Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
chilled water electromagnetic flow meter for boiler
Application of electromagnetic flowmeter in the measurement of chilled water flow: electromagnetic flowmeter has obvious advantages in the measurement of chilled water flow. For example: no pressure loss, high precision, good stability. Electromagnetic flowmeter is characterized by no movable parts, high reliability, good sealing performance, and can also be used in tap water and underground water system.


Measure Medium | Water,Sewage,Acid,Alkali,Slurry,Milk | |||
Nominal diameter | 15-500mm | |||
Degree of accuracy | ±0.5%R | |||
Medium conductivity | ≥5uS/cm,Actual conductivity≥30uS/cm | |||
Nominal pressure | 1.0MPa | 1.6MPa | 2.5MPa | 4.0MPa |
DN15-DN500 | DN15-DN500 | DN15-DN500 | DN15-DN50 | |
Highest medium temperature | Compact type | +80℃ | ||
Remote type | CR chloroprene rubber liner (CR) | +80℃ | ||
Polytetrafluoroethylene lining(F4) | +120℃ | |||
Politef lining(F46) | +120℃ | |||
Teflon(PFA) | +180℃ | |||
Fluorosilicone rubber(FVMQ) | +250℃ | |||
Output signal | 4-20mA;Pulse/Frequency 2kHz(Default),5KHz(Max) | |||
Supply voltage | 110/220VAC(100-240VAC),50Hz/60Hz;24VDC ±10% | |||
Communication | RS-485,Support standard Modbus-RTU protocol;GPRS | |||
Electrode material | Stainless steel 316L,Hastelloy C,Hastelloy B,titanium, tantalum, platinum | |||
Level of protection | Remote type | IP68,IP65 | ||
Compact type | IP65 | |||
Because of the characteristics of chilled water, some problems should be paid attention to in the use of chilled water electromagnetic flow meter for boiler.
First of all, the internal problem of electromagnetic flowmeter, pay attention to the negative pressure of memory. When the measuring medium has certain corrosiveness, we need to use polytetrafluoroethylene memory material. But the electromagnetic flowmeter made of tetrafluoroethylene can not bear negative pressure.
There are two ways to solve the problem:
First, using the memory with framework, the disadvantage is to increase the investment cost.
Second, the original vent valve is changed into a one-way valve (check valve). When there is a small negative pressure in the pipeline, the check valve will automatically open to draw air from the atmosphere, so as to ensure safety.




chilled water electromagnetic flow meter for boiler