Welcome Customer !

Membership

XwbooElectrical & ElectronicsLow Voltage ApplianceSpeed GovernorESC5111 Electronic governor
  • $item.Title
  • $item.Title

ESC5111 Electronic governor

Dongguan Tuancheng automation equipment Co., Ltd

Model
Nature of the Manufacturer
Other
Product Category
Speed Governor
Place of Origin
,
ESC5111 Electronic governor
Introduce
Product:
User manual:
Software Download:

Product description:

The ESC5111 Series speed control unit is an all electronic device designed to control engine speed with fast and precise response to transient load changes. This closed loop control, when connected to a proportional electric actuator and supplied with a magnetic speed sensor signal, will control a wide variety of engines In an isochronous or droop mode. It is designed for high

reliability and built ruggedly to withstand the engine environment.


Simplicity of installation and adjustment was foremost in the design. Non-interacting performance controls allow near oplimum response to be easily obtained.


Other features include; adjustable droop and Idle operation, Inputs for accessories used in multi-engine or special applications,ages,protection against reverse battery voltage, transient volt-

accidental short circuit of the actuator and fail-safe design in the event of loss of speed sensor signal or battery supply.

 

Main features:

1、 All electronic closed-loop control design; 

2、 Easy to install and can be pre-adjusted; 

3、 Adjust the idle speed is adjustable and work, to help for entering multiple machines or special purpose machines; 

4、The actuator short circuit fault protection and safety in case of loss of speed sensor signal or power of.


Specifications:

Input   Supply:12 or 24 VDC Battery System (Transient and Reverse Voltage)

          Polarity:Negative Ground (Case Isolated)

          Power Consumption:50 ma continuous plus actuator current

         Actuator Current Range @77°F (25 °C) - (Inductive Load):Min.2.5 Amps; Max. 10Amps continuous

         Speed Sensor Signal:0.5-120 Volts RMS

         Speed switch Relay contacts(N.O.and N.C):10 Amps

Performance Isochronous Operation/Steady State Stability:±0.25% or better

         Speed Range/Governor:  1K to 7.5K Hz continuous

         Speed Drift with Temperature:    ±1% Max

         Idle Adjust CW:  60% of set speed

         Idle Adjust CCW: Less than 1200 Hz.

        Droop Range:1-5% regulation

        Droop Adj. Max. (K-L Jumpered):400 Hz., ±75Hz. Per 1.0A change

        Droop Adj. Min. (K-L Jumpered):15Hz., ±6Hz. Per 1.0A change

        Speed Trim Range:±200 Hz

        Remote Variable Speed Range:500 - 7.5 Hz. Or any part there of Terminal Sensitivity

        Terminal Sensitivity J: 100 Hz., ± 15Hz / Volt @ 5.0 K Impedance

        Terminal Sensitivity L:        735 Hz., ±60 Hz / Volt @ 65 K Impedance

        Terminal Sensitivity N:148 Hz., ±10 Hz / Volt @ 1 Meg. Impedance

        Terminal Sensitivity P:10 VDC Supply @ 20 ma Max

        Speed witch adjustment range:1000-10000HZ

EnvironmentalAmbient Operating Temperature Range:-40 to +180°F(-40°+85 °C)

        Relative Humidity:Up to 95%

       All Surface Finishes:Fungus Proof and Corrosion Resitant

ReliabilityVibration:1G @ 20 to 100 Hz.

        Testing:99% Functionally Tested

physical Dimensions:See outline (FIGURE 1)

       Weigh1: 1.8 lbs.(820 grams)

       Mounting:Any position, Vertical Preferred


 


Dongguan Tuancheng Automation Equipment Co., Ltd is joint venture with Singapore LIXiSE company. Registered in 2013(formerly known as Dongguan Feirui Electronics Co., Ltd. ) which is located in SI Kai Wei industrial park. Our company is committed to developing, producing and selling in the three series products of generator controller ,digital voltage regulator and digital speed governor, which are over than 50 kinds of generator peripheral smart products. We devote ourselves to promoting the application of remote monitoring technology and solutions of systems integration.Our products are exported to 30 countries and areas such as Southeast Asia, the Middle East and Africa, highly recommended by domestic and foreign customers. We always adhere to the refined and specialized production management. In 2009 we introduced the NI simulation and automation testing equipment and are the first company to introduce the AOI testing equipment of Intra-industry. It helps us maximum reduce the ricketiness of soldered or welded. Based on the 6 years technology accumulation, we have a world-leading R&D team. Especially the Singapore parallel technology is in the industry-leading position and obtains many national patents. In 2013 the German powerful certification authority award us ISO9001 quality system certification and we also passed CE certification.Our mission: to promote the development of China’s intelligent generator.Our vision: to make each generator in the world has an intelligent heart.
Similar Product Recommend