Membership
Help
JAYE HEATER TECHNOLOGY
JAYE HEATER TECHNOLOGY
The ceramic insulated finned strip heaters made by Jaye Heater Technology filled with a highly compressed MgO insulator that conducts heat from the nichrome wire to the outer sheath. Fins help to maximize surface contact separation, which dissipates heat and then transfers it to the air more quickly.

Ceramic insulated finned strip heaters (usually considered as component heater), which can maximize the heat intensity and effectively transfer heat in a specific area. They also can be easily controlled by using the heating control panel, mechanical thermostat or cost-effective bimetal thermostat. These temperature regulators can be installed on the surface of the heater. The mounting hole can be used to firmly mount the heater on the wall frame, and the terminal extends from the sheath to facilitate the electrical connection. If you need the wire to extend from one end are also available by Jaye, to makes the installation more flexible because the temperature controller can easily adapt to this configuration.
Specifications:
Item name | Ceramic Insulated Finned Channel Strip Heater |
Resistance heating wire | Ni-Cr or FeCr |
Sheath | Stainless steel 304,321,316, Incoloy 800, Incoloy 840, Ti |
Insulation | Ceramic, Mgo Powder |
Maximum temperature | 600 degree Celsius |
Voltages available | 380V,240V, 220V,110V, or 120V |
Power | Custom made |
Lead wire | 300mm length standard or customized; Different type of wire is available |

Application:
*Mold heating
*Autoclave
*Thermoforming
*Resistance load Library
*Food warming
*Antifreeze and moistureproof
*Tank and platen heating
*Packaging
*Oven


