Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberXenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test ChamberCircuit Breaker Resistance Test
  • $item.Title
  • $item.Title

Circuit Breaker Resistance Test

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Xenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test Chamber
Place of Origin
HuBei, WuHan
Testing range:1-3000.0μΩMinimum resolution :0.01μΩAccuracy :0.5%±0.5μΩConsumed power :≤3000W

Ⅰ、Summary



The good or bad of conductivity of breaker(hereinafter referred to as switch) conductive circuit, play an important role in guarantee the safety operation of switch. The conductivity performance can be reflected by the value of conductive circuit resistance. For this reason IEC standard and manufacturers all required testing the circuit resistance, and also have prescribed index for the circuit resistance of each kind switch. Before, normally use double bridge. But, because the voltage and current value are very small, when there are impurities between dynamic and static contact or the contact got surface oxidation, the dispersivity of test data is larger. At the same time, the anti-interference performance of bridge is not good, so the national standard requires that must test with DC more than 100A. The circuit resistance tester is a product developed by our company which in order to meet GB50150-2006 and DL/T 845.4-2004 regulations, and it was widely used in measurements of various switch’s contact resistance、circuit resistance, cable and wire、weld joint contact resistance.

Ⅱ、Safety precautions



1、Operator must have common sense to operate electrical equipment or instrument.

2、Please read operating manual carefully before use this instrument.

3、The adjustment and maintenance of the instrument must be done by specialized persons, don’t fix by yourself.

4、The instrument should avoid strenuous vibration, avoid heat and direct sunlight.

5、This instrument was designed to test purely resistive circuits, can not use to test inductive circuits.

6、Can’t dismantle test wire during test.

7、The grounding wire must connect correctly.

Ⅲ、Performance features



1、The test current value is big, completely conform the national standard requirement which related to contact resistance test.

2、The test current was came from the 500A/600A high precision switch type constant current power supply, without manual adjust, the test is rapid and accurate.

3、Adopt four terminal connections; effectively eliminate the influence to the test result from resistance of test wire.

4、Test speed is fast, the USB interface can connect with PC, upload test data.

5、Working long hours, equipped with overheat protection circuit; the instrument is reliable and steady.

6、Easy and simple operation, light weight.


Ⅳ、Technical specification:


1、 Test Current :

Model

Test Current

300A

100A、200A、400A、500A

400A

100A、200A、400A、600A

2、 Testing range:

Model

Test Current

Testing Range

500A

100A

1-3000.0μΩ

200A
400A
500A

600A

100A

200A
400A
600A

3、Minimum resolution :0.01μΩ

4、Accuracy :0.5%±0.5μΩ

5、Power supply :AC220V±10% 50Hz

6、Consumed power :

Model

Power

500A

≤2500W

600A

≤3000W

7、Operating temperature :-20℃~40℃

9、Relative humidity :≤80%RH, non-condensate


details-

Appendix 1:Contact resistance basic knowledge

1、What is contact resistance?

Contact resistance is the additional resistance when the static contact touch dynamic contact.

2、Breaker contact resistance was made up of which part?

Was made up of contract resistance and surface resistance of dynamic、static contact area.

3、Unqualified reasons of breaker contact resistance?

— Contact burn out when switch big short circuit current.

— When the construction adjust not good or fixed not securely, cause change stroke, when over stroke was badly unqualified, cause contact pressure and contact area changed.

— After adjustment and installation of breaker, not operate for a long time, cause dynamic、static contact got surface oxidation, contact area resistance increase.

— Long-time working cause spring deformation, decrease the contact pressure.

—Mechanical wear of mechanical part after long-time working.

—For low-oil breaker, also can be the reason of unqualified acid value of insulating oil, when it appear acid and corrode the surface. Or because of the floating impurities in oil, and tiny carbon、metal dust between dynamic、static contact caused by switch short circuit current, can increase the contact resistance.

4、The factors influencing resistance.

—Material property: hardness、chemical property、mechanical strength and electrical resistivity of metallic compound.

—Contact mode: point contact、line contact、surface contact.

—Contact surface situation: when the contact surface form oxidation film(except silver),the resistance of oxidation film is much bigger than the metal.

—Contact pressure.

—Roughness of contact surface.

After-sales service

1. Our company gives one year warranty for sold product. If user wants maintenance please contact our after-sales department.

2. During warranty period if happen any following situation, we will charge a cost price for maintenance:

1) Failure or damage caused by clash during user using or moving the product.

2) The product was not kept properly by user, cause instrument ooze water、affected with damp、clash or light fire and so on.

3) Failure or damage caused by maintenance from user or other entrusted unit by user.

4) Failure or damage caused by wrong connection from user.

5) Failure or damage caused by force majeure(like fire disaster、flood disaster、natural disaster and so on)

6) Failure or damage caused by connect to other equipment not according to this manual.

7) Faulty product has no warranty card and unable to determine it is within warranty period.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend