Membership
Help
Hangzhou Chenlong Intelligence Technology Co., Ltd.
Hangzhou Chenlong Intelligence Technology Co., Ltd.
| MODEL | CL-100NC | |||
| Cutting Capacity | Bar | ● | Ø20~100 mm | Ø7/9"~3 15/16" |
| Angle Material | ■ | 20~76 mm | 7/9"~3" | |
| Round Tube | ○ | Ø20~100 mm | Ø7/9"~3 15/16" | |
| Square Tube | □ | 20~76 mm | 7/9"~3" | |
| Head Spindle | Use TCT Superhard Circular Saw Blade | φ360 mm, T2.6 mm | ||
| Pin Hole and Aperture | 4xØ11xPCD90xØ40 | |||
| Spindle Motor | 11 kW | |||
| Spindle Speed | 20~120 rpm | |||
| Cut Feed Mode | AC Servo Motor+Ball Screw /Swing Feed | |||
| Main Clamp Way | Hydraulic Type/Vertical and Horizontal Clamping of Each Group | |||
| Saw Blade Debris Removal Device | Passive Round Wire Brush/Active Round Wire Brush(Optional) | |||
| Gear Gap Compensation Device | Through-type Magnetic Power Brake | |||
| Feeding Clamps | Feeding Drive Mode | AC Servo Motor+Ball Screw | ||
| Feeding Clamp Way | Hydraulic Clamped | |||
| The Material Front End Removes the Length | 10~99 (Optional) | |||
| Material Back-end Material Length | 75 mm+α(α is not enough to cut the length of a workpiece | |||
| Single Feed Cut Length | 10~680 mm | |||
| Automatic Feeding Device | Allow the Length of Material | 3000~6000 mm | ||
| Supply Mode | Preloading/Hydraulic Lifting | |||
| Hydraulic Device | Hydraulic Pump Type | Preloading/Hydraulic Lifting | ||
| Hydraulic Drive Motor | 2.25 Kw | |||
| Hydraulic System Rated Pressure | 7 MPa | |||
| Hydraulic Oil Capacity | 110 L | |||
| Cutting Fluid Cooling Device | Cutting Fluid Motor | 0.19 kW | ||
| Size and Weight | Weight(Machine+Rack) | 3000 kg | ||
| Size(LxW) | 6500x2450 mm | |||
Cutting stock to length all day, every day? With this high speed circular saw machine, you just input the number and length you want. The machine handles the rest!
Features
| 1. Saw Blade Deflection Shock Device | Tungsten Carbide Parallel Block | ||
| 2. Dispenser | Pneumatic/Reciprocating | ||
| 3. Automatic Centralized Grease Lubrication Syetem | Timely Quatitative Forced to the Oil | ||
| 4. Tool Micro-lubrication System | Quasi-dry Intermittent Oil | ||
| 5. Chip Conveyor | Chain Plate Type/Continuous or Intermittent Operation | ||
| 6. Work Lamp | LED/Waterproof and Dustproof |