Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberXenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test ChamberContact Resistance Tester
  • $item.Title
  • $item.Title

Contact Resistance Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Xenon Lamp Weather Resistance Test Chamber, Xenon Lamp Aging Test Chamber
Place of Origin
HuBei, WuHan
Output current:100A/DC 200A/DCMeasuring range:0~19.99mΩ 0~10.00mΩResolution ratio:1μΩTesting accuracy:0.5 class
Introduction

According to the requirements of the new Code for Electrical Equipment Handover and Preventive Test, the test current of electrical circuit resistance of various switch-gear shall not be less than 100 A. According to the requirements of the new regulations, our company has designed and developed a series of products of a new generation of circuit resistance tester. This kind of product is suitable for testing the main contact resistance value of high and low voltage switch, the DC resistance value of high and low voltage cable line and so on. The HM6090-200A circuit resistance tester adopts 100 A、200A constant current output, the maximum output voltage is up to 10 V(3 times of the conventional instrument), and the test line with thin section can be used, which greatly reduces the labor intensity of the field testers. The test process is automatically implemented by single chip microcomputer control, with high precision, good retesting, single key operation, simple and easy to carry out. The test data is displayed with lattice liquid crystal with backlight, which is suitable for different working environment.

Main parameter




Model Type

HM6090-200A


Output current

100A/DC

200A/DC

Measuring range

0~19.99mΩ

0~10.00mΩ

Net weight

6㎏


resolution ratio

1μΩ 


Testing accuracy

0.5 class


ambient temperature

﹣10℃~50℃


relative humidity



working power supply

AC220V±10﹪ 50Hz±1Hz 



Operation cautions


1.working power: AC220V±10% 50HZ

2.it should be reliably grounded.

3.Tested circuit breaker outlet or inlet can not be grounded on both sides

4.Removal of test lines is not allowed during testing period.

5.The safety regulations for electrical tests shall be strictly enforced throughout the test

Troubleshooting


Common faults

Failure cause

No display

1)AC220V Power outlet fuse is damaged

2)AC220V power cord does not connect well

3)Instrument internal plug may be loose.

Displaying “Tested circuit is in open circuit”

1)Tested circuit is in open circuit,pls kindly check whether the wiring is good;

2) Poor local contact of the tested loop, pls reconnect the tested product and rub the contact point forcefully

Ammeter indication anomaly

1)The power line is too thin and too long

2)The internal power is in loop faults.

Abnormal LCD display

1)The power line is too thin and too long

2)The supply voltage is under-voltage

Resistance display abnormal

There is poor contact in the tested loop

Over range

1)The resistance of the tested product exceeds the measurement range

2)Poor local contact of test circuit


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend