Welcome Customer !

Membership

XwbooGeneral PartsPumpDeep Well PumpDeep Well Submersible Water Pump
  • $item.Title
  • $item.Title

Deep Well Submersible Water Pump

Taizhou Hangge Pump Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Deep Well Pump
Place of Origin
,
Pump information ◎ Motor housing: 201 Stainless steel ◎ Material of pump body: 201/304 Stainless steel ◎ Impeller: Anti-sand plastic impeller ◎ Inlet/Outlet: Brass ◎ Structure: Multistage Pump ◎ Pump type: Submersible pump/Deep well pump ◎ Power Source:Electric ◎ Application: Usually used for deep well water extraction

深井泵背景图加文字.jpg




不锈钢主图3



参数.png



Operation technology

1. Deep well pump should be used in the sand content of less than 0.01% of the clean water, the pump room is equipped with a pre-moistening tank, the capacity should meet the pre-moistening water at a start.

2. The newly installed or overhauled deep well pump should adjust the clearance between the pump shell and the impeller, and the impeller should not be rubbed with the shell in operation.

3 deep well pump before operation should be clear water into the shaft and bearing housing for pre-moistening.

4. Before the deep well pump is started, the inspection items should meet the following requirements:

1) The bolt of base foundation has been tightened;

2) The axial clearance meets the requirements, and the safety nut of the adjusting bolt has been installed;

3) The packing gland has been tightened and lubricated;

4) Motor bearings have been lubricated;

5) Rotate the motor rotor and the stop mechanism by hand are flexible and effective.

5. Deep well pump shall not be idling without water. The first and second impeller of the pump should be immersed in the water level below 1m. The water level in the well should be observed frequently during operation.

6. During operation, when large vibration is found around the foundation, the wear condition of the bearing of the pump or the packing of the motor should be checked; When too much wear and tear and leakage, should replace a new piece.

7. If the deep well pump containing mud and sand has been sucked and discharged, clean water should be applied before stopping the pump.

8. Before stopping the pump, close the outlet valve, cut off the power supply and lock the switch box. When out of use in winter, the water in the pump should be put clean.








详情页产品-2


详情页产品-3


详情页产品-4


pump factory


pump factory-2


factory details





Factory introduction

A high-quality factory is the guarantee of excellent products.


证书.jpg


Your goal of access to water starts and ends here


TAIZHOU HANGGE PUMP CO., LTD is a group company with three factories and one export company, specializing in water pump, motor, pump accessory, etc.Our company mainly produces and exports deep well pump, sewage water pump, inline pump, stainless steel sewage pump, pump accessories to international market such as Europe, South & North America, Africa, Middle East etc. Our annual turnover is more than 8 million U.S. Dollar! We also obtain certificate of ISO 9001 management system and always take good care of product quality.HANGGE becomes stronger year by year fully relying on competitive prices, excellent product quality and professional service. “being credit-worthy and always providing with best service” is main principal for our business operation. Our products are all strictly controlled at every step during designing, producing, packing and quality controlling process.We will keep optimizing our products and expanding the scope of product category. Adhering to the rules of promoting “mutual benefit and common development”, we devote ourselves to set up a favorable business relationship with all our clients. We care about our clients, today, tomorrow and forever!Welcome to call and visit us!
Similar Product Recommend