Welcome Customer !

Membership

XwbooGeneral Machinery Valve Other ValvesElectronic electric angle control valve
  • $item.Title
  • $item.Title

Electronic electric angle control valve

Shanghai Hufa Fluid Technology Co., Ltd.

Model
Nature of the Manufacturer
Manufacturer
Product Category
Other Valves
Place of Origin
ShangHai, ShangHai
Model: ZDLSNominal diameter: DN20 ~ 300mmNominal pressure: PN1.6 ~ 6.4MPaOperating temperature: common -40 ~ 230 ℃; heat sink 230 ~ 450 ℃, special order 450 ~ 600 ℃Main material: ZG230- 450, ZG1Cr18Ni9Ti, 316,316L, abrasion-resistant alloyDrive: electricDesign criteria: GB / T17213Inspection standards: GB / T4213Flange standard: JIS B220, JB / T79, ANSI B16.5-1981, GB / T9113 , HG20594-97, HG20618-97 and the like

ZDLS electronic angle valve by the PS series and the 3610 series of straight-stroke electric actuator and low flow resistance through the single-seat valve. Electric actuator for the electronic integration structure, with a servo amplifier, the input control signal (4-20mADC or 1-5VDC) and the power to control the valve opening, to pressure, flow, level, temperature and other parameters adjust. With sensitive action, simple connection, large flow, small size, high regulation accuracy. Angular pressure regulating valve is aimed at regulating valve in the high pressure or high pressure, severe cavitation, erosion under harsh working conditions, short life, easy to break the stem, easy to fall off the serious problems of research and development of products. It uses multi-stage throttling form to apportion the pressure difference, reduces the cavitation, the erosion, the deflection damage, greatly enhanced the service life of the regulating valve, especially in the urea system life expectancy than the ordinary high-pressure valve enhances 2-3 times . The valve body is right angle, the valve core is a single guide structure, the flow path of the valve body is simple and the resistance is small. It is especially suitable for the adjustment of fluids with high viscosity and containing suspended matter and granular media to prevent coking, sticking and clogging.
 

First, ZDLS electronic electric angle valve main technical parameters

Nominal diameter (mm) 6 10 15 25
Seat diameter (mm) 3 4 6 4 5 7 8 10 6 7 8 10 12 7 8 10 12 16 20
Flow coefficient Kv 0.04 0.1 0.1 0.4 0.4 1 1.6 2.5 4 6.3 8
0.16 0.4 0.16 1 1.6 2.5 0.63 1 1.6 2.5 4
0.063 0.25 0.25 0.63
Nominal diameter (mm) 32 40 50 65 80 100 125 150 200
Seat diameter (mm) 16 20 30 20 38 30 50 38 65 50 80 65 100 65 125 100 150 125 200
Flow Coefficient 6.3 8 16 8 25 16 40 25 63 40 100 63 160 100 250 160 400 250 600
Adjustable range R = 20: 1 for Kv values <18 and R = 30: 1 for Kv values> 18
Nominal pressure 1.6, 4.0, 6.4, 10, 16, 22, 32 MPa
Spool form Sleeve-guided single-seat spool valve
Flow characteristics straight line
The role of form Electric open, electric customs
Operating temperature Ordinary -40 ~ 230 ℃; heat sink type 230 ~ 450 ℃, special order 450 ~ 600 ℃
Flange standard In line with JB / T2769-92 standards, according to ANSI, JIS, DIN and other orders for the production
control signal 4 ~ 20mA.DC; 1 ~ 5V.DC; 0 ~ 10V.DC (with the implementation of the agency)
power supply S220V.AC, 50HZ; 380V.AC, 50HZ (with the implementation of the agency)


Nominal diameter (mm) 20 25 40 50 65 80 100 150 200 250 300
Seat diameter (mm) 10 12 15 20 25 32 40 50 65 80 100 125 150 200 250 300
Flow coefficient Kv 1.6 2.5 4 6.3 10 16 25 40 63 100 160 250 400 630 1000 1600
Adjustable range 30: 1
Nominal pressure Standard products 1.6,4.0,6.4 MPa;
Spool form Single-seat spool valve
Flow characteristics Straight line, equal percentage
Operating temperature Ordinary -40 ~ 230 ℃; heat sink type 230 ~ 450 ℃, special order 450 ~ 600 ℃
Flange standard Meet the JB78-59, JB79-59 standards, according to JB / 79.1-94, JB / 79.2-94, ANSI, JIS, DIN and other orders for the production

Note: The working temperature, the nominal pressure, the nominal diameter of the products beyond the scope of the list can be resolved with the business negotiations.
 

Second, ZDLS electronic electric angle valve performance indicators

Leakage rate: Class IV, less than 10-4 rated flow

Back to the difference: with 3610L actuator is 2.0%;

With PSL actuator is 1.0% Basic error:

With 3610L actuator is ± 2.5%;

With PSL actuator is ± 1.0%

Note: The test packing used for the standard PTFE packing.


Third, the electronic high-voltage electric angle control valve main dimensions

Nominal diameter (mm) 20 25 32 40 50 65 80 100 125 150 200
L1 (mm) 98 105 105 120 135 190 225 270 315 367
L2 (mm) PN1.6MPa 85 95 115 115 130 145 155 175 200 240 300
PN4.0MPa 85 95 115 115 130 145 155 175 200 240 300
PN6.4MPa 100 115 130 130 150 170 190 215 250 275 325
With PSL H (mm) normal type 753 761 789 778 793 819 858 893 921 951 956
Heat sink type 883 891 919 908 923 892 1021 1056 1120 1150 1156
D (mm) 176
Weight (KG) 13.5 22.5 25.5 29.5 50 60 78 119 157 255
With 361L H (mm) normal type 516 542 552 688 744 783 818 976 1006 1036
Heat sink type 646 654 682 818 907 946 981 1175 1205 1235
D (mm) 225 310
Weight (KG) 21 30 33 41 45 65 75 93 172 210 308

Note: The data in this table is standard configuration data, which will vary with actuator configuration.


  Hufa Holding Co., Ltd. Is a well-known manufacturer and supplier of common valves such as emergency cut-off valve, pressure reducing valve, regulating valve, chemical valve, water control valve and electric two-way valve.Mainly used in petroleum, chemical, steel, metallurgy, building materials, light industry, electricity, environmental protection, food and other industries, products throughout the country and are used in many national key projects, but also exported to Asia, Europe and other regions.Main products include: solenoid valve, regulating valve, chemical valve, water control valve, electric two-way valve, general valve;6 main products for a variety of industrial needs to provide a full range of fluid control solutions.Hufa Holding Co., Ltd. strives to build a well-known high-end control valve manufacturing enterprises, national high-tech enterprises, specializing in high-end control valve scientific research design, manufacturing and sales, technical exchanges, import and export trade in one of the international entity enterprise headquarters is located in zhejiang, the pump and valve capital of China.The company was founded in July 2004, Shanghai branch production base is located in Shanghai, construction area 1250 square meters, and has the domestic leading production equipment and multi-functional, intelligent valve inspection system and test center.Companies adhere to the advanced equipment localization and technical independent innovation, the pursuit of do the best employees, do the best products and the best enterprise goal, strive to build the company into a domestic first-class, the world level of control valve supplier, for the continuous development of automation industry to make greater contribution!Today's Shanghai valve brand has formed a technical system with independent intellectual property rights as the core, relying on science and technology for innovation;Set up r&d center, used in technical improvement, innovation and development of new products, and the introduction of the United States, Germany, Japan and other advanced level of technology and products, through the absorption and reference to manufacturing technology, perfect products, form with independent core high-end products, reduce the distance with the world's advanced products, in the domestic and international market to get customers' trust and respect.Related products have won many honors such as Shanghai high-tech achievements transformation, and won the high-tech enterprise in 2011.At the same time, the company is the first in the domestic industry through TS(pressure pipe components manufacturing license), explosion-proof electrical production license, ISO9001 (international quality management system), CE (European Union safety mark) and other quality systems and special industry requirements certification system. Hufa products are distributed throughout the country and applied in many national key projects, mainly used in petrochemical industry, aerospace, national defense, hvac, electric power equipment, biopharmaceutical, medical equipment, food machinery, environmental protection water treatment and other industries;Ju liang company and Shanghai baosteel, navy logistics, China petroleum group, tongfang shares, hangzhou holishi, kweichow maotai distillery, China nuclear power, the 12th national games of the main torch Taiwan and many other well-known enterprises and key projects to establish a good relationship of cooperation.Business philosophy of Shanghai Valve:Persist in not forgetting the original intention, continue to move forward; while pursuing the material and spiritual happiness of all Shanghai Valve partners, go all out to make perfect products and contribute to social progress.Company purposeTechnological innovation, quality assurance, honesty, efficiency and considerate serviceCorporate objectivesEstablish an international first-class control valve of Chinese enterprises.Company value
Similar Product Recommend