Membership
Help
Dalian Refine Tech Co., Ltd.
Dalian Refine Tech Co., Ltd.
Standard design: in line with DIN24960 and GB6556 standards. It has strong versatility
Multi-spring: good compensation, uniform load on the end face
Overall hard end face: optimized end face design, small end face deformation
Setting screw positioning: simple installation, convenient adjustment
Limit Performance Parameters:
Shaft diameter: Metric 14~100mm
Temperature: - 30 ° C to 200 ° C
Pressure: 0~ 4.0mpa, avoid working under negative pressure and vacuum
Speed: 25 m/S or less (5000 RPM) or less

Selection Of Sealing Materials:
C89 series seals can use different friction pairs and auxiliary sealing materials according to different working conditions. In order to ensure reliable operation under the premise of structure, the application of C89 series sealing materials has been specified. The following table is the recommended materials.
DESCRIBE | MATERIAL | C89U | C89B | C89UV | C89BV |
End Surface | tungsten carbide | ○ | ○ | ○ | ○ |
silicon carbide | ● | ● | ● | ● | |
Spring | chrome-nickel steel | ● | ○ | ● | ○ |
Nickel chrome molybdenum steel | ○ | ● | ○ | ● | |
Auxiliary seal | Nitrile Rubber | ● | ○ | ||
FKM | ○ | ● | |||
EPR | ○ | ||||
PTFE coated fluoroadhesive | ● | ● | |||
PTFE | ● | ● | |||
Perfluorinated rubber | ○ | ○ | |||
Other | chrome-nickel steel | ● | ○ | ● | ○ |
Nickel chrome molybdenum steel | ○ | ● | ○ | ● |
1. ● For the priority to use materials
2.○ To allow the use of materials, can be determined according to the actual requirements
3. You can provide the materials not provided in the table to meet the more special requirements, if necessary, please contact your company

C89B MECHANICAL SEAL
C89BV MECHANICAL SEAL
C89UV MECHANICAL SEAL
C89U MECHANICAL SEAL