Membership
Help
北京海谊科技有限公司
北京海谊科技有限公司
DISINFECTION EFFECT TEST KIT

Storage:
Detection reagent A : store at room temperature;
Detection reagent B: Refrigerate at 4℃.
Test Procedure:
Pipette 0.25ml sample milk to centrifuge tube, add 2.5ml detection reagent A to it, shake and mix completely.
Place it in water bath at 36-44℃ for 10 min, then add 3 drops of detection reagent B, shake immediately to mix evenly.
After 5 min, observe the color
Interpretation of Test Results:
If it is blue, which indicates that the pasteurization is not complete.
Precautions and Warnings:
This test kit is only for rapid detection, not the basis of legal inspection.
Do positive control experiment if necessary, in order to observe the result
The temperature of water bath can not be too High or too low, should control 36-44℃.
Shake immediately after adding detection reagent B.
Control the time strictly in the test procedures.
Kit Components:
| Detection reagent A | 1 bottle |
| Detection reagent B | 1 bottle |
| 5ml centrifuge tube | 2 pcs |
| Introduction Manual | 1 |
Shelf life : 12 months