Welcome Customer !

Membership

XwbooInstrumentationTesting MachineTransformer Testing MachineDigital Phase Meter
  • $item.Title
  • $item.Title

Digital Phase Meter

Wuhan Goldhome Hipot Electrical Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Transformer Testing Machine
Place of Origin
HuBei, WuHan
Waveform of tested signal: Sine wave、β=0.02Frequency of tested signal: (50±0.2)HzPosition of tested lead in jaw: no special requirementsAmplitude range of tested signal when test phase: 100~220V、0.5A~1.5AExternal frequency electromagnetic interference: should avoidWaveform of tested signal: sine、β=0.05Frequency of tested object: (50±0.5)HzPosition of tested lead in jaw: no special requirementsAmplitude range of tested signal when test phaseWhile measure U1-U2: 30V~500VWhile measure I1-I2 : 10mA~10.00AWhile measure ......
Brief introduction


This digital phase meter is designed for field measurement of voltage, current and phase. It’s handheld, with high precision, low cost, and double channel input.

This Digital Phase Meter can be used to measure the phase between U-U, I-I and U-I in the field, distinguish the inductive and capacitive circuit and phase sequence of three-phase voltage, detect the wiring group of transformer, test the secondary circuit and the mother differential protection system, and read out the phase relationship between the CT of differential protection groups,check the wiring of the watt-hour meter, etc

The clamp current transformer is used to input the measured current, so there is no need to disconnect the measured line during the measurement.

When measuring the phase between U1-U2, the two input circuits are completely insulated and isolated, so that the short-circuit of the tested line caused by possible miswiring can be completely avoided, to avoid meter burning .

High contrast LCD screen, words up to 25mm, screen Angle can be freely converted to about 70°, to obtain the best visual effect.

The Digital Phase Meter shell is made of engineering insulating material and rubber anti-vibration protective cover, which is safe and reliable.


Basic error


1.Reference working environment

1)Temperature: (23±5)℃

2)Humidity: (45~75)% RH

3)Waveform of tested signal: Sine wave、β=0.02

4)Frequency of tested signal: (50±0.2)Hz

5)Position of tested lead in jaw: no special requirements

6)Amplitude range of tested signal when test phase: 100~220V、0.5A~1.5A

7)External frequency electromagnetic interference: should avoid

2.Basic error limit

1)AC voltage

Voltage

Resolution

Error limit

20V

0.01V

±(1.2%RD+2)

200V

0.1V

±(1.0%RD+2)

500V

1V

±(1.2%RD+2)

Input impedance:2MΩ for each one

2)AC current

Current

Resolution

Error limit

200mA

0.1mA

±(1.0%RD+2)

2A

1mA

10A

10mA

3) Phase
U-U、U-I、I-I

Range

Resolution

Error limit

0~360°

1°

±3°

The voltage input loop impedance when measured in U1-U2 phase:40kΩ


Rated working environment


1)Environment temperature: (0~40)℃

2)Humidity: (20~80)% RH

3)Waveform of tested signal: sine、β=0.05

4)Frequency of tested object: (50±0.5)Hz

5)Position of tested lead in jaw: no special requirements

6)Amplitude range of tested signal when test phase

While measure U1-U2: 30V~500V

While measure I1-I2 : 10mA~10.00A

While measure U1-I2 or I1-U2: 10V~500V、10mA~10.00A

7)External frequency electromagnetic interference: should avoid

Rated working error limit of Digital Phase Meter

Under above rated working environment, the measured rated working error should not beyond two times related basic error.


Other technical specification


1.Digits: three digits and a half

2.Sample rate: 3 times/second

3.Power: single 9V battery, current less than 5mA

4.Size

Shell: 192mm×95mm×55mm

Clamp shell: 140mm×42mm×20mm

Jaw: Φ7mm×9mm


More pictures about double clamp voltmeter


1 (1)


F.A.Q


1.Are you manufacturer or trading company ?

We are ISO certified manufacturer .

2.How about the warranty ?

One year free and lifelong maintenance .

3.Can you afford calibration certificate ?

Yes , we can afford calibration certificate issued by third authoritative institution .

4.Do you have Technical Backup to all customers from different countries ?

Sure, we have rich-experienced engineer service you within 24 hours through phone call , ,or on-line communication to solve your problems . And if if necessary , our engineer can visit your company to afford technical support face to face .


