Welcome Customer !

Membership

XwbooPaper machineryPapermaking Auxiliary EquipmentDryerD5M Low-speed Centrifuge
  • $item.Title
  • $item.Title

D5M Low-speed Centrifuge

Shanghai Lu Xiangyi Centrifuge Instrument Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Dryer
Place of Origin
ShangHai, ShangHai

Shanghai Lu Xiangyi Centrifuge Instrument Co., Ltd.

Contact

Mr. Sam Lu

Phone

18801858806

Fax

86-21-51316027
The machine is programmable. The operation data can be stored automatically. LED display and the touching panel makes the operation easy.The real-time conversation of Speed and RCF is convenient for operation.

Technical performance

It has micro-computer control, electronic lock and AC variable-conversion motor which delivers high torque.

Imported compressor unit with Non-CFC refrigerant. It measures up to environmental standards.

The machine is programmable. The operation data can be stored automatically.

LED display and the touching panel makes the operation easy.

The real-time conversation of Speed and RCF is convenient for operation.

It has self-locking device, over-speed safety device, over-temperature safety device, imbalance safety device and automatic alarm device.

It has 10 files of acceleration and deceleration level for your choice.

Silastic sealed ring comfort to GMP. US FDA certificated.


Low-speed centrifuge use rules:

1. When the centrifuge is in the pre-cooling state, the centrifuge cover must be closed. After the centrifuge is finished, the rotor should be placed on the test bench and the residual water in the cavity should be dried. The centrifuge cover is open.

2. Rotating head When pre-cooling, the rotating head cover can be placed on the platform of the centrifuge or placed on the test bench. Do not screw it on the rotating head, because once it is accidentally activated, the rotating head cover Will fly out, causing an accident!

3. After the screw cap is tightened, be sure to touch the gap between the rotor and the cover with your fingers. If there is a gap, unscrew and retighten until the gap is confirmed before the centrifuge can be started.

4. During the centrifugation process, the operator must not leave the centrifuge room. In case of abnormality, the operator cannot turn off the power (POWER), press STOP. Fill in the centrifuge usage record before pre-cooling.

5. Do not use fake and inferior centrifugation to make the tube, and do not use aging, deformed, cracked centrifuge tubes.

6. Can leave after the last routine safety check using a centrifuge on holidays and evenings.

7. In the event of machine failure during the use of low-speed centrifuge, please contact us in time for damage.

When installing a low-speed centrifuge, pay attention to the position of the installation. When installing, the lid of the centrifuge should be opened as much as possible. Use a small level to find the level on the spindle. Then adjust the screw of the adjusting bolt next to the four casters to find the level, especially The point to note is that one of the feet cannot be lost. For the centrifuge, in order to ensure the normal use in the later stage, the requirement for the ground is that the floor should be firm and not recessed, and the ground at the installation and fixing should be flat and firm.

The low-speed centrifuge literally means that the centrifuge is relatively slow, and today's Xiaobian will explain, if you think so directly and simply that it will cause errors, because the low-speed centrifuge is not all because of the low speed. Mainly because the rotor speed is slow, it is related to the rotor problem; in addition, because the nature of the test items requires or is the test demand, these two aspects determine the Low-speed centrifuge.


Specification

Model

D5M

Max speed

5000r/min

Max RCF

3780xg

Max capacity

750mlx4

Speed accuracy

± 50r/min

Time setting

1min~99min

Noise

<65db(A)

Power supply

AC220V 50Hz 20A

Dimension(LxWxH)

650mmx710mmx1100mm

Packing size(LxWxH)

740mmx830mmx1300mm

Net weight

140kg


Accessories Center

  Bioridge Centrifuge has the headquarter located in Shanghai, China. It covers 7000m2 and own standard workshop of 9000m2. The branch factory is located in Hunan, the GMP-designed factory occupies 3000m2.Bioridge Centrifuge is specialized in manufacturing centrifuge more than 20years. There are a strong technical force, R & D capability, advanced processing equipments and full set of testing devices. The unique design and stable quality win praises from customers in the filed of colleges and universities, research units, pharmaceuticals, medical treatment and petrochemical engineering.Bioridge Centrifuge always pay attention to talents cultivation and reservation. There are many senior engineers and technicians who have experience of foreign education and working. With the guidance of leading experts, we cooperate with tertiary institutions and research institute to develop new product. We are the first manufacturer who design and produce the high speed refrigerated centrifuge with the max speed of 25000rpm in China. And we had our own continuous flow rotor, which is made of 316L. The 2000ml round bucket of Large capacity refrigerated centrifuge is convenient for pharmaceuticals company to extra substance.With the reputation enhancement, our Bioridge brand aims to oversea markets in recent 10years. Until now, more than 40 countries had imported our products and sold all of the world. We always stick to principle of quality first, and supply good sale-service.Bioridge Centrifuge is the manufacturer who had got FDA certificate in USA since 2015. In addition, the company has the ISO9001: 2015, ISO13485:2016, CE-ECM low voltage and CE-IVD & EN61010."Customer supreme" is our service aim, "continuous innovation" is our goal, we will do best to supply good products and service. In addition, we are glad to build technical cooperation with enterprise home and abroad, in order to promote the development of centrifuge business. Our corporate culture and your supports can lead us to a bright future
Similar Product Recommend