Membership
Help
COTRUST TECHNOLOGIES CO., LTD.
COTRUST TECHNOLOGIES CO., LTD.
Order Data
Order Data | Order No. |
CTSC-200 EM231,8×PID、current input 、0~20mA or 4~20mA | CTS7 231-7HF32 |
Performance Parameters
Specification | EM231, 8×PID |
Physical Features | |
Dimensions(W×H×D) | 71.2×80×62mm |
Power Loss(dissipation) | 1.2 W |
Power Consumption | |
From +5V(from I/O bus) | 30mA |
From L+ | 39mA |
L+ voltage range,class 2 or DC sensor supply | 20.4~28.8V DC |
LED indicator | 24 VDC Power Supply Good: ON = no fault ,OFF = no power ; SF: ON=module fault, Blink=input signal error, OFF=normal; |
Analog Input Features | |
Input type | current input |
Input range | 0~20mA |
Number of analog input points | 8 points |
Isolation | |
Field to Logic Field to 24V DC 24V DC to logic | 500V AC 500V AC 500V AC |
Common mode input range (input channel to input channel) | 120V AC |
Common mode rejection | >120dB@120V AC |
Input resolution | |
Temperature Voltage | 0.1℃/0.1℉ 15 bits plus sign |
Measuring principle | Sigma-Delta |
Module update time for all channel | 825ms |
Wire length to sensor, maximum | 100 m |
Wire loop resistance | 100Ω |
Suppression of interference | 85dB@ 50Hz/60Hz/400Hz |
Data word format | Voltage: -27648 to +27648 |
Input impedance | ≥1MΩ |
Maximum input voltage | 30V DC |
Input filter attenuation | -3dB@ 21kHz |
Basic error | 0.1% FS(Voltage) |
Repeatability | 0.05% FS |
Cold junction error | ±1.5℃ |
24V DC supply voltage range | 20.4 to 28.8 VDC |
Diagnostic program | LED:EXTF,SF |
PID Features | |
PID arithmetic | PID+FUZZY argument auto-tuning |
Sampling time | 1 second |
Minimum output pulse time | 10 ms |
PID type | P、PI、PD、PID |
PID output type | Analog or PWM |
PID output polarity | Bipolar or unipolar |
Configuring PID Address
Calculating the PID address
PID address | Formula | Note |
Address for PID argument | A=(2048+S*256)+16*C | S is the installing slot No. of the module (0~6) C is the point no.( 0~7 for 8PID module ) |
Address for PID positive pulse | X=(2048+S*256)+12 | |
Address for PID negative pulse | Y=(2048+S*256)+13 |
PID argument output (Module to CPU)
Description | Address | Setting Value | Actual Value |
Actual temperature | VM A | 0~13000 | 0~1300℃ |
Status word | VM A+2 | data read | |
PID analog output | VM A+4 | -32000~32000 | -32000~32000 |
PID argument input (CPU to module)
Description | Address | Setting Value | Actual Value |
Setting temperature | VM A+128 | 0~13000 | 0~1300℃ |
Control bytes | When VB A+130 is zero | When VB A+130 is 1 | |
V( A+130).0 | PID disable, no output | PID enable | |
V( A+130).1 | Integral is always active and Kp is not auto tuning | Integral is not active and Kp is auto tuning | |
V( A+130).2 | Unipolar PID output, 0~32000 | Bipolar PID output, 32000~32000, with calefaction and cooling function | |
V( A+130).3 | Unused | ||
V( A+130).4 | Integral is active | Integral is not active | |
V( A+130).5 | Differential is active | Differential is not active | |
V( A+130).6 | Filteing for input | Not Filtering for input | |
Pulse output cycle for PID | VW A+132 | 1~255 | 1~255 seconds |
Kp | VW A+134 | 0~9999 | 0~999.9 |
Ti (Integral time) | VW A+136 | 0~3600 | 0~3600 seconds |
Td (differential time) | VW A+138 | 0~3600 | 0~3600 seconds |
Address for positive pulse output
point 0 | V X.0 |
point 1 | V X.1 |
point 2 | V X.2 |
point 3 | V X.3 |
point 4 | V X.4 |
point 5 | V X.5 |
point 6 | V X.6 |
point 7 | V X.7 |
Address for negative pulse output
point 0 | V Y.0 |
point 1 | V Y.1 |
point 2 | V Y.2 |
point 3 | V Y.3 |
point 4 | V Y.4 |
point 5 | V Y.5 |
point 6 | V Y.6 |
point 7 | V Y.7 |
Size Diagram

Wiring Diagram


| Sw1 | Sw2 | Sw3 | Sw4 | Sw5 | Sw6 | range | resolution |
| ON | ON | OFF | OFF | OFF | OFF | 0—20mA | 0.1℃/F |
| ON | ON | ON | OFF | OFF | OFF | 4—20mA | 0.1℃/F |