Membership
Help
Poocca Hydraulic (Shenzhen) Co., Ltd.
Poocca Hydraulic (Shenzhen) Co., Ltd.
Bent shaft fixed piston pump A2FO


PAA2FO fixed displacement pump of axial piston, bent axis design is made suitable for hydrostatic drives in open circuits. Suitable for use in or industrial applications.
Name | A2FO series bent axis variable piston pump |
Series | Series 61 and 63 60 |
Sizes | 5 10 12 16 23 28 32 45 56 63 80 90 107 125 160 180 200 250 355 500 710 1000 |
5 Nominal pressure/Maximum pressure | 315/350 bar |
10 to 200 Nominal pressure/Maximum pressure | 400/450 bar |
250 to 1000 Nominal pressure/Maximum pressure | 350/400 bar |
Operation Mode | Open circuit |

Size | NG | 5 | 10 | 12 | 16 | 23 | 28 | 32 | 45 | 56 | 63 | 80 | ||
Displacement geometric, per revolution | Vg | cm3 | 4.93 | 10.3 | 12 | 16 | 22.9 | 28.1 | 32 | 45.6 | 56.1 | 63 | 80.4 | |
Speed maximum1) | nnom | rpm | 5600 | 3150 | 3150 | 3150 | 2500 | 2500 | 2500 | 2240 | 2000 | 2000 | 1800 | |
n 2) | rpm | 8000 | 6000 | 6000 | 6000 | 4750 | 4750 | 4750 | 4250 | 3750 | 3750 | 3350 | ||
max | ||||||||||||||
Flow at nnom | qV | L/min | 27.6 | 32 | 38 | 50 | 57 | 70 | 80 | 102 | 112 | 126 | 145 | |
Power at | Dp = 350 bar | P | kW | 14.5 | 19 | 22 | 29 | 33 | 41 | 47 | 60 | 65 | 74 | 84 |
Dp = 400 bar | P | kW | – | 22 | 25 | 34 | 38 | 47 | 53 | 68 | 75 | 84 | 96 | |
Torque3) | Dp = 350 bar | T | Nm | 24.74) | 57 | 67 | 89 | 128 | 157 | 178 | 254 | 313 | 351 | 448 |
at Vg and | Dp = 400 bar | T | Nm | – | 66 | 76 | 102 | 146 | 179 | 204 | 290 | 357 | 401 | 512 |
Rotary stiffness | c | kNm/rad | 0.63 | 0.92 | 1.25 | 1.59 | 2.56 | 2.93 | 3.12 | 4.18 | 5.94 | 6.25 | 8.73 | |
Moment of inertia for rotary group | JGR | kgm2 | 0.00006 0.0004 | 0.0004 | 0.0004 | 0.0012 | 0.0012 | 0.0012 | 0.0024 | 0.0042 | 0.0042 | 0.0072 | ||
Maximum angular acceleration | a | rad/s2 | 5000 | 5000 | 5000 | 5000 | 6500 | 6500 | 6500 | 14600 | 7500 | 7500 | 6000 | |
Case volume | V | L | 0.17 | 0.17 | 0.17 | 0.2 | 0.2 | 0.2 | 0.33 | 0.45 | 0.45 | 0.55 | ||
Mass (approx.) | m | kg | 2.5 | 6 | 6 | 6 | 9.5 | 9.5 | 9.5 | 13.5 | 18 | 18 | 23 | |
| Size | NG | 90 | 107 | 125 | 160 | 180 | 200 | 250 | 355 | 500 | 710 | 1000 | ||
Displacement geometric, per revolution | Vg | cm3 | 90 | 106.7 | 125 | 160.4 | 180 | 200 | 250 | 355 | 500 | 710 | 1000 | |
Speed maximum1) | nnom | rpm | 1800 | 1600 | 1600 | 1450 | 1450 | 1550 | 1500 | 1320 | 1200 | 1200 | 950 | |
n 2) | rpm | 3350 | 3000 | 3000 | 2650 | 2650 | 2750 | 1800 | 1600 | 1500 | 1500 | 1200 | ||
max | ||||||||||||||
Flow at nnom | qV | L/min | 162 | 171 | 200 | 233 | 261 | 310 | 375 | 469 | 600 | 852 | 950 | |
Power at | Dp = 350 bar | P | kW | 95 | 100 | 117 | 136 | 152 | 181 | 219 | 273 | 350 | 497 | 554 |
Dp = 400 bar | P | kW | 108 | 114 | 133 | 155 | 174 | 207 | – | – | – | – | – | |
Torque3) | Dp = 350 bar | T | Nm | 501 | 594 | 696 | 893 | 1003 | 1114 | 1393 | 1978 | 2785 | 3955 | 5570 |
at Vg and | Dp = 400 bar | T | Nm | 573 | 679 | 796 | 1021 | 1146 | 1273 | – | – | – | – | – |
Rotary stiffness | c | kNm/rad | 9.14 | 11.2 | 11.9 | 17.4 | 18.2 | 57.3 | 73.1 | 96.1 | 144 | 270 | 324 | |
Moment of inertia for rotary group | JGR | kgm2 | 0.0072 | 0.0116 | 0.0116 | 0.022 | 0.022 | 0.0353 | 0.061 | 0.102 | 0,178 | 0.55 | 0.55 | |
Maximum angular acceleration | a | rad/s2 | 6000 | 4500 | 4500 | 3500 | 3500 | 11000 | 10000 | 8300 | 5500 | 4300 | 4500 | |
Case volume | V | L | 0.55 | 0.8 | 0.8 | 1.1 | 1.1 | 2.7 | 2.5 | 3.5 | 4.2 | 8 | 8 | |
Mass (approx.) | m | kg | 23 | 32 | 32 | 45 | 45 | 66 | 73 | 110 | 155 | 325 | 336 | |

Output flow is proportional to drive speed and displacement. The drive shaft bearings are designed to give the service life expected in these areas of operation.

Careful selection of the displacements offered, permit sizes to be matched to practically every application.

Favorable power / weight ratio. Compact and economical design. Optimum efficiency. One piece pistons with piston rings.

--Hydraulic Power Units
--Industrial machineries
--Drilling machinery
--Mining Machinery
--Forestry equipment
--Construction machinery
--Hydraulic system
--Excavator
--Injection molding machine

Customer's Comments
We have pre-sale service,in-sale service and after-sale serice,What we pursue is long-term cooperation,so our principle is cutomer first. 24hours online.
Warranty :12months.