Welcome Customer !

Membership

XwbooGeneral Machinery Valve Gate ValveBi-directinal Pressure Knife Gate Valve
  • $item.Title
  • $item.Title

Bi-directinal Pressure Knife Gate Valve

Bundor Valve Technology co., Ltd.

Model
DN50-DN300
Nature of the Manufacturer
Manufacturer
Product Category
Gate Valve
Place of Origin
TianJin, TianJin
Bi-directinal Pressure Knife Gate Valve 【Size Range】: DN50-DN300 【Pressure】: PN10/16/150LB 【Body Materials】: WCB

ADVANTAGES

Knife gate valve is also known as knife gate valve, slurry valve, mud valve. Its opening and closing parts are gate. The movement direction of gate is perpendicular to the direction of the fluid. Depending on cutting fiber material blade shaped gate to cut off the medium. The gate board rises and falls in the side guide groove and is pressed on the seat by the bottom lug. If high medium sealing is needed, o-type sealing seat can be selected to achieve two-way sealing. Knife gate valves have small installation space, low working pressure, long service life, simple maintenance.

【Name】Bi-directinal Pressure Knife Gate Valve
【Working temperature】0~80℃
【Suitable medium】Water, mud, ash, slag and water mixture, etc
【Application】Coal mine, chemical industry, environmental protection, water treatment, water supply and drainage, etc

Product Advantages

1. Precision casting valve body, fine appearance, no sand hole, traceable with Heat number.

2. Valve wedge is burnished smoothly 3 times and polished 5 times to ensure the sealing porformance.

3. Valve stem is equipped with bearing to reduce friction, increased service life.

4. Add steel wire to seat ring to ensure the strong conbation between valve seat and body.

5. 250 μm epoxy coating, it can effectively prevent corrosion and rust. 

6. Each valve will be made pressure test before leaving factory.

PARAMETER INFORMATION

NameDesign and manufactureFace to face LengthEnd Flange 
Reference StandardJB/T 8691GB/T 12221GB/T 9113/ASME B16.5
 
Name1-Body2-Seat3-Wedge4-Stem5-Handwheel
MaterialWCB/304/316EPDM304/3162Cr13DI
 
Size PN10PN16150LB
DNNPS(Inch)LD1N-MZ-φCD1N-MZ-φCD1N-MZ-φC
50 2''481252-M162-φ181252-M162-φ18120.72-M162-19
65 2  1/2''481452-M162-φ181452-M162-φ18139.72-M162-19
80 3''511602-M166-φ181602-M166-φ18152.42-M162-19
100 4''511802-M166-φ181802-M166-φ18190.52-M166-19
125 5''572102-M166-φ182102-M166-φ18215.92-M206-22
150 6''572402-M206-φ222402-M206-φ22241.32-M206-22
200 8''702952-M206-φ222954-M208-φ22298.42-M206-22
250 10''703504-M208-φ223554-M248-φ26361.94-M228-25
300 12''764004-M208-φ224104-M248-φ26431.84-M228-25
350 14''764606-M2010-φ224706-M2410-φ26476.24-M278-29
400 16''895156-M2410-φ265256-M2710-φ30539.76-M2710-29
  Bundor Valve was established on August 5, 1994 with a registered capital of 102.3 million yuan. Factory is located in Tianjin city, China. As a professional manufacturer and supplier, Bundor mainly provides various types of butterfly valves, gate valves, check valves, globe valves, ball valves, balance valves, y-type strainers, rubber joints, flanges, pipe fittings etc. The products can comply with GB, ANSI, JIS, DIN, BS standard and are widely used in water treatment, HAVC, municipal engineering, water supply and drainage, petroleum, chemical and other industries.Bundor Valve factory has 216 sets of high precision equipment and 231 sets of product mould. It has set up a product testing laboratory, a material laboratory, a product life laboratory and has an independent research and development intelligent inspection center. At present, Bundor has passed TS A1, CE, 3C, ISO9001, ISO14001, OHSAS18001 certificates and holds 102 patents for inventions and designs. What`s more, Bundor Valve is a state-level high and new technology enterprise, a leading enterprise in the past 40 years of reform and opening up, a model enterprise of AAA grade good reputation. In 2015, Bundor was invited to participate in the Expo Milano, Italy. In 2017, Bundor were invited to participate in the Astana Expo and won the Gold Award.Bundor brand products were exported to over 76 countries and regions which spread in North America, Europe, Southeast Asia, Central Asia, the Middle East, South America, Africa etc. Bundor has provided more than 3000 types of valve products and severed more than 1200 customers all over the world. On average, more than 8699 pieces of quality products are sold all over the world every day.Bundor series trademarks have been registered in more than 100 countries and regions, including China, the United States, Madrid member states, European Union member states and African intellectual property countries. Now Bundor is looking for global distributors and agents. Welcome to all forms cooperation!
Similar Product Recommend