Welcome Customer !

Membership

XwbooGeneral Machinery Valve Other ValvesConfluence shunt temperature control valve
  • $item.Title
  • $item.Title

Confluence shunt temperature control valve

Shanghai Hufa Fluid Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Valves
Place of Origin
ShangHai, ShangHai
Model: ZAZQ, ZAZX typeNominal diameter: DN25~ 200mmNominal pressure: PN1.0~6.4MPaTemperature: -60 ℃ ~ 450 ℃Main material: HT200, ZG230 ~ 450 ZG1Cr18Ni9Tiflange standard: Cast iron flanges Press GB4216.5-84 steel flange by GB9113-88, JB / T79-94

Product description

ZAZQ, ZAZX electric three-way joint flow diversion valve with cylindrical thin-walled window-shaped spool-oriented. Equipped with DKZ straight stroke electric actuator, to accept 0 ~ 10 or 4 ~ 20mA.DC signal to drive the valve opening and closing. Among them, the three-way confluence regulating valve is used for mixing the two fluids into a third fluid or the same fluid with different temperatures and mixing them into the same temperature fluid. A three-way diverter divides a fluid into two fluids. 
       This series of products from 25mm diameter to 200mm, the nominal pressure of 1.0,1.6,4.0,6.4 MPa, the temperature range -60 ℃ to 450 ℃, the control signal is 0 ~ 10 or 4 ~ 20mA.DC. Equipped with different implementing agencies can be divided into two types of ordinary and electronic.

Features

1, the direction of the fluid on the role of the spool are in a flow state, so the work of good stability. 
2, In addition to the valve cover bushing at the guide, the spool side and the valve seat inner surface also has the role of guide, guide the area, reliable work. 
3, the servo amplifier uses deep dynamic negative feedback, can improve the regulation accuracy. 
4, electric operator has many forms, applicable to 4 ~ 20mA.DC or 0 ~ 10mA.DC. 
5, electronic electric control valve can be directly controlled by the current signal valve opening, without servo amplifier. 
6, save automation investment, and single-seat, two-seater or sleeve valve compared to form the same system can save a valve to simplify the system and save investment. 
7, the bellows seal on the movement of the valve stem to form a complete seal, blocking fluid leakage.

Part Information:

Body, bonnet: HT200, ZG230 ~ 450 ZG1Cr18Ni9Ti 
Spool, seat: 1Cr18Ni9Ti Stellite alloy surfacing 
Filler: Teflon 
putter, bushing: 2Cr13

Technical Parameters:

Nominal diameter DN (mm)

25

32

40

50

65

80

100

125

150

200

Rated flow coefficient KV

confluence

8.5

13

21

34

53

85

135

210

340

535

Shunt

85

135

210

340

535

Rated travel (mm)

16

25

40

60

Flow characteristics

Linear parabola

Working temperature (℃)

Ordinary type: cast iron: -20 ~ 200, cast steel: -40 ~ 250, cast stainless steel: -60 ~ 250

Cooling type: cast steel: -40 ~ 450, cast stainless steel: -60 ~ 450

Medium temperature (℃)

200 or less (for confluence valve)

Inherent adjustable R

30

Nominal pressure PN (MPa)

1.0 1.6 4.0 6.4

Allow leakage

Hard Seal: Ⅳ grade soft seal: VI level

Mode of action

Power open, power off

Signal range (mA.DC)

0 ~ 10 4 ~ 20

voltage

220V, 50H Z 380V, 50H Z 24V, AC / DC

Ambient temperature (℃)

Servo amplifier: 5 ~ 45 Actuator: -10 ~ 55

Full travel time

S

normal type

12.5

20

32

48

Electronic type

30

30

48

60

Power consumption (W)

normal type

28

35

Electronic type

6

15

25

40


Connection standard:

◆ connection size and standard
· Flange standard: cast iron flange according to GB4216.5-84 steel flange according to GB9113-88, JB / T79-94 
· Flange sealing surface type: PN10, PN16 is convex PN40, PN64 is convex Surface, the valve body is concave 
· Structure length: GB12221-89 
· Jacket insulation jacket Heat transfer body interface: Butt welding ф18X4 
* The body flange and the flange end face distance can be manufactured according to user-specified standards. 
Such as ANSI, JIS, JPI and other standards. 

◆ Ordering Information: When
ordering, please provide the following information: 
· Control valve name and model 
· Nominal diameter (mm) 
· Nominal pressure (MPa) 
· Rated flow coefficient (KV) 
· Inherent flow characteristics 
· Media name, Temperature, flow rate, etc. 
· Mode of operation of the whole machine (power ON / OFF) and input signal 
· Valve body, trim and packing material 
· Accessories (manipulator, servo amplifier, etc.) 
· Other special requirements


  Hufa Holding Co., Ltd. Is a well-known manufacturer and supplier of common valves such as emergency cut-off valve, pressure reducing valve, regulating valve, chemical valve, water control valve and electric two-way valve.Mainly used in petroleum, chemical, steel, metallurgy, building materials, light industry, electricity, environmental protection, food and other industries, products throughout the country and are used in many national key projects, but also exported to Asia, Europe and other regions.Main products include: solenoid valve, regulating valve, chemical valve, water control valve, electric two-way valve, general valve;6 main products for a variety of industrial needs to provide a full range of fluid control solutions.Hufa Holding Co., Ltd. strives to build a well-known high-end control valve manufacturing enterprises, national high-tech enterprises, specializing in high-end control valve scientific research design, manufacturing and sales, technical exchanges, import and export trade in one of the international entity enterprise headquarters is located in zhejiang, the pump and valve capital of China.The company was founded in July 2004, Shanghai branch production base is located in Shanghai, construction area 1250 square meters, and has the domestic leading production equipment and multi-functional, intelligent valve inspection system and test center.Companies adhere to the advanced equipment localization and technical independent innovation, the pursuit of do the best employees, do the best products and the best enterprise goal, strive to build the company into a domestic first-class, the world level of control valve supplier, for the continuous development of automation industry to make greater contribution!Today's Shanghai valve brand has formed a technical system with independent intellectual property rights as the core, relying on science and technology for innovation;Set up r&d center, used in technical improvement, innovation and development of new products, and the introduction of the United States, Germany, Japan and other advanced level of technology and products, through the absorption and reference to manufacturing technology, perfect products, form with independent core high-end products, reduce the distance with the world's advanced products, in the domestic and international market to get customers' trust and respect.Related products have won many honors such as Shanghai high-tech achievements transformation, and won the high-tech enterprise in 2011.At the same time, the company is the first in the domestic industry through TS(pressure pipe components manufacturing license), explosion-proof electrical production license, ISO9001 (international quality management system), CE (European Union safety mark) and other quality systems and special industry requirements certification system. Hufa products are distributed throughout the country and applied in many national key projects, mainly used in petrochemical industry, aerospace, national defense, hvac, electric power equipment, biopharmaceutical, medical equipment, food machinery, environmental protection water treatment and other industries;Ju liang company and Shanghai baosteel, navy logistics, China petroleum group, tongfang shares, hangzhou holishi, kweichow maotai distillery, China nuclear power, the 12th national games of the main torch Taiwan and many other well-known enterprises and key projects to establish a good relationship of cooperation.Business philosophy of Shanghai Valve:Persist in not forgetting the original intention, continue to move forward; while pursuing the material and spiritual happiness of all Shanghai Valve partners, go all out to make perfect products and contribute to social progress.Company purposeTechnological innovation, quality assurance, honesty, efficiency and considerate serviceCorporate objectivesEstablish an international first-class control valve of Chinese enterprises.Company value
Similar Product Recommend