Membership
Help
Shanghai Xinhou Spraying & Purification Equipment Co., Limited
Shanghai Xinhou Spraying & Purification Equipment Co., Limited
Eductor nozzle is according to Berboulli jet principle and designed by reasonable Geometric surface parameters. Liquid jet from cone nozzle at high speed, and cause a low pressure area around leading opening. High speed flow and liquid spray from mixing diffuser by 1:4. Eductor nozzles can improve surface processing quality of workpiece. M model mixing nozzle adopt high-performance material: Carbon fiber polypropylene die-casting, and also stainless steel, with excellent chemical resistance, max performance temperature is 120℃.

Plastic Agitating Tank Mixing Eductor Nozzles
Plastic Tank Nozzles are available in PP and PVDF. A major advantage of Polypropylene is its higher temperature resistance. PVDF is resistant to most acids and bases. They are resistant to low temperatures abd stable to ultraviolet and extreme weather conditions. PVDF is self-extinguishing and non-toxic.

Stainless Steel Venturi Tank Mixing Eductor Nozzles
Tank Mixing Eductors are used to agitate liquid, dissolve powdered solids in liquid, and to mix two or more liquids intimately within a tank or other vessel without the use of baffles or moving parts inside the tank. Tank Mixing Eductors are operated by a flow of pressure liquid through the nozzle.
Description
Thread size | 1/4’’; 3/8’’ ; 1/2’’ ; 3/4’’ ; 1’’ ; 1-1/2’’ |
Material | Stainless steel(304,316) ; Plastic(PP,PVDF,PTFE) |


● Provides Circulation and agitation in liquid rinsing and coating tanks
● Allows smaller pumps to circulate large volume of liquid
● Large flow opening minimize plugging and clogging
● Manufactured of Polypropylene or investment cast, 304 or 316 stainless steel for excellent corrosion chemical resistance and durability
● Available in 1/4'', 3/8'', 1/2'', 3/4'', 1'' and 1 1/2'' BSP inlet connections.


Approx. flow rate | Model No. | Inlet Thread size (BSP) | Orifice Dia. | Dimension | Inlet Liquid Pressure | |||||||||
|
|
|
| D | d | L | 0.5 | 1 | 1.5 | 2 | 2.5 | 3 | 3.5 | 4 |
|
|
| (mm) | (mm) | (mm) | (mm) | bar | bar | bar | bar | bar | bar | bar | bar |
Inlet Flow Rate ''A'' ( l/ min ) | E - 1/4-1 | 1/4'' | 3 | 48 | 33 | 95 | 7.2 | 10.6 | 13 | 16 | 17 | 20 | 24 | 26 |
| E- 1/4-2 |
| 5 | 32 | 22.5 | 69 | 11.3 | 16 | 19.5 | 23 | 25 | 28 | 30 | 32 |
| E -3/8 | 3/8' | 8 | 52 | 38 | 103 | 29 | 42 | 51 | 59 | 65 | 70 | 77 | 82 |
| E- 1/2 | 1/2'' | 9 | 66.5 | 48 | 146 | 36 | 53 | 62 | 72 | 83 | 88 | 97 | 103 |
| E - 3/4 | 3/4'' | 10 | 75 | 56.5 | 161 | 43 | 64 | 74 | 85 | 97 | 106 | 116 | 124 |
| E - 1 | 1'' | 12 | 102 | 71 | 215 | 54 | 96 | 100 | 107 | 122 | 134 | 146 | 156 |
| E - 1 1/2 | 1 1/2'' | 14 | 112 | 75.5 | 252 | 106 | 151 | 184 | 215 | 243 | 259 | 288 | 308 |
Entraine Liquid ''B'' ( l/ min ) | E - 1/4-1 | 1/4'' | 3 |
|
|
| 26 | 36 | 45 | 52 | 58 | 63 | 68 | 73 |
| E- 1/4-2 |
| 5 |
|
|
| 42 | 59 | 72 | 84 | 93 | 102 | 110 | 118 |
| E -3/8 | 3/8' | 8 |
|
|
| 116 | 168 | 204 | 236 | 260 | 280 | 308 | 328 |
| E- 1/2 | 1/2'' | 9 |
|
|
| 131 | 212 | 251 | 288 | 324 | 352 | 386 | 421 |
| E - 3/4 | 3/4'' | 10 |
|
|
| 172 | 256 | 298 | 340 | 388 | 424 | 464 | 496 |
| E - 1 | 1'' | 12 |
|
|
| 217 | 384 | 390 | 428 | 489 | 534 | 585 | 625 |
| E - 1 1/2 | 1 1/2'' | 14 |
|
|
| 424 | 604 | 736 | 860 | 972 | 1036 | 1152 | 1232 |
Circulation Rate ''A''+''B'' ( l/ min ) | E - 1/4-1 | 1/4'' | 3 |
|
|
| 33.2 | 46.6 | 58 | 68 | 75 | 83 | 92 | 99 |
| E- 1/4-2 |
| 5 |
|
|
| 53.3 | 75 | 91.5 | 107 | 118 | 130 | 140 | 150 |
| E -3/8 | 3/8' | 8 |
|
|
| 145 | 210 | 255 | 295 | 325 | 350 | 385 | 410 |
| E- 1/2 | 1/2'' | 9 |
|
|
| 180 | 265 | 313 | 360 | 405 | 440 | 482 | 515 |
| E - 3/4 | 3/4'' | 10 |
|
|
| 215 | 320 | 370 | 425 | 485 | 530 | 580 | 620 |
| E - 1 | 1'' | 12 |
|
|
| 342 | 480 | 490 | 536 | 611 | 668 | 731 | 781 |
| E - 1 1/2 | 1 1/2'' | 14 |
|
|
| 530 | 755 | 920 | 1075 | 1215 | 1295 | 1440 | 1540 |
1 Electrophoresis tank liquid stirring
2 Fire protection water storage tanks
3 General particle agitation
4 Material injection and mixing
5 Breaking up a grease layer
6 Waste water treatment plants
7 Oil and gas storage tanks
8 Drinking water holding tanks and reservoirs
9 Sweep sludge & sediment from tank bottoms
10 Cooling towers and decorative fountains
11 Tank blending of oils
12 Tank Mixing Eductor in batch mixing application
13 Maintain solids in suspension


