Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
Order data
| Order Data | Order No. |
| CTSC-100 EM135, 4AI/1AQ×12BIT,,4input/1output,12BIT,Isolation | CTS7 135-0KD10 |
Performance Parameters
| Specification | EM135, 4 AI/1AQ×12BIT |
| Physical Features | |
| Dimensions(W×H×D) | 71.2×80×62mm |
| Power Loss(dissipation) | 2W |
| Power Consumption | |
| From +5V(from I/O bus) | 70 mA |
| From L+ | 48 mA |
| L+ voltage range,class 2 or DC sensor supply | 20.4~28.8V DC |
LED indicator | 24 VDC Power Supply Good ON = no fault, OFF = no 24 VDC power |
| Analog Input Feature | |
| Number of analog input points | 4 points |
| Isolation(field side to logic circuit) | Optical isolated: 500VAC, 1 minute |
| Input type | Differential |
| Input Range | |
| Voltage(unipolar) | 0-10V, 0-5V, 0-1V |
| Voltage(bipolar) | ±10V, ±5V, ±2.5V, ±1V |
| Current | 0~20 mA |
| Data Range | |
| Unipolar,full-scale range | 0~32000 |
| Bipolar, full-scale range | -32000~32000 |
| Input Resolution | |
| Voltage(unipolar) | 2.5 mV (0~10V) 1.25 mV (0~5V) |
| Voltage(bipolar) | 2.5 mV (±5V) 1.25 mV (±2.5V) |
| Current | 5μA (0~20mA) |
| Analog to digital conversion time | <300μs |
| Analog input step response | 100ms |
| Common mode rejection | 40dB,DC to 60Hz |
| Common mode voltage | Signal voltage + Common mode voltage < 12V |
| Input Impedance | ≥10MΩ |
| Input filter attenuation | -3db @ 3.1kHz |
| Maximum input voltage | 30V |
| Maximum input current | 30mA |
| ADC resolution | 15BIT |
| Analog Output Features | |
| Number of analog output points | 1 |
| Signal range | |
Voltage output Current output | ±10V 0~20mA |
| Resolution, full-scale | |
Voltage output Current output | 12BIT 11BIT |
| Data word format | |
Voltage output Current output | -32000~+32000 0~32000 |
| Accuracy | typical: ±0.5% of full scale; Worse: ±2% of full scale |
| Setting time | |
Voltage output Current output | 100μs 2ms |
| Maximum drive@24VDC power | |
Voltage output Current output | 5000 ohm, minimum 500 ohm, maximum |
Input Calibration
Configuration
Table 1 EM 135 Configuration Switch Table to select Analog Input Range and Resolution
| Unipolar | Full-Scale Input | Resolution | |||||
| SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | ||
| OFF | ON | OFF | OFF | ON | ON | 0 to 1 V | 250 uV |
| ON | OFF | OFF | OFF | OFF | ON | 0 to 5 V | 1.25 mV |
| ON | OFF | OFF | OFF | OFF | ON | 0 to 20 mA | 5 uA |
| OFF | ON | OFF | OFF | OFF | ON | 0 to 10 V | 2.5 mV |
| Bipolar | Full-Scale Input | Resolution | |||||
| SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | ||
| OFF | OFF | ON | OFF | ON | OFF | +1 V | 500 uV |
| ON | OFF | OFF | OFF | OFF | OFF | +2.5 V | 1.25 mV |
| OFF | ON | OFF | OFF | OFF | OFF | +5 V | 2.5 mV |
| OFF | OFF | ON | OFF | OFF | OFF | +10 V | 5 mV |
Table 2 EM 135 Configuration Switch Table to select Unipolar/Bipolar, Gain, and Attenuation
| EM 135 Switches | Unipolar/Bipolar Select | Gain Select | Attenuation Select | |||||
| SW1 | SW2 | SW3 | SW4 | SW5 | SW6 | |||
| ON | Unipolar | |||||||
| OFF | Bipolar | |||||||
| OFF | OFF | x1 | ||||||
| OFF | ON | x10 | ||||||
| ON | OFF | x100 | ||||||
| ON | ON | invalid | ||||||
| ON | OFF | OFF | 0.8 | |||||
| OFF | ON | OFF | 0.4 | |||||
| OFF | OFF | ON | 0.2 | |||||
Input Data Word Format
Note
12 bits readings of the analog-to-digital converter (ADC) are left-justified in the input data word format. The MSB is the sign bit: zero indicates a positive data word value. In unipolar format, the three trailing zeros cause the data word to be changed by a count of eight for each one-count change in the ADC value. In bipolar format, the four trailing zeros cause the data word to be changed by a count of sixteen for each one count change in the ADC value.
Output Data Word Format
The 12 bits readings of the digital-to-analog converter (DAC) are left-justified in the output data word format. The MSB is the sign bit: zero indicates a positive data word value. The four trailing zeros are truncated before being loaded into the DAC registers. These bits have no effect on the output signal value.
Wiring Diagram

Wiring Diagram
