Welcome Customer !

Membership

XwbooInstrumentationTransmitterLevel TransmitterFloat Level Switch
  • $item.Title
  • $item.Title

Float Level Switch

Shanghai Sensoriot Technology Co., Ltd.

Model
Nature of the Manufacturer
Other
Product Category
Level Transmitter
Place of Origin
,
The float level switch uses magnetic force to operate and the magnetic float of the switch is used to rise or fall with the liquid level so that the reed switch chip at the set position in the sensor detection tube acts and sends out the contact opening (closing)conversion signal. Ziasiot float level switches are designed with connecting rod floats,side-mounted floats,etc. according to different application.

Product Overview

The float level switch is a passive mechanical liquid level control device adopting buoyancy and magnetic control principles. Featuring simple structure, stable performance and maintenance-free operation, it uses magnetic floats moving up and down with liquid level to trigger the on-off of reed switches inside the non-magnetic tube, and outputs switch signals.
It supports multiple measuring points, and is applicable to media like water, diesel oil, lubricating oil and corrosive chemical liquids. Widely used in water treatment, petrochemical, power, food & pharmaceutical, hydraulic systems and other industries, it realizes liquid level monitoring, high/low level alarm, pump start-stop and automatic tank loading & unloading. It can work reliably in normal pressure, pressure vessels and explosive hazardous areas.

Working Principle

Composed of magnetic float balls, sealed non-magnetic guide tubes and reed switch components, the device requires no external power supply. When the liquid level changes, the hollow float with built-in ring magnet moves along the guide tube. The magnetic force acts on the reed switches at preset positions to make them close or disconnect, then outputs Normally Open (NO) and Normally Closed (NC) switch signals.
Different from float level sensors that deliver continuous signals, this product only provides point switch signals. It features fast response and strong anti-interference, ideal for fixed-point liquid level interlock control with high cost performance.

Parameters

ItemSpecifications
Wetted MaterialSUS304, SUS316L, PP, PE, PTFE (customizable)
Medium Density≥0.55 g/cm³
Working TemperatureStandard: -20℃ ~ 120℃; High temp customized: ≤350℃
Working PressureMetal type: 1.0~3.5 MPa; Plastic type: 0~0.5 MPa
Output SignalPassive switch signal (NO/NC, SPDT)
Max Voltage250VAC
Contact Rating50W
Max Current0.6A
Measuring Length80 ~ 6000 mm
Connection TypeThread (M20×1.5), Flange (DN20~DN150), Quick Clamp
Protection GradeIP65 (IP68 optional)
Explosion-proof GradeExia II CT6Ga, Exd II CT6Gb
Max Control Points4

Features

1. No external power supply, passive output contact ;
2. Can be installed horizontally on the side wall of the bucket or vertically on the top of the bucket;
3. A simple structure, stable and reliable performance, and easy installation;
4. Long life span, stable and reliable operation, easy installation, almost no maintenance
5. Independent of mediums’physical and chemical status.
6. Applicable for all kinds of bad medium environments with density ≥0.55g/cm³.
7. Multiple materials and connection methods can meet different environmental requirements;
8. Available for interface detection of mediums with two different densities.
9. Wide application range. Pressure 1.0~3.0MPa, temperature max 350°C;
10. Anti-explosion design.
11. Customization.

Level Float Sensor

Dimensions

Float Level Switch-2

Float Level Switch-4

Application

Float level switch is widely used in shipbuilding, papermaking, printing, generator equipment, petrochemicals, food industry, water treatment, electrical engineering, fuel industry, hydraulic machinery, and other fields

Videos

Request A Quote

Shanghai Sensoriot Technology Co., Ltd. is an experienced manufacture of pressure and temperature sensors, transmitters; Melt pressure transmitters, melt temperature sensors, Internet of Things, laboratory instruments and automation with variety of brands such as Zias, Holeader, EMPS, Wu Hao MC, etc, which could be used in different industrial fields and process control.The main products developed and produced by our company consist of multiple series, including wireless sensors, flow sensors, linears, pressure sensors, liquid level sensors, high temperature melt pressure sensors , melt pressure gauge, high temperature melt pressure transmitter, temperature sensor, fusion index instrument, pressure calibration system, smart digital instrument, blasting switch, smart home system, smart module, smart body scale, laboratory instrument, Internet of Things, and Automated complete control system. We strive to innovate, advocate environmental protection, adhere to the concept of high quality and integrity, and are committed to developing into a technology manufacturing group enterprise of sensor Internet of things and automated control systems.
Similar Product Recommend