Welcome Customer !

Membership

XwbooElectrical & ElectronicsBatteryLithium BatteryEVE 3.2V105AH prismatic cell
  • $item.Title
  • $item.Title

EVE 3.2V105AH prismatic cell

Beijing XD Battery Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Lithium Battery
Place of Origin
,
Please refer to the specifications.MOQ: 100 PCS

Nominal Technical Parameter

No.

Item

Parameter

Remark

1

Nominal capacity

105Ah

(25±2)℃, Standard charge/discharge.

2

Nominal voltage

3.2V

3

AC Impedance resistance (1KHz)

≤0.5mΩ

4

Standard charge/discharge

Current of

charge/discharge

0.5C/0.5C

(25±2)℃

Cut-off voltage of

charge/discharge

3.65V/2.5V

5

Maximum current of charge/discharge

Constant charge/discharge

1C/1C

Refer to constant/pulse charge or discharge MAP

Pulse

charge/discharge (30s)

1C/3C

6

Recommend SOC window

10%~90%

N.A.

7

Charge temperature

0℃~55℃

Refer to constant/pulse charge or discharge MAP

8

Discharge temperature

-20℃~55℃

9

Storage temperature

1 month

-20℃~45℃

N.A.

1 year

0℃~35℃

10

Storage humidity

<95%

11

Self-discharge rate per month

≤3%/per

month

(25±2)℃,30%~50%SOC

storage

12

Size

Width

130.3±0.3mm

Refer to appendix 1

13

Thickness

(30%-40%SOC)

36.7±0.5mm

14

Height (total)

200.5±0.5mm

15

Height (subject)

195.5±0.5mm

16

Tabs distance

67.0±1.0mm

17

Weight

1980±100g


Test Environment

Temperature:(25±2)°C Relative humidity:15%~90%

Atmospheric pressure:86KPa~106KPa

Standard Charge

At (25±2)℃, the cell is charged by a constant current of 0.5C (A) to the cut-off voltage 3.65V, then kept at this voltage until the current is less than 0.05C (A).

Standard Discharge

the cut-off voltage 2.5V.


Electrical Performance

No.

Item

Requirements

Measuring Procedure

1

Rate discharge ability at 25℃

Discharge capacity / Nominal capacity×99% A) 0.5C(A)≥99%

B) 1.0C(A) ≥99%

After standard charged, the cell undergo a rest for 1h, then is discharged by current 0.5C(A)、1.0C(A) respectively to cut-off voltage 2.5V. This test is allowed to be repeated for 3 times if the discharge capacity fails to meet the technical requirements.

2

Discharge ability at different temperature

Discharge capacity / Nominal capacity×99% A) 55℃ ≥95%

B) -20℃ ≥70%

A) After standard charged, the cell undergo a rest for 5h at (55±2 )℃, then is discharged by current 1.0C(A) to cut-off voltage 2.5V;

B) After standard charged, the cell undergo a rest for 24h at (-20±2)℃, then is discharged by current 1.0C(A) to cut-off

voltage 2.0V.

3

The capacity retention and recovery at 25℃

Capacity Retention≥95% Capacity Recovery≥97%

After standard charged,the cell undergo a rest for 28 days, then is discharged by current 1.0C(A) to cut-off voltage 2.5V. The discharge capacity is capacity retention. After standard charged again,the cell undergo 30min’s rest , then is discharged by current 1.0C(A) to cut-off voltage 2.5V. The discharge capacity is capacity recovery.

4

Cycle life at 25℃

≥3500 cycle @1C/1C

At (25±2)℃, 300kgf clamp force: the cell is charged by current 1.0C (A) to 3.65V, then kept at this voltage until the current is less than 0.05 C(A), followed by 30min rest, subsequently the cell is discharged by current 1.0C (A) to 2.5V . Cycle continues until the capacity decays to 80% of the nominal capacity

5

End-of-life management

Discharge capacity / Nominal capacity <>

The cell shall be stopped using when the life limit is exceeded.


Safety Performance

No.

Item

Requirements

Measuring Procedure

1

Overdischarge

No fire、explosion、electrolyte leakage

Reference: GB/T 31485-2015 《 safety requirements and test methods for power batteries for electric vehicles》

2

Overcharge

No fire、explosion

3

Shortcircuit

No fire、explosion

4

Dropping

No fire、explosion、electrolyte leakage

5

Heating

No fire、explosion

6

Crushing

No fire、explosion

7

Prisking

No fire、explosion

8

Seawater immersion

No fire、explosion

9

Temperature cycle

No fire、explosion、electrolyte leakage

10

Low pressure

No fire、explosion、electrolyte leakage


Transportation

The cells should be packed into boxes under the charge of 30% ~ 50%SOC. During the transportation, they should be protected from severe vibration, shock , extrusion, sun or rain.

Storage

Cells should be stored (more than 1 month) indoor with a dry and clean environment at

0 ℃~35 ℃, and charged and discharged every 6 months. Keep the last charge under 30%~ 50%SOC.


Attentions

1、It is necessary to ensure that the voltage, current and temperature of the cell are monitored and protected when the cell is charged and discharged.

2、Please keep the cell away from heat source, fire source , strong acid, strong alkali and other corrosive environment.

3、Do not short connect or install the battery with incorrect polarity at any time.


4、Do not mix up with cells from different models or manufacturers.

5、Do not use external force to make the cell fall, impact, puncture, do not disassemble the cell or change the external structure.

6、Please keep the cell’s charge under 30% ~ 50%SOC, and avoid direct sunlight or high temperature and humidity environment when the battery is not used for a long time,

7、Please wear protective devices such as rubber gloves when operating the battery.

8、Please immediately stop using if there have leakage, smoking or damage with cell , and contact our company to deal with.

Two-dimensional Diagram



Electrical Performance Diagram

Rate discharge curve at 25℃


Discharge curves at different temperature



Found in 2006, Beijing XD Battery is a member of China Power Supply Society, as a National-level High and New Technology Enterprise, as well as the nominated supplier of Government procurement site, we are focusing on the solution of renewable energy storage.We specialize in1, RVs lithium Batteries.2, Marine lithium batteries3, Solar energy storage lithium batteries4, Low speed vehicles lithium batteries5, Telecom lithium batteries.The products passed TUV , UL , CE ,CSA ,CEC ,JET certifications.There are three representative offices in the Greater China area, which are located in three first-tier cities, Beijing,Shanghai and Shenzhen.Our battery pack factory is in Huizhou with an area of over 5,000 Square Meters, our production capacity has reached 1.2 million units per year.There is equipped with the most modern production equipment. By means of several times of large-scale technology improvement with some domestic and overseas professional organizations and relative companies, our product quality, technology and service can be rated as world-class level.Machine productions to promise good quality all the time. 24 hours calling service to offer good after sales service support. Accept customized order, Offer OEM, ODM service.Currently XD Battery have been exported to more 126 different countries ,such as USA, UK, Germany, Japan, Korea, Philippines, Saudi Arabia, Zimbabwe, Netherlands, Australia, France, Spain, Netherlands, Vietnam, Nigeria, Sweden ,etc.Top technology, Top quality, Top service which is always our aim. Welcome to join XD Battery bring more energy to the world.
You May Like
Similar Product Recommend