Welcome Customer !

Membership

XwbooInstrumentationFlow MeterFlowmeterCX-WGFM-XML wet gas flow meter
  • $item.Title
  • $item.Title

CX-WGFM-XML wet gas flow meter

Cixi flowmeter Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Flowmeter
Place of Origin
,

Cixi flowmeter Co., Ltd.

Contact

Phone

Fax

021-57634819
Illustrate:XML type is normal-type, it adopts brass material, and generally used in the scope of non-corrosive gases.XMF type is anticorrosive-type, it adopts stainless steel material, can measure corrosive gases.

CX-WGFM-XML Wet Gas Flow  Meter


Main Performances
Name and unit

Name and unitModel
XML-1XML-2
Drum capacity(m3)0.002(2L)0.005(5L)
Rated flow(m3/h)0.2(200L)0.5(500L)
Top flow (m3)100100
Excess flow(m3/h)0.3(300L)0.75(750L)
Min. scale value(m3)0.8×10-50.2×10-4
Normal pressure (Pa)10001000
Accuracy in rated flow (%)±1±1
Pressure in rated flow( Pa≤)8080
Outline dimensions(L/W/H)490×264×220 mm490×264×304 mm
Net weight(Kg)4.55.4

Measuring Medium
XML type is normal-type, it adopts brass material, and generally used in the scope of non-corrosive gases.
XMF type is anticorrosive-type, it adopts stainless steel material, can measure corrosive gases.
 
Usage
1. Put the meter on the worktable, adjust screws to enable blister of leveler in the centre, and maintain for a long time in use.
2. Open sealed screw cap of water level controller, pull out internal wool rope.
3. In the plug jack of thermometer or manometer, inject distilled water into the meter, when redundant distilled water drain from hole of water level controller ( sometimes it is clean when outflow one drop), then put wool rope in sealed screw cap of water level controller, and fasten the sealed screw cap.
4. Install thermometer and manometer, (every case 10Pa)
5. Connect air channel according to direction of gas outlet and intake, and sealled.
6. Open gas valve, and then you can measure gas.
 
Attentions While Using
1. When you use it, you must always pay attention to the water level in the meter, otherwise it will affect measuring accuracy.
2. When you use it, temperature should be maintained at 15 ~ 25 ℃, and the temperature is the same as room temperature, its temperature difference should be ≤ 2 ℃.
3. You’d better readout in a few weeks after the operation of the meter.
4. When pressure of measuring gas is go beyond normal pressure 1 ~ 6 times (1 ~ 6 KPa), the meters can still work, at this time manometer should be removed , then use rubber plug plugs up mounting holes of manometer.
5. When flow of measuring gas is go beyond rated flow, the meters can still work, but measuring accuracy will be greatly decreased.
7. The meter should not be installed in a cold room, for fear that it will freeze inside.
8. In normal circumstances, check out accuracy every year at least.
 
Accessories
1 pc of thermometer
1 pc of manometer
2 rubber plugs

Diagram Of the Meter

  
Cixi flowmeter Co., Ltd. was established in 1986 and we have especially set up Shanghai Cixi Instrument Co. Ltd in order tohandle the deals of Export and obtained the License of Export and Import in 2008. Since 1986, Cixi flowmeter Co. Ltd has beendedicating itself to research and manufacture of various kinds of flowmeters and level meters. With sophisticated experience intechnology and management, we has made a name for itself as an excellent manufacturer of various kinds of flowmeters andlevel meters. Thanks to outstanding performance of products, CIXI Flowmeters are being applied in more and more fields wherethere's liquid to measure. CIXI Flowmeters have found users in many countries besides China, such as Malaysia, India, Thailand,Vietnam, South Africa and so on. Increasing number of users are finding that CIXI Flowmeter are kind of product with superperformance and reasonable price. our target is to serve our customers eficiently and innovatively in order to save their moneyand time. Any requirements from you will be responded in 24 hours.
Similar Product Recommend