Membership
Help
JAYE HEATER TECHNOLOGY
JAYE HEATER TECHNOLOGY
Flange immersion tubular heater made by Jaye industry as a core heating elements in the heating system of liquid heating, has good sealing performance, among which high density heater is the best ideal product for compressor heating. The product has large output power and can be built-in temperature sensor. The junction box can be designed as waterproof, dustproof, explosion-proof and other types according to user requirements.
The immersion heater is made of electric heating element and flange combination, and is suitable for heating oil, water, viscous liquid, molten material and gas in large, medium and small containers and storage tanks.

Features of Flange Immersion Tubular Heaters:
1. Use high-quality SUS304 stainless steel seamless pipe, high-quality heating wire and magnesium oxide powder.
2. The maximum operating temperature can reach 850 degrees. The PID control system is used to adjust the output power of the electric heater after calculation according to the temperature sensor signal, and realize the temperature control of the resistive load of the heating element.
3. The heater efficiency is as high as 95%.
4. It is durable and has a service life of up to ten years. When the interlocking protection device is over-temperature or low-liquid level, immediately cut off the heating power to avoid burning out the heating element.
5. The shape and power can be customized.
6. The connection method can adopt flange type or threaded end face seal.
Selection Guide of the Flange Immersion Tubular Heaters:
Application | Sheath Material | Typical Watt | Screw Plug Material | |
Density(w/cm²) | ||||
Water, Freeze protection, Hot water storage, | ||||
Boiler and water heaters, Cooling towers, | Stainless Steel 304 316L | 8w/cm² | Stainless Steel or Brass | |
Solution not corrosive to copper, Food | or Copper | |||
equipment | ||||
Oil, Heavy and non-circulated oils, Solution | Stainless Steel 316L | |||
water, Corrosive solutions, Steam super | 2.5w/cm² | Stainless Steel | ||
310s or Incoloy | ||||
heating | ||||
Light oils , In forced oil circulation loops | Stainless Steel 304 316L | 4.5w/cm² | Stainless Steel | |
Mildly corrosive solutions | Stainless Steel 316L | 8w/cm² | Stainless Steel | |
310s or Incoloy | ||||
Fluid heat transfer media, Tar, High to low | ||||
viscosity petroleum oils, Asphalt, Wax, | Stainless Steel 304 316L | 2.5w/cm² | Stainless Steel | |
Paraffin, Degreasing solvents, Alcohol, | ||||
Molten salt, Solutions not corrosive to steel | ||||
Process water, Soap and detergent | ||||
solutions, Soluble cutting oils, Demineralized | Stainless Steel 304 316L | 4.5w/cm² | Stainless Steel | |
or deionized water |
Order Guide:
If you have an order or enquiry, please let us know the below information:
The size of the flange thread.
The diameter and length of the tube.
The material of the pipe or working condition.
Voltage and watt needed
The quantity of the tubular heater need.
If you have a technical drawing would be great helpful for us to quick check the cost.


