Membership
Help
ACE METER TECHNOLOGY CO.,LIMITED
ACE METER TECHNOLOGY CO.,LIMITED
Digital Vortex Flow Meter Pulse and 4-20mA
The vortex flowmeter sensor output signal contains a periodic flow signal, but also contains various noises. The output signal of the vortex flowmeter sensor is analyzed discretely using a fast Fourier transform algorithm with a power spectrum analysis function to calculate the signal frequency reflecting the flow rate. By changing the sampling frequency and spectrum correction method, the accuracy of the measurement system is improved and accurate flow is obtained.


| Product Name | Vortex flow meter |
| Nominal diameter | DN15-DN300,DN150~DN2000 can use the insertion vortex flowmeter, and the big caliber is more suitable for insertion type. |
| Scope of application | Gases (air, oxygen, nitrogen, gas, natural gas, chemical gas, etc.), liquids (water, high temperature water, oil, food liquid, chemical liquid, etc.), steam (saturated steam, superheated steam) |
| Medium temperature | -40°C~250°C,-40°C~350°C,-40°C~400°C |
| Nominal pressure | ≤1.6MPa ≤2.5MPa ≤4MPa Special pressure can be customized |
| Accuracy level | Liquid 0.5% |
| Gas, steam 1.5% | |
| insertion type 2.5% | |
| Medium velocity range | Liquid:0.6~6m/s,Gas:5~60m/s,steam:5~70m/s. |
| Output Signal | Voltage pulse,4-20mA Current output,HART Agreement,RS485. |
| Converter power supply | Voltage pulse output:+12VDC, 4~20mA Current output:+24VDC; Live LCD display:3.6V1 No. 1 lithium battery power supply, the service life is more than 2 years |
| Ambient temperature | Voltage pulse output:-30°C~+65°C, 4~20mA Current output:-10°C~+55°C; |
| Live LCD display:-25°C~+55°C | |
| Body material | 1Cr 18Ni 9Ti (Other materials according agreement to supply) |
Digital signal processing method of vortex flowmeter
The original output of the vortex flow sensor is a sine-like signal with a lot of noise. The digital signal processing method is used to convert the time-domain signal into the frequency-domain signal, so that the velocity signal frequency is measured and the fluid volume flow information and mass flow information are obtained through conversion.
The vortex flowmeter processes digital signals mainly by the following two methods
1) Use a digital filter to filter the mixed signal and reproduce the original velocity signal.
2) Perform frequency domain analysis, and use FFT algorithm to transform the time domain signal to the frequency domain for spectral analysis to obtain the flow velocity result.




Digital Vortex Flow Meter Pulse and 4-20mA