Membership
Help
Longer Precision Pump Co., Ltd.
Longer Precision Pump Co., Ltd.
Applications:
Biopharma and other industrial
Product Instruction:
Technical Specifications
Pump drive model | dPOFLEX GP02 | dPOFLEX BP02 |
Housing material | Cast aluminum | 304sst |
Speed range | 1rpm-300rpm, CW/CCW | |
Speed resolution | 1rpm | |
Display | 3.5 inch LCD, Chinese or English | |
Clock function | Clock can be set for log record, and displayed on the running screen | |
Work mode | Flow rate mode, dispensing mode, calibration mode | |
Flow rate mode | Pump runs continuously at the set flow rate, and displays flow rate and pump speed on the screen | |
Flow rate setting range | 1.0ml/min-9.0L/min (depends on pump head and tubing) | |
Dispensing mode | Pump repeats the dispensing at set volume, cycles, interval time and back suction parameter, and displays single volume, total volume, dispensed cycles/target cycles on screen | |
Volume of single dispense | 1.0mL-225L(depends on pump head and tubing) | |
Dispensing cycles | 1-9999 and unlimited | |
Interval time | 1s-9999s | |
Calibration function | Improve the flow rate and dispensing volume accuracy | |
Control mode | Keypad control, external signal control and communication control | |
Communication control | Interface: RS485, Profibus(optional) | Interface: RS485, Industrial Ethernet(optional) or Profibus(optional) |
External control | Speed control signal: 0-5V, 0-10V, 0-10kHz, 4-20mA | |
Status output | Running/stop, fault status: relay signal (dry contact) | Pump Speed: frequency signal |
Tubing compressed detection | The pump will automatically stop when detects the tubing is not compressed well, and an alarm message will be promoted. The function can be enabled and disabled. | |
Actual flow rate measurement | Measure and display the flow rate by connecting ultrasonic flow meter (optional) | |
Fluid pressure measurement | Measure and display the fluid pressure inside the tubing by connecting pressure sensor (optional) | |
Pump status when power on | Pump stops or runs in the flow rate mode. Pump stops in the dispensing mode | |
Keypad lock function | Enable the keypad lock function to lock the keypad automatically after 20s standby, (start/stop key will not be locked) | |
User access control | Three levels of user accesses (administrator, technician, operator) | |
Electronic signature and audit trail | Meet the requirement of FDA 21CFR Part 11 | |
Log record | Record 90 days operation history, and can be exported directly | |
Support IQ/OQ | Meet GMP requirement | |
Certificate | CE, UKCA | |
Dimension(LxWxH) | 215 x 358 x 243mm (drive only) | 215 x 362 x 258mm (drive only) |
Power supply | AC100-240V/115W 50/60Hz | |
Operating condition | Temperature: 5℃-40℃, relative humidity≤99% | |
IP rating | IP66 | |
Weight (drive only) | ≤10.4kg | ≤10.5kg |
Other parameters
Product Model(Product Code) | Pump Head | Roller Number | Tubing | Reference Max. Flow Rate (L/min) |
dPOFLEX GP02 (05.02.83A) | YZ35-13 | 3 | 26# | 2 |
73# | 4 | |||
82# | 6.5 | |||
82#A | 8 | |||
KZ35-13 | 3 | 26# | 2 | |
73# | 4 | |||
82# | 6.5 | |||
82A# | 8 | |||
184# | 9 |