Welcome Customer !

Membership

XwbooMachine ToolGrinding machineGrinding MillConical disk grinding mill
  • $item.Title
  • $item.Title

Conical disk grinding mill

Changsha PDM Machinery (Group) Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Grinding Mill
Place of Origin
,
Conical disk grinding mill
Introduction


PDM Machinery’s conical grinding mill and thick powder mill used together are suitable to make and separate  0~0.5mm, 0~1mm,0~2mm,1~2mm  ceramic and tile powder.

1. Global highest level CFB desulfurization  powder grinding mill

2. Advanced thick powder separator

The structural features of GPM series disc mills:

The service life of roller bearing is long. The rocker arm device of GPM series generalized disc mill is fixed, the roller only rotates without revolution, the bearing force of grinding roller is single, and the working state is very stable. Thin oil circulation lubrication can also be used to improve the working environment of bearings.

The safety of the equipment is good. Using the bottom center drive, all the rotating parts are surrounded by the body, which will not bring hidden danger to the operator in any case.The service life of wearing parts is long. Using the mature surfacing technology of vulnerable parts of vertical mill, the wearing parts are not only wear-resistant, but also easy to repair, with low cost.

Working principle:

Material bed is pulverized repeatedly by rolling of the rollers.

Working principle of disck grinding millThe machine is vertical structure, including rotor device, roller mill device, force application device, feeding and discharging device, etc. The motor drives the grinding plate to rotate at a constant speed through the transmission mechanism. The material enters the mill through the feed port in the middle of the mill and falls on the center of the grinding plate. The uniform rotating grinding plate disperses and flattens the materials outward by the action of centrifugal force, forming a certain thickness and uniform material layer on the grinding plate. Under the action of centrifugal force, the material moves outward along the circumference of the grinding plate. At the same time, the material layer on the grinding plate is crushed by the roller pressure. The pressure of the grinding roller comes from the combined force of the pressure of spring or oil cylinder and the gravity of the grinding roller. Under the constant action of centrifugal force, the material layer on the grinding plate continuously moves to the top of the grinding plate, and the materials beyond the top of the grinding plate fall into the discharge port and discharge the mill under the action of gravity. In this way, a grinding is completed.

 

 

Equipment structure and characteristics

GPM series generalized disc mill is mainly composed of motor, planetary gear reducer and lubricating oil station (belt pulley is adopted for small model), grinding roller and rocker arm device, grinding disc device and lower shell.


Characters

1. It can be controlled easily the grain size and distribution of output material by adjusting the height of the blocking cylinder, the spring pressure and milling gap.

 

2. The principle of material crushes  material and middle working pressure(3-5MPa)make 50% powder size less than 1.5mm without any separation and avoid big energy consumption, noise and excessive impacted wear caused between roller and liner.




Waterfall thick powder separator


PDM Machinery’ conical grinding mill meets the requirement of the curve of limestone furnace grain size. 


We, Changsha PDM Machinery (Group) Co., Ltd , established in 1982 year, 1992 year, 199 year and 2002 year, with own 4 factories, one for oil pump manufacture, one for split case pump manufacture, one for turbine pump, boiler &multistage pumps manufacture, one for other types of pump manufacturer. We own our cast factory. Changsha PDM Machinery (Group) Co., Ltd is with its production bases for industrial water pump and mechanical products, ranging from pump series, variable frequency control series, soft start cabinet, valve, motor and diesel set, electric machine and the series of complete set of water supply equipment. The products are widely used in the filed of city planning, water conservancy, architecture, fire protection, electric power, environment protection, petroleum, chemical industry, mining and medicine. Now we are the largest manufacturer for the split casing centrifugal pump and various pumps in China presently ,especially the industrial big pump. The biggest impeller for single stage can be up to 2.6m. The highest head can be up to 240m. In the technic and artcraft we have strong advantage. We have been keeping in touch with lots of well-known manufactures including EBARA, KSB, INGERSOLLRAND, ITT-GOULDS and so on. We have been established long-term cooperation with ITT Industries Group Nanjing Goulds Co., in China. ITT Industries Group Shenyang Feili Co., in China, Andritz China Branch Company in international market. For oil pump, we have cooperated with oil company in Iran such as nioc, niscoc, Sinopec, Oil well, ELF, Cheuron, etc. 80% oil pumps we made are exported into all of the world. Every year, we take part in Dubai fair. Our pump is very welcome in Middle-east and America. We are the largest boiler, mine pump, multistage pump manufacturer in China, our boiler pump head can up to more than 1500m. The diesel pump set is very stable and famous made in our company, the power can be up to more than 1000 KW by Cummins, cat diesel drive. For turbine pump and mixed flow pump, most of them export to Thailand, India, Egypt, Africa for government huge projects. Most of big foreign project is from by Chinese government recommended. For other pump, such as slurry pump, IS pump, submersible steel pump, sewage pump, End suction pump, pipe pump, etc, we formed a factory especially to make them. It is our work to provide professional technical support, satisfied products and outstanding marketing services for clients.
Similar Product Recommend