitor 12 single batteries

Control accuracy

Discharge current≤±1%;
terminal voltage≤±0.1%;single cell battery voltage :≤±0.05%

PC communication

RS485 interface,USB interface

Data storage capacity

· Built in SD card , 8G capacity ,transfer U disk 16G capacity

Working Environment


Heat sinks

forced cooling

Temperature

Working range:-5~50℃ storage temperature:-40~70℃

Humidity

Relative humidity 0~90%(40±2℃)

Altitude

Rated altitude 4000m

Noise

﹤75dB

Power supply


Voltage

Power supply:single phase AC220V (–20%~+30%),frequency :45~65Hz;

Charge power supply:refer to nameplate or case ID

Withstand Voltage test

Input-shell:2200Vdc 1min

Input-Output:2200Vdc 1min

Output-shell:700Vdc 1min

Safety

Meet EN610950

Wiring


AC input

International public socket,suitable for 1 ~ 1.5mm2 cable

Discharge current line

Cable quick plug(red is positive and black is negative),

please refer to the "Shipping list" for the specific size.

Parallel(optional)

6 core crystal plug wire, 2m length


IV. F. A. Q


1. Can you provide the training for us?

Yes, we can provide free training for our client at our factory.

If you require the training on-site, we also can arrange accordingly.

We have 10 seasoned engineers who become our technical team, they flied many countries for client’s installation and commissioning!

3. What’s the warranty period ?

Our warranty period is one year .

The product can be replaced within 1 month, can be repaired for free charge for one year and maintenance for lifetime.

What is more, our warranty can be extended only charged small warranty fee

9. Can you afford calibration certificate ?

Yes , we can afford calibration certificate issued by third authoritative institution .

-1


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend