Membership
Help
Guangzhou Daheng Automation Equipment Co.,Ltd
Guangzhou Daheng Automation Equipment Co.,Ltd
Dimension: 1050*1000*1700mm
AB ratio:100:100-100:10 adjustable
Movment Track:Dot/Line/Arc/Circle
Speed:500mm/s(Movement speed)1-12ml/s(gluing out speed)
Accuracy: ±2%(potting) ±2%(mixing)
Input pressure:0.5MPa-0.7MPa
Viscosity:50cps-30000cps(Viscosity can be down via heating glue)
Operation:Manual/Automatic
Meter Pump:Gear pump/Screw pump/Double cylinder plunger pump
Flow Control: Digital Input
Programming method: teaching programming
Automated control system: PLC / touch screen (programming, modification, storage, etc.)
Glue control system: AB glue suction valve to achieve independent operation of AB glue
Mixed mode: dynamic static optional, instant mixing, easy to clean
Tank:stainless steel tank (60L)、(50L)、(40L)、(25L)、(10L)optional
Power supply: 220V/50Hz/1200W ( Test under heating unction is not power on)
Liquid A & B are kept in two tanks separately. There are two sets of metering pumps inside the machine, draining out liquids individually from tank A & B. Liquid A & B mix with each other in the mixer pipe and dispensed out according to the programmable data.
1. Fully automatic operation, accurate proportion and even mixing
2. Glue dosing while mixing, no waste of glue and no waste of consumables. Precise dosing and dispensing.
3. The glue amount of the product is consistent and good. The edge of the machine is clean without glue.
4. Machine glue dosing save much time and effective and lower cost
5. There is no need for glue pouring staff, only one operator is needed to complete the mass production
1. Ratio between the base agent and hardener: 1:1 or 10:1
2. Fillers:Abrasive the base agent includes percentage of additives and fillings such as aluminum oxide, or silica powder, in order to increase the hardness or heat conduction
3. The mixed liquid is abrasive, cause big friction to the pump.
4. Need to vacuum to remove the air bubble inside
5. Not easy to mix the two components evenly.
6. Vacuum: to remove the air bubble inside the adhesive;
7. Self-cleaning;
8. Heating: pre-heat the resin before used
9. Dynamic Mixing Method to mix evenly;
10. Daheng Patent Metering Pump: anti-abrasive, long life span; high precision;Multi-nozzle: to improve capacity.
11. High Precision Valve;
12. Quality & Strict position control system.
13. Multi-head nozzle available.
D&H is a company who has its own core tech and provides professional glue controlling solutions in the industry.
In 2006 we developed the patent-“double cylinder plunger pump”,the glue dispensing machine with such a pump type was launched into the market successfully.This patent design becomes the heart of a new generation of metering device.The new design leads the liquid controlling device into a direction of high filling,high precision ,high crystallization,high output speed and production line.
In 2015 we deveoloped the core patent-“Intelligent Gluing”,the first intelligent glue dispenser in the world was launched into the market.The new generation machine will achieve calculation,communication,remote-control and self-management;push forward the development of the intelligent equipment and intelligent factory.
With over 20 patents our glue potting machine are widely applied in the industry like LED,lighting,auto,the electronics,power supply,capacitor,transformer,circuit...
We are headed in Guangzhou China,built branches in Shenzhen,Beijing,Shanghai,Xiamen,Chongqing,Zhongshan...;We also cooperated with customers from over 30 countries such as Germany,the USA,South Korea,Russia,India...We are becoming lading among our conpetitors in the industry.
We believe in “Success Comes from Details,Innovation Improves the Future”.We provide our customers the service support 24h*7days,monthly training-up,software-upgrade,keeping improvement and making us more perfect.
We are searching for the agents and cooperative partners from different countries,hoping,with you together,to provide the best adhesive control solutions for the customers in the world.