Membership
Help
Dongguan Woodfung Machinery Co., Ltd
Dongguan Woodfung Machinery Co., Ltd
Edge Bander WF-360A Automatic Edge Banding Machine
It is a multifunctional fully machine.
Due to the sophisticated mechanical structure, the machine has higher stability and easier operability.
Finishing device is used to repair and process excess edge banding material on the upper and lower parts of the sheet edge banding.
It adopts the structure of automatic profiling and high-frequency high-speed motor to ensure the smoothness of the upper and lower parts of the sheet when trimming.
Main Material brand:DELTA Touch Screen/CHINT Electronic/DELTA PLC/solenoid valveAirTac/CSK guide/EASUN Cylinder
WF360A functions:Gluing → End Cutting → Fine Trimming →Scraping → Buffing
WF360A Specifications:
| Model | WF360A |
| Motor power | 7.4KW |
| Panel width | ≥60mm |
| Panel thickness | 10~60mm |
| Edge bａnd thickness | 0.4~3.0mm |
| Edge bａnd width | 12~60mm |
| Feed speed | 0~13m/min |
| Working pressure | 0.7Mpa |
| size(LxWxH)cm | 3800×1000×1600mm |
| Weight | 1450KG |
Automatic edge bander for different board and different edge bander
PAINTFREE,LAMINATE,PRATICAL,MDF,SOLID PANELS
SOFT VANEER,PVC,ACRYLIC,PMMA,ABS EDGE BANDERS
Automatic Edge bander application:
DELTA Touch Screen Operation Panel
Taiwan Delta PLC microcomputer control system adopts touch screen intelligent control, which is convenient, quick and easy to use
Gluing part
The glue pot is heated and glued, and the glue is coated with an imported technology structure to make the sheet and the edge banding evenly glued.
The edge bａnd and the sheet are pressed tightly through the pressing wheel, and the adhesion is firm.
End Trimming
The front and rear aligning head is composed of the front aligning head and the rear aligning head. It moves through a linear CSK guide rail.
It adopts the structure of automatic tracking and high-frequency high-speed motor to make the cutting smooth
Fine Trimming
The finishing knife is R2, leaving 5~6 wire allowance for scraping and trimming the arc with R2 trimming knife
Scrapping
It is used to eliminate the secondary wave marks caused by the cutting process of trimming non-linear motion, and make the upper
ａnd lower parts of the board more smooth and tidy. At the same time, the scraping can also adjust the size of the arc to make the edge banding effect better.
Polishing
Use a plate polishing wheel to clean the processed plate, remove excess glue, and make the edge-sealing end surface smoother
Optioinal Functions:
Rough Trimming
Rough trimming knife is used to leave a margin of 40-50 wire for fine trimming, and automatic die tracking and high-frequency high-speed motor are
used for rapid cutting.
Pre-milling
Use double milling cutters to modify the marks and burrs to achieve a better edge banding effect
Grooving
Horizontal grooving and back board grooving are used for direct grooving of side boards and door line grooving,
reducing the working procedures of panel saws and vertical milling machines. It is convenient and quick to form at one time.
Corner Rounding
The profiling tracking and rounding device can make the end surface of the plate smoother and look atmospheric
Woodfung Brａnd Edge bander Automatic edge banding machine finished working
