Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
Characteristic:
Economical Servo Drives,Power range 200W-1500W,Support Modbus communication protocol and CANopen communication protocol,Easy to use, both economical and reliable, high cost-effective.
1.Single phase 220VAC power supply, Power range 200W-1KW.
CTSD E10-B2012-M110 | E10 series 200W servo drive(With CANopen function and debugger),adaptation Mseries motor |
CTSD E10-B4012-M110 | E10 series 400W servo drive(With CANopen function and debugger),adaptation M series motor |
CTSD E10-B7512-M110 | E10 series 750W servo drive(With CANopen function and debugger),adaptation M series motor |
CTSD E10-B1022-M110 | E10 series 1.0KW small inertia servo drive(With CANopen function and debugger),adaptation M series motor |
CTSD E10-B1022-M111 | E10 series 1.0KW middle inertia servo drive(With CANopen function and debugger),adaptation M series motor |
CTSD E10-B1522-M110 | E10 series 1.5KW middle inertia servo drive(With CANopen function and debugger),adaptation M series motor |
CTSD E10-B1522-M111 | E10 series 1.5KW large inertia servo drive(With CANopen function and debugger),adaptation M series motor |
Performance Parameters
Type Specification | E10 | |||||
0.2、0.4、0.75、1.0、1.5(KW) | ||||||
Basic Specifications | Input Power | Main Power | Single phase, 220VAC±15%,50/60Hz | |||
Control Power | 24VDC±15% | |||||
Encoder Feedback | Incremental Encoder, 2500 p/r (Resolution:10000) | |||||
Cooling Method | Natural cooling/Fan-cooled radiator. | |||||
Control Method | Use FOC(Magnetic positioning control)and SVPWM(Space Vector Modulation) | |||||
Communication Functions | Based on RS-485 ModBus protocol, support radio,some support CANopen. | |||||
Braking Resistance | Internal / External braking resistance(Mainly applied to emergency start-stop situation) | |||||
Protective Function | Over-voltage、under-voltage、over-current、over-load、over-heat、over-speed、excess position deviation、encoder feedback error、over-braking ratio、over travel inhibit、EEPROM error etc. | |||||
Display and Operation | 5 LED Digital lights, can connect external servo debugger | |||||
Parameter Setup | MagicWorks Tuner software | |||||
Properties | Speed rate of change | Load rate of change | 0~99%:0.1% or less(Under rated revolution) | |||
Voltage rate of change | Rated voltage:±15%:0%(Under rated revolution) | |||||
Temperaturerate of change | 25±25℃:±0.1% or lower(Under rated revolution) | |||||
Frequency Response | 500Hz(when JL=JM) | |||||
Position Output | Output Type | Open-collector output | ||||
Input And Output Signal | Digital Input | 7DI | ||||
Servo-ON、Alarm clear、CW/CCW overtravel inhibit、Internal speed selection、torque limitation selection、Gear ratio switching、Control Mode switching、Gain switching、 pulse input inhibit、zero-Speed clamp、 clear,IO multiplexing function registers selection. | ||||||
Digital Output | 4DO | |||||
Servo-Ready、alarm output、Torque limit output、positioning complete、speed Arrival、zero -Speed detection output、brake clear output,IO multiplexing function registers selection. | ||||||
Analog Input | 12bit A/D: 1 input | |||||
Analog Output | -- | |||||
Position Control Mode | Max. Input Pulse Frequency | Differential method:500KHz,open-collector method:200KHz | ||||
Pulse Command Mode | Pulse+Direction | |||||
Command Control Mode | External pulse control /16 communication register command | |||||
Feedforward Compensation | 0~1000‰(Setup resolution 1‰) | |||||
Positioning Complete | 0~32767 command unit(Resolution set to 1 command unit) | |||||
Electronic Gear Ratio | Electronic Gear Ratio :N/M times,N:1~10000, M:1~10000(1/200<200)<="" font=""> | |||||
Speed Control Mode | Analog Input | Voltage Range | -10V~+10V(Resolution:12 bit ) | |||
Input Resistance | 19K | |||||
Sampling Frequency | 1KHz | |||||
Command Control Method | External analog Command/8&n, bsp;internal speed command/32 communication register command | |||||
Command Smoothing Mode | Lowpass filtering,Smoothing time constant :0~2500(x10us) | |||||
Torque Limitation | Internal parameters/External analog | |||||
Torque Control Mode | Analog Input | Voltage Range | -10V~+10V(Resolution:12 bit ) | |||
Input Resistance | 19K | |||||
Sampling Frequency | 1KHz | |||||
Command Control Mode | External analog Command /32 communication register command | |||||
Command Smoothing Mode | Lowpass filtering,Smoothing time constant :0~2500(x10us) | |||||
Speed Limitation | Internal parameters/External analog | |||||
Application Environment | Operating Temperature | 0℃~55℃ | ||||
Storage Temperature | -20℃~70℃ | |||||
Humidity | Lower than 90% RH (No condensation) | |||||
IP Level | IP20 | |||||
Installation Place | No corrosive gas,inflammable gas, oil mist or dust etc. | |||||
Installation Method | Install in vertical position | |||||
Altitude | Lower than 1000m | |||||
Atmospheric Pressure | 86Kpa~106Kpa | |||||
Size Diagram