Welcome Customer !

Membership

XwbooInstrumentationTesting MachineOther Testing MachinesCT PT Tester
  • $item.Title
  • $item.Title

CT PT Tester

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Testing Machines
Place of Origin
HuBei, WuHan
Designed for automatic testing of protection and measurement CT/PT, suitable for laboratory and on-site testing. Support detection of CT and PT Meet the requirements of GB1207, GB1208 and other regulations. No need to connect other auxiliary equipment, a single machine can complete all test...
I. Designed use


Designed for automatic testing of protection and measurement CT/PT, suitable for laboratory and on-site testing.


II. Main features


Support detection of CT and PT

Meet the requirements of GB1207, GB1208 and other regulations.

No need to connect other auxiliary equipment, a single machine can complete all test items.

Comes with a miniature fast printer, which can print test results directly on site.

Using intelligent controller, simple operation.

Large-screen LCD, graphical display interface.

The CT/PT (excitation) inflection point value is automatically given according to the regulations.

Automatically give 5% and 10% error curves.

3000 sets of test data can be saved, which will not be lost after power failure.

Support U disk transfer data, can be read through a standard PC, and generate WORD report.

Small and light weight ≤22Kg, very conducive to on-site testing.


III.Main test functions of the tester:


CT

PT

Volt-ampere characteristic (excitation characteristic) curve

Volt-ampere characteristic (excitation characteristic) curve

Automatically give the inflection point value

Automatically give the inflection point value

Automatically give 5% and 10% error curves

Ratio measurement

Ratio measurement

Polarity judgment

Polarity judgment

AC withstand voltage test

A flow test

Core demagnetization

AC withstand voltage test


Core demagnetization



IV. Main technical parameters of the tester:


project

Parameter

Power supply

AC220V±10% 、50Hz

Device output

0~1000V(20A Peak)

Note: 0~5A is the real value, more than 5A~20A is the calculated value

current output

0~600A

Excitation measurement accuracy

≤0.5%(0.2%*reading+0.3%*range)

CT

Ratio measurement

Scope

≤5000A/1A(25000A/5A)

Precision

≤0.5%

PT

Ratio measurement

Scope

≤500KV

Precision

≤0.5%

working environment

Temperature: -10℃ ~ 40℃, humidity: ≤90%, altitude: ≤1000m

size and weight

Size: 410mm × 260mm × 340mm, weight: ≤22Kg


V.Working condition requirements


1. Input voltage 220Vac±10%, rated frequency 50Hz;

2. The tester should be powered by a power outlet with a protective ground. If there is a problem with the connection of the protective ground, or the power supply does not have an isolated connection to the ground, the tester can still be used, but we do not guarantee safety;

3. The ambient temperature corresponding to the parameter is 23℃±5℃; the guaranteed value is valid within one year after factory calibration.、


VI.Operation mode and main interface


introductionHow to use the controller

The controller has three operating states: "Left Rotate", "Right Rotate", and "Press". These three operations using the controller can be conveniently used to move the cursor, enter data, and select items.

main menu

There are 7 options in the main menu: "Excitation", "Transformation Ratio Polarity", "AC Withstand Voltage", "One Pass Current", "Data Query", "Demagnetization", and "Return", which can be selected and set by the controller .

CT test

When performing current transformer excitation characteristics, transformation ratio, polarity, primary current, AC withstand voltage, and demagnetization tests, please move the cursor to "CT" and select the corresponding test options.


CT excitation (volt-ampere) characteristic test

After pressing the "Excitation" key, you will enter the test interface.


parameter settings:

Excitation current: The setting range (0-20A) is the highest setting current output by the instrument. If the current reaches the setting value in the experiment, the current will stop automatically to avoid damage to the equipment. Usually the current setting value is greater than or equal to 1A, and the inflection point value can be tested.

Excitation voltage: the setting range (0-1000V) is the highest setting voltage output by the instrument, usually the voltage setting value is slightly larger than the inflection point voltage, so that the ratio of the curve display can be more coordinated, the voltage setting is too high, the curve is close to the Y axis, and the voltage setting is too high Low, the curve is close to the X axis. If the voltage reaches the set value during the experiment, the boost will be automatically stopped to avoid damage to the equipment.


  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend