Welcome Customer !

Membership

XwbooInstrumentationEnvironmental Test ChamberOther Test ChambersElectric blast drying oven (BGD series)
  • $item.Title
  • $item.Title

Electric blast drying oven (BGD series)

Hyde Science and Technology Limited

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Test Chambers
Place of Origin
ShanXi, XiAn
Electric blast drying oven (BGD series)

Application:

Applicable to electrical, electronics, instrumentation, materials, medicine and other scientific research, production units, mainly used for drying, baking, heat treatment, disinfection, insulation and other temperature tests.


Features:

1. Testing chamber of drying oven is made of stainless steel, and is manufactured by argon arc welding process. Double layers silicone rubber seals and mechanical locking devices effectively seal the test chamber. The shell of the drying oven is made of cold rolled steel sheet, and the double sides electrostatic epoxy polyester powder is sprayed at 180℃ for curing. The gap between the test chamber shell and the test chamber is filled with centrifugal glass wool felt to achieve the lowest heat loss.

2. Customers can adjust the height of the shelf as needed to make more efficient use of space.

3. Forced air convection duct structure; the air duct is located on the lower side of the oven, and the control cabinet is located at the bottom of the oven.


Security: 

Have power supply leakage and device short circuit protection, to ensure safe operation.

 

Technical parameter:

Model 

HD-3006BGD

HD-402BGD

Volume 

640 L

2460 L

Internal dimensions (D*W*H)

800*800*1000 mm 

1100*1500*1600 mm

External dimensions (D*W*H)

1070*1300*1280 mm

1440*2070*1900 mm

Performance

Maximum temperature

300 ℃

400 ℃

Minimum temperature

Room temperature + 20 ℃

Heating time

Room temperature....300℃ ≤90 min.

Room temperature....400℃ ≤100 min.

Temperature fluctuation

≤ ±0.5 ℃

Temperature uniformity 

≤ ±2.5 %

Controller 

Digital temperature controller, with self tuning PID function;

Heater 

Nickel-chromium heating wire

Power supply

380 V/50 Hz, Three-phase four-wire + earth wire

Power 

5.5 kW

7.2 kW

Noise

68 dB(А)

68 dB(А)


  Hyde Science and Technology Limited, established in 2010, is a high-tech corporation with equipment development, production, sale and maintenance integrated. Our company is engaged in studying and developing the climate testing techniques, manufacturing environmental testing equipment, researching and developing management software. Our main equipment are: temperature test chamber, temperature humidity test chamber, high low temperature/ low air pressure test chamber, thermal vacuum chamber, thermal shock testing chamber (2/3 areas), salt fog chamber, sand and dust test chamber, rain spray test chamber, temperature humidity vibration test chamber, walk in temperature (humidity) test chamber, customized test chamber, drying oven, etc.. These products are widely used in aerospace, electrical and electronics, instrumentation, national defense industry, solar modules, auto parts, biological medicine, universities and colleges, etc.. We also reach cooperation arrangements with domestic first line manufacturers of mechanical equipment and measuring equipment, sell various types of mechanical measurement and testing equipment, such as vibration system, shock / bump system, centrifuges, tilting and swing system, CMM (coordinate measuring machine) and various nonstandard customized mechanical equipment, to satisfy the diversified demands of customers. We keep professionalism, dedication and innovation, constantly increase our technical power, create good conditions of new equipment and technology to all our customers. We are proud of your successes and sincerely hope for long term and mutually beneficial cooperation with you.
Similar Product Recommend