Membership
Help
Shenzhen Jiwei Automations Ltd.
Shenzhen Jiwei Automations Ltd.
Cape-11AStandard RF Admittance Level Switch can measure capacitance as well asimpedance between probe and vessel. It is suitable for dust and coal ashes levelmeasurement. The probe is not susceptible to material buildup. It is flexiblefor various applications. Cape-11A is with modular design, easy forinstallation and maintenance. External LED light is ideal for long distanceobservation.
In Cape-11 RFAdmittance Level Switch series products, a probe is designed to detect thechange of capacitance and impedance between probe and vessel wall to fulfillmaterial level measurement and control. In its electronic unit, reactance between measurement electrode and thewall of an empty vessel constitute a balanced bridge circuit whichoutputs a stable oscillation signal. As medium level rises, measured mediumcovers measurement electrode, reactance between electrode and the wall ofvessel changes. It causes imbalance of bridge circuit and stops the oscillationas a result. A post-circuit is designed to detect the change of output signalfrom bridge circuit and generate an alarm signal. In addition, oscillation signal at radio frequency is not only applied to themeasurement electrode but also applied to a shield pole through a 1: 1voltage-follower, so measurement electrode and shield pole have the sameelectric potential, phase, and frequency, but these two electrodes areinsulated from each other. Even if there is medium buildup on probe, becausethere is no electric potential difference between measurement electrode andshield pole, and the reactance change on shield pole has no effect on thedetection of post-circuit. Therefore, only reactance change on measurementelectrode induced by the filled medium between measurement electrode and thewall of vessel will be detected by post-circuit. It eliminates the effect ofmedium buildup on level measurement.
● Inexpensive with super quality, high cost-effective ratio.
Medium | Medium Type | Solid granules and adhesive materials |
Dielectric constant | ≥1.6 | |
Probe data | Probe length | 250~2000mm |
Shield length | 90mm/240mm/300mm /590mm , can also be customized | |
Diameter | φ8mm/φ10mm | |
Materials | External housing | Aluminum alloy |
Inner housing | Plastic | |
Probe metallic parts | SUS304, 316L | |
Probe insulation parts | PTFE | |
Power supply | AC | 85~264V AC |
DC | 18~30V DC | |
Power consumption | ≤3W | |
Switch delay | When immersed | 1s |
When laid bare | 1s | |
Signal output | Relay | DPDT, 8A/250V AC/30V DC |
Relay Delay | 0~30s continuous adjustable | |
Operating conditions | Process temperature | -40~250℃ |
Ambient temperature | -40~70℃ | |
Storage and transport temperature | -40~80℃ | |
Approvals | Protection rating | IP66 |
● Electrostaticprecipitator bag, ash hopper and conveying pump in ash transport system atpower plant.
● Coalash bunker in coal ash collecting device at power plant.
● Sootbin and silo in flue gas desulfurization apparatus at power plant.
● Limestonesilo in a sintering desulfurization apparatus.