Welcome Customer !

Membership

XwbooWarehouse LogisticsCard ReaderUHF RFID ReaderContactless Keypad RFID Reader
  • $item.Title
  • $item.Title

Contactless Keypad RFID Reader

Shenzhen Huiqitong Xing Electronic Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
UHF RFID Reader
Place of Origin
GuangDong, ShenZhen

Shenzhen Huiqitong Xing Electronic Co., Ltd.

Contact

Phone

Fax

0086-755-88353000
Contactless Keypad RFID Reader

Contactless Keypad RFID Reader


ModelCard Reader Access Control Keypad
ColorBlack / White
VoltageDC9~16V
Current≤100mA
Ambient Temperature-25°C~75°C
Reading Range5~15CM
Output FormatWiegand,RS485/232
Card TypeEM-ID/Mifare-IC
Comunication DistanceWG≤100M,RS485≤1200M


About Use
When the card approach the reader, the red light turn into green, after glinting to turn redcolor again, the buzzer sound shows transiting data. It has 500ms proximity time distance for card proximity. After finishing card proximity, if the same ID card is still in the proximity range, reader will not send out the data, neither giving any sound hint. But for Different ID card entering Proximity Area, Reader can do response continually and send out the data
Specification
@ Wiegand 26bits/ Wiegand34bits Standard Format Data Output
@ Less than 0.2 second Response Speed
@ Less than 0.5 seconds Proximity Time Distance:
@ 2-15cm Proximity Range
@ Support UEM 4100 ID Card or compatible with it( 64bits, Manchester Code) and Mifare 1 Card (13.56 MHz Frequency)
@ -25; Cto 75; C Ambient Temperature, 10%-90% Ambient Humidity
@ Built-in Antenna
@ Built-in LED (Double Color LED)
@ Built-in Loud Speaker (Buzzer)
@ DC 12V Working Voltage, 70mA Working Current
@ 100 Meters Communication Distance
@ Real Time Data Transfer
@ Black Color
@ PVC Case Material (Black Resin for Water-Proof Function)
@ 109*88.4*34(mm)
Installation
Using + type screw driver to loosen the screw between the panel and motherboard. And then embed the motherboard to the side wall with the plastic plug and screws.
Wire Connection
Red DC 5V-16V
Black GND
Blue D1
White D0
Brown BEEP
Green LED
Yellow Alarm
Notice
1. Confirm the electric voltage (DC12V) and differentiate positive anode and cathode of power supply
2. When external Power is used, make sure sharing the power with Controller Box or using the same GND
3. When the distance between card reader and controller is more than 50m, please use Power Line with at least 1.5 square cm Dia, or using several parallel Network wires


  Established in 1997, Shenzhen Fondvision/Ework Technology Development Co.,Ltd specialize in R&D and production of Security Products.These are Our advantages that innovative engineer team, Multi SMT line ,5000 square meter factory base and OEM/ODM,etc.The factory monthly capacity come to 50000pcs.We have complete range of security line products.The access Control and RFID reader with lowest cost and good quality are especially well known among Business partners.Our engineer team release new products very often. New QR code Access controller and RFID card reader series products are popular among Market.Smart access control with Cloud Server database are highly recognized,also.“Quality always comes first”. We pay much attention for that. The factory have multi test equipment.The products will be conducted aging test for 72 hours. QC staffs make piece-by-piece checks for all devices.Access control and RFID readers could meet international Standards,like CE,FCC,ROHS.Our main oversea market are Asia, Europe,Middle East and South America.Many customers have long term cooperation with us. Holding the principle of "Creation endless, Trustworthy Forever”, we will try to provide most valuable products and service in our major area aiming to benefit our customer and end-users, also develop each other.
Similar Product Recommend