Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
Order data
Specification | Order No. |
CTSC-100 EM131 Analog Input Module, 4AI×12BIT, Voltage or Current Input, Isolation | CTS7 131-0HC10 |
Performance Parameters
| Specification | EM131, 4 AI×12BIT |
| Physical Features | |
| Dimensions(W×H×D) | 71.2×80×62mm |
| Power Loss(dissipation) | 2W |
| Power Consumption | |
| From +5V(from I/O bus) | 34 mA |
| From L+ | 40 mA |
| L+ voltage range,class 2 or DC sensor supply | 20.4~28.8V DC |
| LED indicator | 24 VDC Power Supply Good ON = no fault, OFF = no 24 VDC power |
Analog Input Feature | |
| Number of analog input points | 4 points |
| Isolation(field side to logic circuit) | no |
| input type | Differential |
| Input Range | |
| Voltage(unipolar) | 0~10V, 0~5V |
| Voltage(bipolar) | ±5V, ±2.5V |
| Current | 0~20 mA |
| Data Range | |
| Unipolar, full-scale range | 0~32000 |
| Bipolar, full-scale range | -32000~32000 |
| Input Resolution | |
| Voltage(unipolar) | 2.5 mV (0~10V) 1.25 mV (0~5V) |
| Voltage(bipolar) | 2.5 mV (±5V) 1.25 mV (±2.5V) |
| Current | 5μA (0~20mA) |
| Analog to digital conversion time | <300μs |
| Analog input step response | 100ms |
| Common mode rejection | 40dB,DC to 60Hz |
| Common mode voltage | Signal voltage + Common mode voltage < 12V |
| Input Impedance | ≥10MΩ |
| Input filter attenuation | -3db @ 3.1kHz |
| Maximum input voltage | 30V |
| Maximum input current | 30mA |
| ADC resolution | 12BIT |
Calibration and Configuration
Location of the calibration and configuration switch
Input Calibration
The calibration adjustment will affect the instrumentation amplifier stage which follows the analog multiplexer. so the calibration affects all user input channels. Variations exist in the component parameters of each input circuit before the analog multiplexer will cause slight differences in the reading values between different channels connected to the same input signal even after calibration.
Configuration
| Unipolar | Full-S cale Input | Resolution | ||
| SW1 | SW2 | SW3 | ||
| ON | OFF | ON | 0 to 10V | 2.5mV |
| ON | OFF | 0 to 5V | 1.25mV | |
| 0 to 20mA | 5 uA | |||
| Bipolar | Full-Scale Input | Resolution | ||
| SW1 | SW2 | SW3 | ||
| OFF | OFF | ON | ± 5 V | 2.5mV |
| ON | OFF | ± 2.5 V | 1.25mV | |
Input Data Word Format
Size Diagram:

Wiring Diagram