Welcome Customer !

Membership

XwbooMachine ToolSpecial Machine ToolsLaser Cutting MachineFiber Sheet Laser Cutting Machine
  • $item.Title
  • $item.Title

Fiber Sheet Laser Cutting Machine

JINAN CGJG LASER EQUIPMENT CO., LTD

Model
Nature of the Manufacturer
Manufacturer
Product Category
Laser Cutting Machine
Place of Origin
ShanDong, JiNan
The lathe bed of worktable is welded using square tubes after stress relieving with the bearing capacity of 1500kg. Adopt imported transmission and servo motor for good dynamic performance and high-precision cutting with small deformation and smooth beautiful appearance.

Product Introduction

N-1_

Product Introduction:

The lathe bed of worktable has good bearing capacity because it is welded using square tubes after stress relivving.

At the same time,the machine has the advantages as following:

good dynamic performance

High-precision cutting

Small deformance and smooth beatiful appearance

Technical Parameters:

Machine Model

CG-4015

Working area

4000mm*1500mm(Optional)

Laser power

1000W~6000W

Repeat positioning accuracy

±0.02mm

Max. acceleration

1.0G

Maximum speed

90m/min

Specified voltage and Frequency

380V 50Hz/60Hz/60A

Color

White +Gray

Logo

Customized Service

Z Travel

100mm

Key Parts:

image003

Aviation Aluminum Gantry:

As the gantry is made of aluminum alloy based on the aerospace standard, the weight is reduced by half compared with the previous products.But the greatly improve the overall strength ,stiffness and stability.

image005

Segmented Rectangular Welded Bed:

The worktable adopts square tube welding machine and stress relief annealing treatment. The maximum load-bearing of the worktable can reach 1500kg, and is equipped with universal ball bearing. The peripheral clamping device is set outside the machine, and the fully enclosed dust-proof device, photoelectric sensor and other precision positioning components are used to ensure the transmission accuracy.

image007

Cutting Head:

The optimized optical configuration and smooth and efficient air flow design ensure high precision and strong stability; the focusing range is large, the perforation focal length is increased, and the perforation focal length and cutting focal length are set respectively to improve the cutting accuracy.

image008(001)

Transmission and Precision:

CG Fiber laser cutting machine is equipped with Japan YASKAWA Servo Motor, France MOTOVARIO reducer. It makes sure that the machine positioning accuracy is ±0.02mm,and the cutting acceleration is 1.0G. The service life is more than 10 years.

image010(001)

Servo Driver and Motor-YASKAWA:

Adopt Japan YASKAWA motor ,no adjustment function,real-time use,automatic tuning function,excellent performance.

image012

Gear and Rack-Taiwan Apex:

High precision and transmission efficiency,accurate instantaneous transmission ratio and long service life.

image018(001)

Water Chiller--S&A:

High Power industrial water cooling system cools the fiber laser source and optical lens.

Cutting Material and Range

For cutting a variety of materials, mainly used in carbon steel, stainless steel, a variety of aluminum alloys, brass, copper, aluminum, pickling board, galvanized plate, silicon wafers, electrolytic plates, titanium alloys, manganese alloys, a variety of alloy plates, rare metals and other metal materials of two-dimensional flat cutting.

Cutting Range:

Carbon Steel: 0.5-16mm

Stainless Steel: 0.5-5mm

Aluminum alloy:0.5-5mm

Brass: 0.5-3mm

Cutting Samples

image020

Application Area

It is widely used in electrical manufacturing, electric cabinet, high-resolution device, mechanical device, electrical equipment, advertising signs, auto parts, display equipment and hardware processing.

image021(001)

  JINAN CGJG LASER EQUIPMENT CO., LTD (CGJG Laser) was founded in 2017, The company focuses on the R&D, manufacturing and sales of high-power laser processing equipment, including high-power laser cutting machine, laser welding machine and multi-functional laser processing equipment, to provide customers with personalized and professional laser processing system solutions. The main products of super laser cover the full power series of optical fiber laser cutting series, laser marking series, laser processing special equipment and cutting complete equipment, etc. the products are widely used in iron and steel metallurgy, non-ferrous metals, auto and parts, aerospace, military electronics, precision instruments and meters, machinery manufacturing, hardware tools, integrated circuits, solar energy and other industries.The production base in Jinan covers an area of 40,000 square meters, with dozens of high-precision imported CNC machining centers and large-scale gantry milling machines. The total value of production equipment exceeds 5 million US dollars. It realizes independent research and development design and high-precision manufacturing of the core components of the cutting machine. The company has more than 300 talents of various types and has an annual production capacity of 1,000 fiber laser cutting machines, of which more than 1,000 laser pipe cutting machines have been sold in total, and the products are sold in more than 60 countries and regions around the world.
Similar Product Recommend