Welcome Customer !

Membership

XwbooPaper machineryPapermaking Auxiliary EquipmentSlurry PumpFleck slurry pump
  • $item.Title
  • $item.Title

Fleck slurry pump

Nantong Fleck Fluid Equipment Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Slurry Pump
Place of Origin
,
Fleck slurry pump

The FLK-JLS Fleck Slurry Transfer Pump is a professional type of extrusion shear conveying with high viscosity and a large amount of granular slurry. The material contact part of the Fleck slurry transfer pump is made of high quality stainless steel. The feed waist part is cast with high quality gray cast iron HT300. At present, Fleck slurry transfer pump is widely used in ore slurry, fish, crab and shrimp. Various kinds of slurry containing a large amount of particles such as shellfish are transported in a completely closed pipeline.

Fleck slurry pump

Corresponding parameter set not found, please add it in property template of background
modelProcessing capacity m³/hMotor Power kwRotating speed r/minImport and export size mm
FLK-JLS1501-42kw30-40100/80
FLK-JLS2003-83kw30-40125/100
FLK-JLS2505-125kw30-40150/125

The main structure of the Fleck slurry pump

The main structure of FLK-JLS Fleck slurry conveying pump is composed of motor, reducer, coupling, pump casing and so on. The working chamber in the pump casing is composed of a spring-pressure type semi-fox type baffle, a copper alloy wear pad, a waist wheel and the like. The material of the waist runner and the shell is made of high-quality gray cast iron TH300, and then a slurry transfer pump is finally assembled by model machining center, casting and precision machining. Import and export are generally designed for the upper side and the other.

How does the Fleck slurry pump work?

FLK-JLS type Fleck slurry transfer pump working principle: It is mainly used for all kinds of high viscosity and contains a large number of granular slurry for extrusion shear conveying. The Fleck slurry transfer pump will contain a large number of large and small particles under the motor drive. The slurry is sucked from the side inlet, and enters the closed compartment at the bottom of the casing as the waist wheel rotates. Since the fox-shaped waist wheel is a figure-eight structure, the gap between the two semi-circular wheels and the casing is small, and the slurry is in the fox. The squeezing push of the waist belt constantly moves upwards. At the same time as the fox waist wheel rotates, there is also a small runner with a pressure spring. The pressure plate also rotates with the surface of the fox waist wheel, but the combination is small. The pressure plate of the wheel also moves up and down with the small wheel. Due to the spring pressure, the pressure plate of the small wheel is close to the shell wall of the outlet bin under the condition of continuous up and down displacement, so that the slurry can not be reflowed, and the slurry is more effectively blocked. And the backflow of air causes a certain amount of vacuum to be generated at the inlet, and the large particle slurry is re-inhaled into the working chamber to circulate. A small revolver, such as a comet on the fox-shaped waist wheel, continuously moves with the track of the fox-shaped waist wheel to drive the pressure plate to effectively block the backflow of the slurry, so that the large particle slurry sent up continuously is transported upward, and the delivery head is transported. Up to 10-20 meters.

Accessories: Equipment selection parameters and technical requirements (downloadable)

 First, the technical parameters of your company's materials:
Material medium Processing capacity(m³/h)
Liquid category□Water-based, □Oily, □SolventSolid category□Agglomerate, □Crystals, □Primary particle
Liquid to solid ratio(%)      Viscosity Pa.s Material flow□Very good (water), □可以, □difference, □Very poor
Feed containsLarge particles mm,Take up %Medium particle mm,Take up %Small particles mm,Take up %
Solid particles(□fragile, □Not fragile, □Viscous)Discharge granule μmHead mtemperature ℃
Remarks:
 Second, your company's requirements for equipment:
 1. Material contact part material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □HastelloyC276
 2, rotating stator material□stainless steel 304, □stainless steel 316L, □Duplex steel 2205, □TA2, □Hastelloy C276,
□Wear-resistant steel NM500, □Wear-resistant steel 38CrMoAl, □Tungsten carbide treatment, □Emery treatment
 3, sealed□Ordinary single-sided mechanical seal, □Ordinary double-sided mechanical seal, □Custom double-sided mechanical seal
O-ring configuration□Ding O-ring, □Fluoro rubber O-ring, □Fluorine-containing O-ring, □Perfluoroether O-ring
Material contact surface□Tungsten carbide-silicon carbide, □Tungsten carbide-tungsten carbide, □Silicon carbide-silicon carbide
 4, the motor□Ordinary motor, □Inverter motor, □Ordinary explosion-proof motor, □Explosion-proof inverter motor, □Dust explosion-proof motor
□Class 2 energy efficient motor, □Marine motor, □Waterproof motor□Self-contained control box□With control box
 Third, the corresponding device model:
Full name of the equipmentModelProcessing capacitym³/h)Motor Power(kw)AmountRemarks
other


Fill in the unit:          Fill in the person:          phone:

Daily chemical industry: AES、LAS、AOS、MES、K12、Glycerin, sorbitol, fatty alcohol, shower gel, skin cream, shampoo, hand soap, toothpaste, soap, detergent powder, etc.

Fine Chemicals:Dyes, pigments, various pastes, chemical additives, adhesives, 107 glue, silicone oil, leather oil, emulsion explosives, various colloidal materials.

Food:Chocolate, condensed milk, yogurt, honey, syrup, sucrose, tomato juice, concentrated juice, jam, ice cream, milk, yeast mud, meat, jelly, condiments, vinasse, soy protein, flour, etc.

Paper production:Polyacrylamide (PAM), calcium carbonate, starch paste, carboxylated butylbenzene/propylbenzene latex, rosin, rosin gum, pulp, filler, dry strength: agent, wet strength agent, sizing agent, retention and drainage aid, elimination Foaming, coating, water treatment chemicals, etc.

Chemical fiber:Viscose porridge, PVA, vinylon pulp, acrylic pulp, amine pulp, polyester chips, polyester, polypropylene, rayon, functional fiber, etc.

Medical medicine:Various ointments, extracts, drug lotions, pill pastes, syrups, health products, pharmaceuticals, etc.

Coating:Paints, coatings, inks, insulating varnishes, resins, auxiliaries, organic solvents, etc.

暂未实现,敬请期待
暂未实现,敬请期待
Nantong Fleck is a high-tech enterprise in Jiangsu province integrating equipment research and development, design and manufacturing.The company is specialized in shearing crushing, dispersing emulsifying, crushing and grinding, homogenizing mixing of fluid material particles.At present, the company has passed ISO9001 system, ISO14001 system certification and CE Certification.In 2019, Nantong Fulek was officially listed on the "Science and Technology Innovation Board" of Jiangsu Equity Exchange Center. [Enterprise code: 695418]Nantong Fleck fluid Equipment Co., LTD., with the international advanced manufacturing technology as its tenet and the company's professional manufacturing level as its benchmark, has been constantly researching, exploring and developing high-end technologies in the fluid industry at home and abroad.Over the past two decades, with the unremitting efforts of the R&D team and the advocacy of advanced design and manufacturing concepts, Fulek has launched a number of innovative products, and has successively obtained 8 invention patents, 22 utility model patents and 12 high-tech products.It is the research and development of these high-tech products that have solved the technical problems of many enterprises in the process of shearing, grinding and refining of material particles, and improved the product quality of user enterprises.Created value for users, but also for the company's development direction laid a good foundation.At present, the company has 1 office building, 1 research and development building, dozens of experimental equipment and instruments, the production workshop area of nearly 4000 square meters.Company has a group of highly qualified r&d team, and southeast university, fudan university, east China university of science and technology, Harbin industrial university, nantong university, and many colleges and universities to achieve "production, study and research" long-term cooperation, in order to solve the fluid particles in deep crushing grinding and material in the nano emulsion and other technical problems have made unremitting efforts.
Similar Product Recommend