Membership
Help
JAINNHER MACHINE CO., LTD.
JAINNHER MACHINE CO., LTD.
Tailstock
Wheel head

Headstock
Revolution Tailstock (option)

CNC-controller

CVC Curve
Combined Curve

Sine Curve
| ITEM | MODLE | TYPE | ||||||||||||
| S40 | M60 | L85 | L100 | |||||||||||
| Working capacity | Max. sing over table | mm | Ø 400 | Ø 600 | Ø 850 | Ø 1000 | ||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| Max. distance between c.c. | M | 1.5M | 2M | 3M | 4M | 3M | 4M | 5M | 6M | 3M | 4M | 5M | 6M | |
| Max. weight of workpiece | kg | 1500 | 4000 | 6000 | ||||||||||
| Max. O.D. ground | mm | Ø 400 | Ø 600 | Ø 850 | Ø 1000 | |||||||||
| Rang of grinding dia. | mm | Ø5 ~ Ø400 | Ø15 ~ Ø600 | Ø20 ~ Ø850 | Ø20 ~ Ø1000 | |||||||||
| Wheelhead & Carriage (X axis) | Wheel size (O.D. x width x Bore) | mm | Ø500 x 50 x ø152 | Ø910 x Ø304.8 x 75 | ||||||||||
| Type of lubricating system | - | Hydrostatic & dynamic system | ||||||||||||
| Rotating speed of wheel | R.P.M | 300 ~ 1800 | 300 ~ 1200 | |||||||||||
| Max. cross feed rate | mm/min | 1000 mm/min | 2000 mm/min | |||||||||||
| Cross feed per pulse | mm/p | 0.001 mm | ||||||||||||
| Table (Z axis) | Travel of table or head (Z axis) | mm | Center Distance + 8" | |||||||||||
| Travel speed of table | mm/min | 25 ~ 3000 mm/min | 25 ~ 6000 mm/min | |||||||||||
| Type of lubricating systekm | - | Hydrostatic & dynamic system | ||||||||||||
| Workhead & tailstock | Rotation speed of work head | R.P.M | 10 ~ 100 | 8 ~ 80 | 6 ~ 60 | |||||||||
| Size of center | - | MT#5 | MT#6 | |||||||||||
| Moving speed of tailstock | mm/min | 手動 | ||||||||||||
| Stroke of quill | mm | 50 mm | 80 mm | |||||||||||
| Power rating | Grind wheel motor | HP | 15HP | 20HP | 30HP | |||||||||
| Workhead motor | HP | 5HP (3HPx6P) | 7.5HP (5HPx6P) | 10HP (7.5HPx6P) | ||||||||||
| Table traverse motor (Z axis) | HP | 12 NM | 22 NM | 30 NM | ||||||||||
| Tailstock move motor | HP | NON | ||||||||||||
| Cross feed motor (X axis) | HP | 8 NM | 12 NM | |||||||||||
| Lubricating system | HP | 2 HP | ||||||||||||
| Coolant system | - | 280 Liter | 360 Liter | 420 Liter | 420 Liter | |||||||||
| * All specifications are subject to change without notice. | ||||||||||||||
| ITEM | MODLE | TYPE | |||||
| H130 | H160 | H200 | |||||
| Working capacity | Max. sing over table | mm | Ø 1300 | Ø 1600 | Ø2000 | ||
|---|---|---|---|---|---|---|---|
| Max. distance between c.c. | M | 4, 5, 6, 7, 8 | 5, 6, 7, 8, 10, 12 | 6, 7, 8, 10, 12 | |||
| Max. weight of workpiece | kg | 15000 | 30000 | 40000 | |||
| Max. O.D. ground | mm | Ø 1300 | Ø 1600 | Ø2000 | |||
| Rang of grinding dia. | mm | 80 ~ 1300 | 180 ~ 1600 | 250 ~ 2000 | |||
| Max. dia of crown | mm | By porgram | |||||
| Wheelhead & Carriage (X axis) | Wheel size (O.D. x width x Bore) | mm | Ø910 x Ø304.8 x 80 | ||||
| Type of lubricating system | - | Hydrostatic & dynamic system | |||||
| Rotating speed of wheel | R.P.M | 300 ~ 1200 | |||||
| Max. cross feed rate | mm/min | 3000 mm/min | |||||
| Cross feed per pulse | mm/p | 0.001 mm | |||||
| Table (Z axis) | Travel of table or head (Z axis) | mm | Center Distance + 8" | ||||
| Travel speed of table | mm/min | 25 ~ 6000 mm/min | |||||
| Type of lubricating systekm | - | Hydrostatic & dynamic system | |||||
| Support | Roll neck diameter range | mm | 90 ~ 400 (350-600 option) | 90 ~ 400 (350-700 option) | |||
| Workhead & Tailstock | Rotation speed of work head | R.P.M | 6 ~ 50 | 3 ~ 30 | |||
| Size of center | - | PT#100 | |||||
| Moving speed of tailstock | mm/min | 2000 | |||||
| Stroke of quill | mm | 200 mm | |||||
| Power rating | Grind wheel motor | HP | 50HP (40HPx6P) | 75HP (60HPx6P) | |||
| Workhead motor | HP | 40HP (30HPx6P) | 50HP (40HPx6P) | 75HP (60HPx6P) | |||
| Table traverse motor (Z axis) | HP | 22 NM | 30 NM | 30 NM | |||
| Tailstock move motor | HP | 1HP x 6P | |||||
| Cross feed motor (X axis) | HP | 12 NM | |||||
| Lubricating system | HP | 2 HP | |||||
| Coolant system | - | 2000 Liter x 2HP | |||||
| * All specifications are subject to change without notice. | |||||||
| 1. | Grinding Wheel | pcs | 1 |
|---|---|---|---|
| 2. | Flange | Set | 2 |
| 3. | Dresser | Set | 1 |
| 4. | Flange puller | Set | 1 |
| 5. | Gage | Set | 1 |
| 6. | Splash Guard | Set | 1 |
| 7. | Filter | Set | 1 |
| 8. | Center | Set | 1 |
| 9. | Tool Box | Set | 1 |
| 10. | Support | Set | 2 |
| 11. | Sheet-Metal Covers | Pcs | 1 |
| 12. | Static balance device and arbor | Set | 1 |

Filter

Flange & balance device and arbor

Im_Process system
| 1. | Heavy duty support | Pcs |
|---|---|---|
| 2. | Center grinding device | Pcs |
| 3. | Carrier | Pcs |
| 4. | Universal joint | Pcs |
| 5. | 4-Jaws chuck | Pcs |
| 6. | Live center | Set |
| 7. | Spare flange | Set |
| 8. | Spare grinding wheel | Set |
| 9. | Rotating spindle type tailstock | Set |
| 10. | Portable Balancer | Pcs |
| 11. | Auto balancing system | Set |
| 12. | Roll caliper | Set |
| 13 | Dust collector | Set |
| 14 | Linear Encoder | Pcs |
| 15 | Special curve grinding program | Set |

Roll caliper

on-line balanced system

Universal joint

Heavyduty neck rest

Neck rest

Center grinding Device