As a modern company, Shanghai Xinhou Spray Purification Equipment Co., Ltd not only pays attention to the quality of products, but also pays more attention to the service provided to customers. As a senior manufacturer that has been established for nearly 20 years, please all our customers trust us with our skilled technology and guarantee of high quality products. You can get immediate reply, detailed quotation, comprehensive project follow up and the most professional advice in xinhou company.
Tank mixing is necessary to keep contents and solutions thoroughly mixed, proper chemical/biological reactions, homogenization of products, sediment build-up prevention, proper draining/pumping, thermal stratification prevention and bacterial growth avoidance.Spray tank mixing nozzles greatly reduce the complexity, capital cost, and maintenance requirements of any system by utilizing a pump and submerged spray nozzles, in place of conventional mechanical components, to mix immiscible liquids or solids that need to be kept suspended.
Our Commitment-We insist quality products. We always put quality at first place. We will never chase cheap material for cheaper price. Quality is our guarantee for survival; We insist trying to improve the quality at same level of price; We insist to provide the most reasonable price at same quality level.
Eductor nozzles work on the venturi principle. They are fluid pumps with no moving parts. Eductor nozzles are positioned under the surface of fluid in a tank in order to keep it in motion. The liquid in the tank is circulated through the eductors so that it is "turned" over a period of time to ensure that sedimentation or liquid separation does not occur.
Xinhou range of mixing eductor nozzles, expressly designed for water treatment applications and suitable for many other applications where mixing and movement of high viscosity fluids are required, with the help of venturi principle, to obtain the circulation of large volume of liquid.There are many different reasons to use an eductor nozzle, including mixing chemicals, suspending solids, adjusting PH, and sweeping debris or sludge toward a filter intake.
Tank Mixing Eductor nozzles can augment or replace mechanical agitators. They can be used to introduce and mix a new fluid with an existing fluid. Like other eductors, they are inexpensive and require little maintenance in comparison with the equipment they can replace. This is particularly noticeable in applications requiring special corrosion resistant materials.
Eductor nozzles provides a homogeneous fluid mix without the use of air agitation of the solutions. As the liquid exits the nozzle at high velocity, it draws surrounding solution through the nozzle's "flow-through" chamber that's designed to eliminate internal material build-up. The additional liquid flow mixes with the pumped solutions.
Ideally edcutors should be positioned so that these plumes hit the opposite wall of the tank and so further dissipate as they do so. Little mixing will occur below the eductors so they should be positioned low in the tank and angled upwards. But if no sedimentation is to be tolerated then a set of eductors can be angled downwards to sweep along the floor of the tank.
Eductor Tank Mixing Agitation Nozzles are designed to convert high input fluid velocity into low pressure recirculation for effective mixing and agitation. The amount of fluid that exits the nozzle is three to five times the amount of fluid pumped. Our nozzles require minimal maintenance and are inherently clog-resistant for immediate and continuous mixing at temperatures up to 95° C.