Company profile


Wuhan Goldhome Hipot Electrical Co.,ltd was founded in 2008 ,as predecessor is the State owned tertiary Enterprises enterprises. Main products included Primary business was sale, design and manufacture high-voltage transmission and insulation test set. hipot tester, GIS PD test system, AC/DC high-voltage test transformer, primary current injection test set,insulation resistance test meter, Insulation withstand voltage test device and other testing instruments.

1 (2)

  Wuhan Goldhome Hi pot Electrical Co.,ltd(short for Goldhome Hi pot) was established in 2008, its predecessor was state-owned third industry enterprises, one of the earliest enterprises specially in develop, design and manufacture high voltage testing equipment in China.In 2016, merged with Wuhan Sang Electric Co., Ltd. , we realize advantageous compartmentalize and resources reorganization.Now it has become a high-tech enterprise integrating R&D, production, marketing installation and commissioning.1.our-historyOur FactoryGoldhome Hi pot is located in Huading Mould Industrial Park, Economic and Technical Development Zone, Wuhan City, Hubei Province, China, working area more than 4000 square meters.As a high-tech enterprise, we are supported by natural advantages from various research universities in Wuhan city. Goldhome Hi pot works closely with professors from State Grid Power Science Research Institute, Electrical Engineering Colleges of Wuhan University and other scientific research institutions, constantly improving technology and updating products . Now Goldhome Hi pot has more than 20 patented technologies, and many software Copyrights!2.our factory-1product and product applicationOur ProductOur advantage products included AC Resonant Test System, PD Free Test System, AC/DC Hi pot Tester, Primary Current Injection, VLF Hi pot Tester, transformer tester,impulse generator,Transformer oil tester,HV Switch gear Tester ,Insulation Tester,ground Resistance Tester,cable fault locator,relay test set,CT PT analyse,arr ester tester and sf6 gas analyzer,etc.Product ApplicationAll the performance indexes of above testing equipment can reach the leading level in China, widely used in power supply bureau, power plant, power construction, railway, petroleum, chemical industry, metallurgy, coal and other industries.In recent years,our factory continues to expand overseas markets, some competitive products are already exported to American and European countries, Africa, Middle East, etc , and well praised by customers.product applicationOur CertificateAll product process is strictly in accordance with international standards and power industry regulations. And the products are through the national, provincial power authorities testing, as well as CE certification! At present,0ur company has received ISO9001:2015 quality management system certification, ISO14001:2018 occupational health and safety management system certification, and ISO14001:2015 environmental management system certification,and also had got SGS certification.We has more than 20 patented technologies,such as The utility model patent of a frequency conversion series resonance test device,The utility model patent of Lightning impulse voltage testing equipment,The utility model patent of DC high voltage generator,The utility model patent of microcomputer relay protection tester,The utility model patent of High voltage switching characteristic tester., etc.4.certificateoverseas market & our serviceOverseas MarketOur products are sold to Europe, Asia, Africa, North and South America and Oceania, Middle East, etc.and are well received by customers.We had won the bids for the purchase of high-voltage no-partial discharge test equipment from the Polish state-owned insulator production plant, the Myanmar National Grid cable fault tester purchase project, and the high-voltage test equipment purchase project of a Russian power installation and test engineering company.We also sell to end customers, and a single device can also be sold. For example, there are power maintenance and installation companies in Indonesia, South Africa, Denmark, and South Korea, and universities and research institutions purchase and use our test equipment.At the same time, our sales targets also include agencies. At present, we already have cooperated with agents in Singapore, Israel, Mauritius , etc.We insist on providing customers with first-class products and first-class services with reliable product quality and perfect service team.5market-1Our service1.Strict factory testAll products will be assembled and test strictly accord with our product process standard. All qualified products will be issued factory release reports and certificate labels.Defect products or non-qualified products won’t be allowed to make deliver.2.Providing technical materialsDuring the product acceptance, we provide the related manual sheets, packing list,qualified certificate labels, factory test reports and other technical documents.3. Support technical guidanceWe also provide the training for the operators. Complete training includes the skilled operations of our equipment, maintenance and troubleshooting . it also ranges the commissioning and test of our products at site!After-sale service1.First-use responsibility systemAfter the product is delivered, the technician can guide the operation at site if the client requires, and be responsible for the first use of each part2.One year warrantyAll products warranty is 1year, life-time maintenance .During the warranty period, if any defects or damaged because of product’s quality, maintenance or replacement can be provided with free charge in order to let our client’s satisfied !3.TroubleshootingIf the troubleshooting is not difficult, and client can handle with it by themselves, we can offer the call-on line guide within 1 hour!If the troubleshooting is difficult to handle with for client, we can promise that the best solution can be provided within 24 hours!
Similar Product Recommend