Welcome Customer !

Membership

XwbooSecurity & ProtectionLightning Protection EquipmentSurge Protective DeviceDIN Rail TRSS-485 Control Signal Surge Protector
  • $item.Title
  • $item.Title

DIN Rail TRSS-485 Control Signal Surge Protector

Zhejiang THOR Electric Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Surge Protective Device
Place of Origin
ZheJiang, WenZhou
DIN Rail TRSS-485 Control Signal Surge Protector


Product introduction:
The TRSS 485 control signal lightning protector is used to protect sensitive high-speecommunication network lines from damage caused by lightning induced voltage, power interference, electrostatic discharge, etc. The signal lightning protection device adopts multi-level protection circuit, selects world-famous components, and is manufactured by advanced production technology. It has the characteristics of large current capacity, low residual voltage level, sensitive response, stable performance, and reliable operation.
Installation and maintenance:
1. The lightning protection device is connected in series between the protected equipment and the signal channel.
2. The input terminal (IN) of the lightning arrester is connected to the signal channel, and the output terminal (OUT) is connected to the input terminal of the protected equipment, and cannot be reversed.
3. Reliably connect the ground wire of the lightning protection device with the ground wire of the lightning protection system.

4. This product does not require special maintenance. When the lightning protection device is suspected to be malfunctioning, the lightning protection device can be removed and thenchecked. If the system returns to normal after the system is restored to the state before use, the lightning protection device should be replaced.

Electrical Characteristics

Type

TRSS-485

Max continuous operating voltage(VDC) Uc

12

Voltage protective level(V)Up<

<20

Nominal discharge current In(8/20μS)

5kA

Max discharge current

Imax(8/20μS)

10kA

Response time

ns

≤1

Insertion Loss


≤0.5dB

Adapt to data transmission rate

2Mbps

Dimension

63mm*18mm*90mm

Installation method

series

Circuit Diargam:



Dimension:



  Thor is all about protecting against the damaging effects of power transients. It is our goal and mission to connect our customer challenges with high-quality, right-priced solutions and products – completed by unrivaled customer service and technical support.Incorporated in 2006, Thor Electric Co., Ltd has built everything to offer a wide range of innovative and reliable surge protection solutions and products.Thor is following the international quality system standards, is ISO 9001 certified and our technical standards are in line with GB18802.1-2011/IEC61643.1.All types and classes of our lightning and surge arresters 20KA~200KA(8/20μS) and 15KA~50KA(10/350μS) are tested and pass all the requirements based on their class.Thor has been designing new products to meet the RoHS directive since 2006. Thor’s ongoing commitment to RoHS compliance includes continuing efforts to reduce the presence of hazardous substances in the design and manufacture of a growing number of popular products.Zhejiang Thor Electric Co., Ltd is committed to meeting the requirements of the European Union’s Waste Electrical and Electronic Equipment (WEEE) directive. This directive requires producers of electrical and electronic equipment to finance the take-back for re-use or recycling of their products placed on the EU market after 2005.
Similar Product Recommend