Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
Order Data
Specification | Order No. |
CTSC-100 CPU126, 24VDC power supply, 24DI×24VDC,16DO×24VDC, Dual-channel communication | CTS7 116-1AD20-0X40 |
Performance Parameters
Physical Features | |
Dimension(W×H×D) | 198×80×62mm |
Power Dissipation | 11W |
Memory Features | |
Program Memory | 12KB,8KB for common user,4KB for encrypted users |
Data Memory | 8KB |
Power-failure retention power | button batter |
General Features | |
Timers in total 1ms 10ms 100ms | 128(T0-T127) 4 16 108 |
Counters in total | 128(button battery) |
Internal Memory Bits | 256(button battery) |
Time interrupts | 2×1ms resolution |
Edge interrupts | 4 rising edges/ falling edges |
Boolean execution speed | 0.5µs |
Float execution speed | 16µs |
Runtime clock | √ |
Integrated Communication Features | |
Communication ports | 2 port,PORT0:PPI, RS485 PWL, FPROT: free port,RS485 |
PPI Baud Rate | 9.6, 19.2kbps |
Baud Rate of Freeport | 1.2k to 115.2kbps |
Maximum cable length per segment Isolated repeater applied Isolated repeater unapplied | When it is 1200 m, 38.4k. 50 m |
Maximum number of stations | 4 stations per segment,32 stations per network |
Maximum number of masters | 16 |
Point to point (PPI Mater Mode) | × |
Power Function | |
Input Voltage | 20.4 to 28.8 VDC , with anti- reverse connection protection |
+5V power for the extended bus | 500mA |
24 VDC Sensor Power supply | × |
I/O Features | |
Number of integrated Digital inputs | 24 |
Input type | Sink/Source |
Number of integrated Digital outputs | 24 |
Output type | Solid-MOSFET(Source) |
Digital I/O mapping area | 128 (64 inputs/64 outputs) |
Analog I/O mapping area | 32(16 inputs/16 outputs) |
Maximum number of expandable I/O modules | 3 |
Maximum number of digital I/O | 128 |
Maximum number of analog I/O | 12AI/6AO |
Pulse catch inputs | 24 |
High-speed counters Single phase counters Double phase counters | 3×50KHz,Support HSC0、HSC1and HSC2 and HSC3,do not support 、HSC4and HSC5,1×30KHZ,support9,HC0 |
Digital Input Features | |
Integrated Digital Input | 24 |
Input type | Sink/Source |
Rated Voltage | 24V DC |
Maximum continuous permissible voltage | 30V DC |
Logical 1 Signal (minimum) Logical 0 Signal (Maximum ) | 14 VDC,2.5mA 5 VDC,1mA |
Isolation( field side and logical circuit) Optical isolation(Galvanic) Isolation group | √ 500V AC,1 minute refer to the Terminal Identification |
Simultaneous Inputs | 24 |
Maximum cable length Shielded Unshielded | 500 m(standard input)、50m(high-speed counter input) 300 m( standard input) |
Digital Output Features | |
Number of integrated digital output | 16 |
Output type | Solid-MOSFET(Source) |
Maximum rated current of each output Surge Current | 0.75A 8A,100 millisecond |
Lamp load(Max) | 5W |
On- state resistance | 0.3 ohm,Max: 0.6 ohm |
High-speed pulse output | 2×50KHz, Q0.0、Q0.1and Q0.2,directionless output; Support MC_PTP_R/MC_SPEED_CTRL etc. of CPU, do not support PTO/PWM of programming software |
Simultaneous output | 16 |
Two parallel outputs | only when the two outputs are in the same group |
Maximum cable length Shielded Unshielded | 500m(standard output) 150m(standard output) |
Size Diagram:
Wiring Diagram

Definition of Communication Port
Connector | PIN | FPORT(RS485) | PORT0(RS485) |
| 1 | Shell grounded | Shell grounded |
2 | Logical | Logical | |
3 | RS-485 Signal B | RS-485 Signal B | |
4 | RTS(TTL) | RTS(TTL) | |
5 | RTS(TTL) | RTS(TTL) | |
6 | +5V,100Ω resistances in serie | +5V,100Ω resistances in serie | |
7 | +24V | +24V | |
8 | RS-485 Signal A | RS-485 Signal A | |
9 | / | / | |
Shell | Shell grounded | Shell grounded |