Illustrate:CX-FS-FR12 type Electronic flow switch is suitable for different kinds fluid,4.Widely used in pneumatic and hydraulic systems, flow monitoring for recycled water, cutting fluid and lubricating oil , the protection of pump’s run idle.
CX-FS-FR12 Electronic flow switch( Thermal differential type )
Brief Introduction1.Suitable for the gas and liquid measurement
2.The set range can be 1-20m/s and have relay output (230VAC.4A).
3.Concise and direct indicator ,and with high reliable
4.Widely used in pneumatic and hydraulic systems, flow monitoring for recycled water, cutting fluid and lubricating oil , the protection of pump’s run idle
Main Features1.No movable parts
2.Maintenance free and Easy installation
3.Suitable for variable diameter demand
4.Switching value can be adjusted continuously
5.Extremely low pressure loss
6.Compact structure
7.LED indicator display flow trend and switch state
Technical Parameters| Set range | 1…150cm/s( water),3…300cm/s(oil),20…2000cm/s(air) |
| Output | PNP, NPN, Relay ,4-20mA, NO+NC (SPDT) |
| Power supply | 24V±20%DC |
| Switching Current | Max.400mA(PNP or NPN type ), Max.4A( Relay type ) |
| Unload current | Max.80mA |
| Flow indicator | LED (6) |
| Set type | potentiometer set |
| Proof Pressure range | 100bar |
| Temperature gradient | 4℃/s |
| Response time | 1--13s,standard is 2s |
| Initialization time | 8s |
| Electrical protection | reversed-phase ,short circuit ,overload protection |
| Protection class | IP67 |
| Medium temperature | 20--80℃ |
| Environment temperature | -20--80℃ |
| Storage temperature | -20--100℃ |
| Connection | M12 connector /2m cable (option) |
| Material | Probe is stainless steel . Housing is PBT |
Model| Model | Connection | Power | Output |
| CX-FS-FR12-G12H-DC-RQ | G1/2 | DC24V | relay |
Dimension
G1/4 or G1/2 screw connection
Installation
When mounted vertically , it should install on the tube which flow direction is from the bottom to the top . When mounted horizontally , the probe should avoid air and sediment .
Electric connection
LED functions and setup ( switch type )
Red LED light: If the cutting flow or velocity is less than the set value. The switch will be release and the analog value will be 4mA .
Yellow LED light: If velocity equal to the set value ,switch action .
Yellow and green LED light :It means that velocity is larger than set value. If the velocity will be faster ,the green LED will be lighter ,
Installed the flow switch well ,let the velocity suit for monitoring and adjust the potentiometer .Let the first the green LEC just turn light . Then, after the velocity less than the current value , the switch will be released . To make the switch point less than the current velocity , it can adjust the potentiometer and make the green LED lighter .
Cixi flowmeter Co., Ltd. was established in 1986 and we have especially set up Shanghai Cixi Instrument Co. Ltd in order tohandle the deals of Export and obtained the License of Export and Import in 2008. Since 1986, Cixi flowmeter Co. Ltd has beendedicating itself to research and manufacture of various kinds of flowmeters and level meters. With sophisticated experience intechnology and management, we has made a name for itself as an excellent manufacturer of various kinds of flowmeters andlevel meters. Thanks to outstanding performance of products, CIXI Flowmeters are being applied in more and more fields wherethere's liquid to measure. CIXI Flowmeters have found users in many countries besides China, such as Malaysia, India, Thailand,Vietnam, South Africa and so on. Increasing number of users are finding that CIXI Flowmeter are kind of product with superperformance and reasonable price. our target is to serve our customers eficiently and innovatively in order to save their moneyand time. Any requirements from you will be responded in 24 hours.