- Applied to various signal monitoring, airbag ignition current;
Suitable to AC, DC and pulse current measurement;- Max. wire diameter 6mm;
- Easy to install;
- Excitation voltage 4.5V-10.5V;
- Response time about 3us;
- Anti-Shock>2000g.
The current sensor JCS06D is based on the Hall principle to achieve high-precision measurement of line current. The independent power supply is completely isolated from the measurement system, and the direct output voltage signal has a good linear relationship with the measured current. JCS06D is equipped with high-performance wear-resistant cables, and the cable length can be customized. In addition, Dallas ID and connectors can be equipped according to customer needs.
Specification (5V Excitation Voltage, 25℃):
| Name | Unit | Value |
| Range | A | ±15 |
| Over Range | A | ±30 |
| Non-Linearity | % | 0.5 |
| Hysteresis | % | 0.5 |
| offset | mV/V | 5 |
| Response Time | us | 3 |
| Exc. Voltage | VDC | 4.5-10.5 |
| Consumption | mA | 10 |
| Anti-Shock | g | 2000 |
| Isolation | MΩ | >100 |
| Opera. Temp. | ℃ | -30-+85 |
| Store Temp. | ℃ | -40-90 |
| Material | / | Al. Alloy |
| Weight | grams | 10 |
| Dimension | mm | 25×20×8 |
Dimension:

Wire Define:
| Red | Excitation+ |
| Black | Excitation- |
| White | Signal- |
| Green | Signal+ |
| Shield | Connector case |
![]() | Current Sensor JCS06D-EN |








