Welcome Customer !

Membership

XwbooGeneral Machinery Valve Gate ValveClamp high-pressure flat gate valve
  • $item.Title
  • $item.Title

Clamp high-pressure flat gate valve

Shanghai Hufa Fluid Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Gate Valve
Place of Origin
ShangHai, ShangHai
Model: ZF83Y Nominal diameter: DN25 ~ 200mm, NPS 1 " ~ 8" Nominal pressure: PN15 ~ 450MPa, Class900 ~ 2500Lb Connection: flange, welding, clamps The sealing properties: H- alloy, F- enhanced polytetrafluoroethylene, Y- carbide Operation: manual, bevel gear transmission, electric

Z83Y-160, ZF83Y high-pressure clamp gate valve product introduction

This series of products adopt the new balanced floating seal structure, which is suitable for the opening, closing and adjusting devices of the controlling medium on the oil, gas and other pipelines whose pressure is not more than 40MPa and the temperature is not higher than 120 ℃. The product structure is novel in design and material selection Proper, measured strictly, light operation, with strong anti-corrosion, wear resistance, erosion resistance, is the oil industry an ideal new equipment.


 Z83Y-160, ZF83Y high-pressure clamp gate valve structural features and working principle

1, the use of floating seat, two-way opening and closing, reliable sealing, opening and closing flexible.

2, the lower part of the gate open diversion hole, and to give precise guidance, while the seal are sprayed

Carbide welding, erosion-resistant.

3, the body carrying capacity is high, the channel is straight-through, fully open, and the gate diversion hole

Similar phase-through and straight pipe, flow resistance is small. Stem composite filler, multiple seals, making the seal reliable, small friction.

4, closing the valve, turn the hand wheel clockwise, the gate moved to the bottom, due to referral

The role of quality pressure, the inlet seal seat to the gate direction. A larger seal than the pressure, thus forming the first seal. At the same time, the gate pressure to the outlet seal seat, a double seal.

5, due to the double seal, it can be in the pipeline does not affect the work even more

For wearing parts. This is our factory product priority over similar products at home and abroad an important feature.

6, open the gate, turn the hand wheel counterclockwise, the gate up, diversion holes and channels

Hole through. With the rise of the gate, the through hole gradually increases to the limit position, the guide hole coincides with the passage hole, then fully open.


 Z83Y-160, ZF83Y high pressure clamp gate valve performance specifications

Pressure Level

16

20

25

32

35

40

Working pressure (Mpa)

≤16

≤20

≤25

≤32

≤35

≤40

Strength test (Mpa)

24

30

37.5

48

52.5

60

Seal test (Mpa)

17.6

22

27.5

35.2

38.5

44


medium

Water, oil, natural gas

temperature

-19 to 120 ° C


Z83Y-160, ZF83Y high-pressure clamp gate valve shape and connection dimensions

Nominal pressure (MPa)

Nominal diameter (mm)

Size (mm)

D

G

C

L

E

H

W

L0

16

20

40

36

43

64

210

82

356

240

430

50

46

52

70

242

100

379

260

460

65

58

63

89

260

125

402

280

500

80

72

78

108

310

157

475

320

550

100

90

95

130

450

183

548

350

610

150

135

150

195

550

262

660

450

750

25

40

36

43

64

210

82

356

240

430

50

46

56

76

310

120

379

260

460

65

53

67

89

340

132

402

280

500

80

65

86

114

380

157

475

320

550

100

80

101

133

450

183

548

350

610

150

130

167

219

620

272

793

450

750

35

40

36

43

64

210

82

356

240

430

50

46

56

76

300

123

379

260

460

65

53

67

89

340

136

402

280

500

80

65

86

114

380

162

475

320

550

100

80

101

133

450

188

548

350

610

150

130

167

219

620

278

793

450

750

 

Z83Y-160, ZF83Y high-pressure clamp gate use, maintenance, care and precautions

1, the valve has been made before the factory strength and seal test, all connections should be used to maintain the initial state.

2, this series of valve operation handwheel marked with the opening and closing rotation signs, the upper rod with open and close the height of the rod, for the regulation instructions.

3, the valve and pipe welding, the valve should be opened, the proper use of wet material to protect the neck, minimize heat conduction, to prevent damage to packing parts.

4, closed the valve is forbidden to use the force lever, the gate closed to the top of the hand wheel should be rotated ½ turn so that the gate in a floating state.

5, the valve during use, should be regularly injected into the bonnet grease fittings quantitative grease.

6, the valve in use, as a result of wearing parts and leakage, should be promptly replaced.

7, the valve in the overhaul process, should clean the cavity, the assembly should be the transmission parts plus grease.

8, the valve storage is disabled, the gate should be closed, long-term storage should be placed in a ventilated and dry place, regular inspection and maintenance.


  Hufa Holding Co., Ltd. Is a well-known manufacturer and supplier of common valves such as emergency cut-off valve, pressure reducing valve, regulating valve, chemical valve, water control valve and electric two-way valve.Mainly used in petroleum, chemical, steel, metallurgy, building materials, light industry, electricity, environmental protection, food and other industries, products throughout the country and are used in many national key projects, but also exported to Asia, Europe and other regions.Main products include: solenoid valve, regulating valve, chemical valve, water control valve, electric two-way valve, general valve;6 main products for a variety of industrial needs to provide a full range of fluid control solutions.Hufa Holding Co., Ltd. strives to build a well-known high-end control valve manufacturing enterprises, national high-tech enterprises, specializing in high-end control valve scientific research design, manufacturing and sales, technical exchanges, import and export trade in one of the international entity enterprise headquarters is located in zhejiang, the pump and valve capital of China.The company was founded in July 2004, Shanghai branch production base is located in Shanghai, construction area 1250 square meters, and has the domestic leading production equipment and multi-functional, intelligent valve inspection system and test center.Companies adhere to the advanced equipment localization and technical independent innovation, the pursuit of do the best employees, do the best products and the best enterprise goal, strive to build the company into a domestic first-class, the world level of control valve supplier, for the continuous development of automation industry to make greater contribution!Today's Shanghai valve brand has formed a technical system with independent intellectual property rights as the core, relying on science and technology for innovation;Set up r&d center, used in technical improvement, innovation and development of new products, and the introduction of the United States, Germany, Japan and other advanced level of technology and products, through the absorption and reference to manufacturing technology, perfect products, form with independent core high-end products, reduce the distance with the world's advanced products, in the domestic and international market to get customers' trust and respect.Related products have won many honors such as Shanghai high-tech achievements transformation, and won the high-tech enterprise in 2011.At the same time, the company is the first in the domestic industry through TS(pressure pipe components manufacturing license), explosion-proof electrical production license, ISO9001 (international quality management system), CE (European Union safety mark) and other quality systems and special industry requirements certification system. Hufa products are distributed throughout the country and applied in many national key projects, mainly used in petrochemical industry, aerospace, national defense, hvac, electric power equipment, biopharmaceutical, medical equipment, food machinery, environmental protection water treatment and other industries;Ju liang company and Shanghai baosteel, navy logistics, China petroleum group, tongfang shares, hangzhou holishi, kweichow maotai distillery, China nuclear power, the 12th national games of the main torch Taiwan and many other well-known enterprises and key projects to establish a good relationship of cooperation.Business philosophy of Shanghai Valve:Persist in not forgetting the original intention, continue to move forward; while pursuing the material and spiritual happiness of all Shanghai Valve partners, go all out to make perfect products and contribute to social progress.Company purposeTechnological innovation, quality assurance, honesty, efficiency and considerate serviceCorporate objectivesEstablish an international first-class control valve of Chinese enterprises.Company value
Similar Product Recommend